GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 11-16-2019, 17:57   #5116 (permalink)
No Life Poster
 
marcin7904's Avatar
 
Join Date: Jun 2006
Location: Poland Pruszków-Warszawa-Warka
Posts: 1,321
Member: 290272
Status: Offline
Thanks Meter: 431
Donate money to this user
Xiaomi REDMI 3S


Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: XIAOMI
Selected model: REDMI 3S
Please, select one of the options for "Reset Mi Account" operation or press Ok to continue...
Go to "Wi-Fi Settings" and forget connected Wi-Fi network or perform Wipe Data from recovery
Put the phone into EDL mode:
1. Power phone OFF;
2. Select 130 kOm on EDL cable;
3. Connect EDL cable while "EDL button" is pressing;
4. Release "EDL button" after 8 seconds.
Found phone on COM8
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0004F0E100000000
QC CPU: Snapdragon 430 MSM8937
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 3S
Device: land
Platform: msm8937
Android version: 6.0.1
Display ID: xiaomi.eu
Firmware version: 8.4.19
Resetting Mi Account...
On Your device detected FRP Lock! Reset it?
Reading MI part...
Writing MI part...
Resetting FRP lock..
Rebooting phone
Backup saved as Xiaomi_Redmi 3S_16-11-2019_17-51-10.dump file
Please power phone ON and enable "USB Debugging" then press "OK" button!

If operation wasn't completed, then Your device get re-locked and credits aren't refundable!
Searching for a phone (waiting for ADB / Fastboot device)...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: Xiaomi Redmi 3S
SW version: MMB29M
Date: So apr 21 10:35:55 BST 2018
Android version: 6.0.1
Baseband NNS_PACK-1.87716.2.103688.2-V052
Disabling Mi Services...
Mi Account is successfully reseted!
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-17-2019, 06:52   #5117 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 412
Member: 2924041
Status: Offline
Thanks Meter: 142
Platform: LENOVO
Selected model: TB-7304I
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM12
Port name: MediaTek PreLoader USB VCOM (Android) (COM12)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Lenovo_v.1, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4536324D.420389E8.CC280A53
eMMC Flash: Samsung: FE62MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo TB-7304I
Device: TB-7304I
Platform: mt6737m
Android version: 7.0
Display ID: TB-7304I_S000049_180828_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Lenovo_Lenovo TB-7304I_17-11-2019_11-51-41.dump file
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-17-2019, 06:52   #5118 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 412
Member: 2924041
Status: Offline
Thanks Meter: 142
Platform: LENOVO
Selected model: TB-7304I
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM12
Port name: MediaTek PreLoader USB VCOM (Android) (COM12)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Lenovo_v.1, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4536324D.420389E8.CC280A53
eMMC Flash: Samsung: FE62MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo TB-7304I
Device: TB-7304I
Platform: mt6737m
Android version: 7.0
Display ID: TB-7304I_S000049_180828_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Lenovo_Lenovo TB-7304I_17-11-2019_11-51-41.dump file
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-17-2019, 12:42   #5119 (permalink)
Freak Poster
 
SandyBridge's Avatar
 
Join Date: May 2015
Location: Algiers, Algeria
Posts: 343
Member: 2399672
Status: Offline
Thanks Meter: 187
Oppo F7 (CPH1819) - Factory reset & Frp

Code:
Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.8.2.0 Software version.

Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM111
Port name: MediaTek USB Port (COM111)
Detecting Chip Version...
HW Chip: MT6771: 0788.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Oppo_v.1, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC Flash: .90014A48.43473861.34A24811.B1051593
eMMC Flash: Hynix: HCG8a4
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Android version: 8.1.0
Factory Reset...
Formating User Data section
Factory Reset is successfully performed!
Backup saved as OPPO_F7 (CPH1819)_17-11-2019_12-38-27.dump file
Performed by 1.8.2.0 Software version.

Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM111
Port name: MediaTek USB Port (COM111)
Detecting Chip Version...
HW Chip: MT6771: 0788.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Oppo_v.1, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC Flash: .90014A48.43473861.34A24811.B1051593
eMMC Flash: Hynix: HCG8a4
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Android version: 8.1.0
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as OPPO_F7 (CPH1819)_17-11-2019_12-39-34.dump file
Performed by 1.8.2.0 Software version.
Test point

https://imgur.com/5kD7PU8
  Reply With Quote
The Following User Says Thank You to SandyBridge For This Useful Post:
Old 11-17-2019, 17:45   #5120 (permalink)
Product Supporter
 
Join Date: Aug 2007
Location: karachi
Posts: 5,303
Member: 572216
Status: Offline
Sonork: 100.1612300
Thanks Meter: 3,738
OALE XS2 FRP lock is successfully reseted

Code:
Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: OALE
Selected model: X3
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM29
Port name: MediaTek PreLoader USB VCOM (Android) (COM29)
Detecting Chip Version...
HW Chip: MT6761: 0717.0000
HW Version: 8A00.CA01.0200.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.28
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010051.5831334D.42071523.DAC383A1
eMMC Flash: Samsung: QX13MB
Internal RAM size: 256 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: OALE
Model: XS2_LTE
Device: XS2_LTE
Android version: 9.0
Display ID: D2_XS2_LTE_OALE_09_20190711
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as OALE_XS2_LTE_17-11-2019_21-39-29.dump file
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-18-2019, 07:39   #5121 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 4,133
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,992
Donate money to this user
T285 frp done

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-G850F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-18-2019, 07:49   #5122 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 4,133
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,992
Donate money to this user
J120F FRP Done

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J120F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-18-2019, 09:00   #5123 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 412
Member: 2924041
Status: Offline
Thanks Meter: 142
Platform: SYMPHONY
Selected model: V98
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM14
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Symphony
Model: V98
Device: V98
Android version: 8.1.0
Custom build version: V98_HW1_V9
Internal build version: K121AG_8.1_SYM_BD_GMS_20
Display ID: OPM2.171019.012 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Symphony_V98_18-11-2019_13-59-57.dump file
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-18-2019, 09:01   #5124 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 4,133
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,992
Donate money to this user
Redmi 5a Mi account DONE

Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: XIAOMI
Selected model: REDMI 5A
Please, select one of the options for "Reset Mi Account" operation or press Ok to continue...
Please power phone ON and enable "USB Debugging" then press "OK" button!

If operation wasn't completed, then Your device get re-locked and credits aren't refundable!
Searching for a phone (waiting for ADB / Fastboot device)...
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: Xiaomi Redmi 5A
SW version: N2G47H
Date: Fri Apr 6 00:29:08 CST 2018
Android version: 7.1.2
Baseband MPSS.JO.3.0-00369-8937_GENNS_PACK-2.136430.1.138513.1_V047
Disabling Mi Services...
Mi Account is successfully reseted!
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-18-2019, 14:08   #5125 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 706
Member: 746586
Status: Offline
Thanks Meter: 204
Donate money to this user
Welcome to Octoplus FRP Tool v.1.8.1.1
Platform: HUAWEI
Selected model: VNS-L31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VNS-L31
Phone SN: 4TE7N17715001200
Phone IMEI: 864002036784149
SW version: VNS-L31C16B136
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 11-19-2019, 10:38   #5126 (permalink)
Junior Member
 
Join Date: Feb 2018
Location: Pyatigorsk
Posts: 11
Member: 2812344
Status: Offline
Thanks Meter: 1
Platform: SAMSUNG
Selected model: SM-G570F
Searching for UART interface.. COM13
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM13
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 1.8.2.0 Software version.

After all these actions, the Device stopped turning on. It completely stopped responding to the power button.
  Reply With Quote
Old 11-19-2019, 11:32   #5127 (permalink)
Freak Poster
 
Join Date: Jul 2017
Location: Globe
Posts: 348
Member: 2742707
Status: Offline
Thanks Meter: 138
Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: HISENSE
Selected model: E6
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM12
Port name: MediaTek PreLoader USB VCOM (Android) (COM12)
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CB00.0002.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-01-06.10:09_393798, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
eMMC Flash: .15010046.4E36324D.42039022.A88C26AF
eMMC Flash: Samsung: FN62MB
Internal RAM size: 256 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Hisense
Model: Hisense Infinity E6
Device: HS6739MT
Android version: 8.1.0
Display ID: Hisense_F16_01_S03_20190716
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Hisense_Hisense Infinity E6_15-11-2019_17-03-27.dump file
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-20-2019, 10:06   #5128 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,174
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,685
Wink Mi A2 Lite FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: XIAOMI
Selected model: MI A2 LITE
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM131
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Mi A2 Lite
Device: daisy_sprout
Android version: 9
Display ID: PKQ1.180917.001.V10.0.14.0.PDLMIXM
Firmware version: V10.0.14.0.PDLMIXM
Factory Reset...
Formating User Data section
Factory Reset is successfully performed!
Rebooting phone
Backup saved as xiaomi_Mi A2 Lite_20-11-2019_09-50-41.dump file
Performed by 1.8.2.0 Software version.

Platform: XIAOMI
Selected model: MI A2 LITE
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM131
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Mi A2 Lite
Device: daisy_sprout
Android version: 9
Display ID: PKQ1.180917.001.V10.0.14.0.PDLMIXM
Firmware version: V10.0.14.0.PDLMIXM
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as xiaomi_Mi A2 Lite_20-11-2019_09-58-54.dump file
Performed by 1.8.2.0 Software version.
  Reply With Quote
Old 11-20-2019, 13:37   #5129 (permalink)
Freak Poster
 
Join Date: Nov 2007
Location: cape town
Posts: 138
Member: 624019
Status: Offline
Sonork: 1650290
Thanks Meter: 10
Donate money to this user
Huawei p10 FRP Done With test point
Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: HUAWEI
Selected model: VTR-L09
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM48
Checking resource files...
Searching for a phone. Please wait...
Found phone on COM48
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: VTR-L09
Phone SN: 0000000000000000
Phone IMEI: 860000000000000
Phone IMEI2: 86000000000000
SW version: VTR-L09 9.1.0.262(C02E9R1P9)
FRP lock is successfully reseted!
Performed by 1.8.2.0 Software version
  Reply With Quote
Old 11-20-2019, 13:37   #5130 (permalink)
Freak Poster
 
Join Date: Nov 2007
Location: cape town
Posts: 138
Member: 624019
Status: Offline
Sonork: 1650290
Thanks Meter: 10
Donate money to this user
Huawei p10 FRP Done With test point
Welcome to Octoplus FRP Tool v.1.8.2.0
Platform: HUAWEI
Selected model: VTR-L09
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM48
Checking resource files...
Searching for a phone. Please wait...
Found phone on COM48
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: VTR-L09
Phone SN: 0000000000000000
Phone IMEI: 860000000000000
Phone IMEI2: 86000000000000
SW version: VTR-L09 9.1.0.262(C02E9R1P9)
FRP lock is successfully reseted!
Performed by 1.8.2.0 Software version
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 15:16.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.31536 seconds with 9 queries

SEO by vBSEO