GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool
Reload this Page 🐙 Post here success Reset FRP story with Octoplus FRP Tool
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source Search Today's Posts Mark Forums Read

Reply
Page 43 of 554 « First 33404142 43 4445465393143543 Last »
 
LinkBack Thread Tools Display Modes
Old 05-10-2018, 08:00   #631 (permalink)
No Life Poster
 
gsmnitinmobile's Avatar
 
Join Date: Jun 2011
Location: sonu
Posts: 660
Member: 1595511
Status: Offline
Sonork: nnn
Thanks Meter: 121
Talking 🐙 Xiaomi Redmi 5A Mi Account successfully reseted

Platform: XIAOMI
Selected model: REDMI 4A
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 5A
Device: riva
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Resetting Mi Account...
Reading MI part...
Writing MI part...
Rebooting phone
Backup saved as XIAOMI_REDMI 4A_10-05-2018_12-22-04.dump file
Mi Account is successfully reseted!
Performed by 1.2.5.0 Software version.

Select redmi 4A MODEL
Redmi 5A MI Account successfully
Reste Mi Account tested successfully

MOB.9767228644



https://postimg.cc/image/cdxlerciv/
Last edited by Octopus box; 05-10-2018 at 09:07.
  Reply With Quote
The Following User Says Thank You to gsmnitinmobile For This Useful Post:
Old 05-10-2018, 12:56   #632 (permalink)
Freak Poster
 
Join Date: Mar 2010
Location: chittagong,bangladeh
Posts: 137
Member: 1260023
Status: Offline
Sonork: 100.1614097
Thanks Meter: 91
Samsung J7 Prime SM-G610F Reset FRP by UART UFS mode successfully done
Samsung J7 Prime SM-G610F Reset FRP by UART UFS mode successfully done:

Welcome to Octoplus FRP Tool v.1.2.5
Platform: SAMSUNG
Selected model: SM-G610F
Searching for UART interface.. COM12
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM12
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP lock is successfully reseted!
Performed by 1.2.5.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:53.
  Reply With Quote
The Following User Says Thank You to sajaldip For This Useful Post:
Old 05-10-2018, 13:54   #633 (permalink)
Insane Poster
 
Join Date: May 2016
Posts: 82
Member: 2573997
Status: Offline
Thanks Meter: 109
Thumbs up 🐙 Motorola XT1767 Reset FRP Successfully done
my first success report..

motorolla xt 1767 frp done...

2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
WARN : 5/10/2018 10:42:33 AM > Please, press "OK" button on the phone to allow USB debugging..
INFO : 5/10/2018 10:42:35 AM > Searching for a phone (waiting for ADB device)...
INFO : 5/10/2018 10:42:36 AM > Phone found.
INFO : 5/10/2018 10:42:36 AM > Reading info...
INFO : 5/10/2018 10:42:37 AM > Phone model: motorola Moto E (4)
INFO : 5/10/2018 10:42:37 AM > SW version: NDQS26.69-23-2-3
INFO : 5/10/2018 10:42:38 AM > Date: Fri Sep 22 00:54:33 CDT 2017
INFO : 5/10/2018 10:42:38 AM > Android version: 7.1.1
INFO : 5/10/2018 10:42:38 AM > Baseband M8917_16000.269.04.03.01R PERRY_NA_CUST
INFO : 5/10/2018 10:42:39 AM > Detected phone model: XT1767
INFO : 5/10/2018 10:42:39 AM > Resetting FRP lock..
WARN : 5/10/2018 10:42:48 AM > FRP lock is successfully reseted!
INFO : 5/10/2018 10:42:48 AM > Performed by 1.2.5.0 Software version.
Last edited by Octopus box; 05-10-2018 at 14:02.
  Reply With Quote
The Following 3 Users Say Thank You to Mudasir Ali For This Useful Post:
Show/Hide list of the thanked
Old 05-10-2018, 17:32   #634 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Huawei SLA-L22 Reset FRP successfully done
INFO : 2018-05-08 20:08:43 > Welcome to Octoplus FRP Tool v.1.2.2
INFO : 2018-05-08 20:18:45 > Platform: HUAWEI
INFO : 2018-05-08 20:18:45 > Selected model: SLA-L22
INFO : 2018-05-08 20:18:45 > Put the phone in FastBoot Mode:
INFO : 2018-05-08 20:18:45 > 1. Remove SD and SIM cards from the phone
INFO : 2018-05-08 20:18:45 > 2. Power phone OFF
INFO : 2018-05-08 20:18:45 > 3. Press and hold "Vol-" and insert USB cable
INFO : 2018-05-08 20:18:45 > 4. Wait until the phone enter in FastBoot Mode
INFO : 2018-05-08 20:18:45 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:18:45 > Detected phone model: VNS-L21
WARN : 2018-05-08 20:18:45 > Warning: Selected model (SLA-L22) differs from the detected one (VNS-L21)!
INFO : 2018-05-08 20:18:45 > If you want select (VNS-L21) as (SLA-L22) model, please check "manual select".
ERROR : 2018-05-08 20:18:45 > Operation was failed!
INFO : 2018-05-08 20:18:45 > Performed by 1.2.2.0 Software version.
INFO : 2018-05-08 20:18:45 >
INFO : 2018-05-08 20:19:07 > Platform: HUAWEI
INFO : 2018-05-08 20:19:07 > Selected model: VNS-L21
INFO : 2018-05-08 20:19:07 > Put the phone in FastBoot Mode:
INFO : 2018-05-08 20:19:07 > 1. Remove SD and SIM cards from the phone
INFO : 2018-05-08 20:19:07 > 2. Power phone OFF
INFO : 2018-05-08 20:19:07 > 3. Press and hold "Vol-" and insert USB cable
INFO : 2018-05-08 20:19:07 > 4. Wait until the phone enter in FastBoot Mode
INFO : 2018-05-08 20:19:07 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:19:07 > Detected phone model: VNS-L21
INFO : 2018-05-08 20:19:07 > Phone SN: BUC4C16425012513
INFO : 2018-05-08 20:19:07 > Phone IMEI: 869398020752059
INFO : 2018-05-08 20:19:07 > Phone IMEI: 869398020800056
INFO : 2018-05-08 20:19:07 > SW version: VNS-L21C432B104
INFO : 2018-05-08 20:19:07 > Connecting to server..
INFO : 2018-05-08 20:19:13 > OK
INFO : 2018-05-08 20:19:13 > Authorizing...
INFO : 2018-05-08 20:19:14 > OK
INFO : 2018-05-08 20:19:14 > Resetting FRP lock..
WARN : 2018-05-08 20:19:19 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 2018-05-08 20:19:19 > FRP lock is successfully reseted!
INFO : 2018-05-08 20:19:19 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:54.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 17:34   #635 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Another one Huawei SLA-L22 Reset FRP successfully done
INFO : 2018-05-08 20:20:00 > Platform: HUAWEI
INFO : 2018-05-08 20:20:00 > Selected model: SLA-L22
INFO : 2018-05-08 20:20:00 > Put the phone in FastBoot Mode:
INFO : 2018-05-08 20:20:00 > 1. Remove SD and SIM cards from the phone
INFO : 2018-05-08 20:20:00 > 2. Power phone OFF
INFO : 2018-05-08 20:20:00 > 3. Press and hold "Vol-" and insert USB cable
INFO : 2018-05-08 20:20:00 > 4. Wait until the phone enter in FastBoot Mode
INFO : 2018-05-08 20:20:00 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:20:00 > Detected phone model: SLA-L22
INFO : 2018-05-08 20:20:00 > Phone SN: AEUBB17807501086
INFO : 2018-05-08 20:20:00 > Phone IMEI: 865547031208097
INFO : 2018-05-08 20:20:00 > Connecting to server..
INFO : 2018-05-08 20:20:01 > OK
INFO : 2018-05-08 20:20:01 > Authorizing...
INFO : 2018-05-08 20:20:01 > OK
INFO : 2018-05-08 20:20:01 > Resetting FRP lock..
WARN : 2018-05-08 20:20:05 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 2018-05-08 20:20:05 > FRP lock is successfully reseted!
INFO : 2018-05-08 20:20:07 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:55.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 17:34   #636 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Samsung SM-J320F Reset FRP succes
INFO : 2018-05-08 20:22:06 > Platform: SAMSUNG
INFO : 2018-05-08 20:22:06 > Selected model: SM-J320F
WARN : 2018-05-08 20:22:11 > Reset FRP/ Reactivation lock operation for SM-J320F will delete all user data on the phone (contacts, pictures and others)!
WARN : 2018-05-08 20:22:11 >
WARN : 2018-05-08 20:22:11 > NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
WARN : 2018-05-08 20:22:11 > Connecting to server...
INFO : 2018-05-08 20:22:13 > Connecting to server...Ok!
INFO : 2018-05-08 20:22:13 > Checking resource files...
INFO : 2018-05-08 20:22:17 > Downloading resources...
INFO : 2018-05-08 20:23:47 > All necessary resource files have been downloaded successfully.
WARN : 2018-05-08 20:23:47 > Please put the phone into Download Mode and connect USB cable.
WARN : 2018-05-08 20:23:50 > To put SM-J320F into Download Mode, You have to perform the following steps:
WARN : 2018-05-08 20:23:50 > 1. Reconnect the battery.
WARN : 2018-05-08 20:23:50 > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 2018-05-08 20:23:50 > 3. When phone turns on, press "Volume+" key.
INFO : 2018-05-08 20:23:50 > Waiting for phone...
INFO : 2018-05-08 20:23:50 > Firmware write started.
INFO : 2018-05-08 20:23:50 > Writing Custom section...
INFO : 2018-05-08 20:23:54 > Custom section has been written successfully.
INFO : 2018-05-08 20:23:54 > Firmware writing successfully completed.
WARN : 2018-05-08 20:23:54 > FRP lock is successfully reseted!
BINF : 2018-05-08 20:23:54 > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 2018-05-08 20:23:54 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:55.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 17:35   #637 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Samsung SM-G935F Reset FRP successfully done
INFO : 2018-05-08 20:38:04 > Platform: SAMSUNG
INFO : 2018-05-08 20:38:04 > Selected model: SM-G935F
WARN : 2018-05-08 20:38:04 > To put SM-G935F into Download Mode, You have to perform the following steps:
WARN : 2018-05-08 20:38:04 > 1. Reconnect the battery.
WARN : 2018-05-08 20:38:04 > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 2018-05-08 20:38:04 > 3. When phone turns on, press "Volume+" key.
INFO : 2018-05-08 20:38:04 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:39:47 > Phone found.
INFO : 2018-05-08 20:39:47 > Initializing..
INFO : 2018-05-08 20:39:47 > PIT was read successfully.
INFO : 2018-05-08 20:39:47 > Searching for UART interface..
INFO : 2018-05-08 20:39:47 > UART interfaces not found!
ERROR : 2018-05-08 20:39:47 > Operation was failed!
INFO : 2018-05-08 20:39:47 > Performed by 1.2.2.0 Software version.
INFO : 2018-05-08 20:39:47 >
INFO : 2018-05-08 20:39:58 > Platform: SAMSUNG
INFO : 2018-05-08 20:39:58 > Selected model: SM-G935F
WARN : 2018-05-08 20:39:58 > To put SM-G935F into Download Mode, You have to perform the following steps:
WARN : 2018-05-08 20:39:58 > 1. Reconnect the battery.
WARN : 2018-05-08 20:39:58 > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 2018-05-08 20:39:58 > 3. When phone turns on, press "Volume+" key.
INFO : 2018-05-08 20:39:58 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:41:07 > Phone found.
INFO : 2018-05-08 20:41:07 > Initializing..
INFO : 2018-05-08 20:41:07 > PIT was read successfully.
INFO : 2018-05-08 20:41:07 > Searching for UART interface..
INFO : 2018-05-08 20:41:07 > COM3
WARN : 2018-05-08 20:41:07 > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2018-05-08 20:41:07 > Searching for device. Please wait...
INFO : 2018-05-08 20:41:31 > Resetting FRP lock..
WARN : 2018-05-08 20:41:32 > FRP lock is successfully reseted!
BINF : 2018-05-08 20:41:32 > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 2018-05-08 20:41:32 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:56.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 17:35   #638 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Samsung SM-G935F Reset FRP done
INFO : 2018-05-08 20:43:49 > Platform: SAMSUNG
INFO : 2018-05-08 20:43:49 > Selected model: SM-G935F
WARN : 2018-05-08 20:43:49 > To put SM-G935F into Download Mode, You have to perform the following steps:
WARN : 2018-05-08 20:43:49 > 1. Reconnect the battery.
WARN : 2018-05-08 20:43:49 > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 2018-05-08 20:43:49 > 3. When phone turns on, press "Volume+" key.
INFO : 2018-05-08 20:43:49 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:43:54 > Phone found.
INFO : 2018-05-08 20:43:54 > Initializing..
INFO : 2018-05-08 20:43:54 > PIT was read successfully.
INFO : 2018-05-08 20:43:54 > Searching for UART interface..
INFO : 2018-05-08 20:43:54 > COM3
WARN : 2018-05-08 20:43:54 > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2018-05-08 20:43:54 > Searching for device. Please wait...
INFO : 2018-05-08 20:44:09 > Resetting FRP lock..
WARN : 2018-05-08 20:44:10 > FRP lock is successfully reseted!
BINF : 2018-05-08 20:44:10 > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 2018-05-08 20:44:16 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 05:06.
  Reply With Quote
Old 05-10-2018, 17:36   #639 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Samsung SM-G531F Reset FRP done
INFO : 2018-05-08 20:47:43 > Platform: SAMSUNG
INFO : 2018-05-08 20:47:43 > Selected model: SM-G531F
WARN : 2018-05-08 20:47:43 > To put SM-G531F into Download Mode, You have to perform the following steps:
WARN : 2018-05-08 20:47:43 > 1. Reconnect the battery.
WARN : 2018-05-08 20:47:43 > 2. Press and hold "Volume-" +"Power"+''Home" keys.
INFO : 2018-05-08 20:47:43 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:47:50 > Phone found.
INFO : 2018-05-08 20:47:50 > Initializing..
INFO : 2018-05-08 20:47:50 > Resetting FRP lock..
SUCC : 2018-05-08 20:47:50 > success
INFO : 2018-05-08 20:47:50 > Resetting EE lock..
SUCC : 2018-05-08 20:47:50 > success
INFO : 2018-05-08 20:47:50 > Resetting Samsung Account lock..
ERROR : 2018-05-08 20:47:50 > not supported
WARN : 2018-05-08 20:47:50 > FRP lock is successfully reseted!
INFO : 2018-05-08 20:47:50 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:56.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 17:36   #640 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Huawei CAM-L21 Reset FRP done
INFO : 2018-05-08 20:55:09 > Platform: HUAWEI
INFO : 2018-05-08 20:55:09 > Selected model: CAM-L21
INFO : 2018-05-08 20:55:09 > Put the phone in FastBoot Mode:
INFO : 2018-05-08 20:55:09 > 1. Remove SD and SIM cards from the phone
INFO : 2018-05-08 20:55:09 > 2. Power phone OFF
INFO : 2018-05-08 20:55:09 > 3. Press and hold "Vol-" and insert USB cable
INFO : 2018-05-08 20:55:09 > 4. Wait until the phone enter in FastBoot Mode
INFO : 2018-05-08 20:55:09 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:55:22 > Detected phone model: CAM-L21
INFO : 2018-05-08 20:55:22 > Phone SN: LHTDU17221007984
INFO : 2018-05-08 20:55:22 > Phone IMEI: 864591032946587
INFO : 2018-05-08 20:55:22 > SW version: CAM-L21C432B191
INFO : 2018-05-08 20:55:22 > Connecting to server..
INFO : 2018-05-08 20:55:23 > OK
INFO : 2018-05-08 20:55:24 > Authorizing...
INFO : 2018-05-08 20:55:24 > OK
INFO : 2018-05-08 20:55:24 > Resetting FRP lock..
WARN : 2018-05-08 20:55:28 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 2018-05-08 20:55:28 > FRP lock is successfully reseted!
INFO : 2018-05-08 20:55:28 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:56.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 18:30   #641 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Huawei CUN-L21 Reset FRP done successfully
INFO : 2018-05-08 20:57:36 > Platform: HUAWEI
INFO : 2018-05-08 20:57:36 > Selected model: CUN-L21
WARN : 2018-05-08 20:57:36 > Please, power phone OFF and connect USB cable.
INFO : 2018-05-08 20:57:36 > Searching for a phone. Please wait...
INFO : 2018-05-08 20:57:43 > Found phone on COM20
INFO : 2018-05-08 20:57:44 > Detecting Chip Version...
INFO : 2018-05-08 20:57:44 > HW Chip: MT6737T: 0321.0000
INFO : 2018-05-08 20:57:44 > HW Version: 8A00.CB00.0000.0000
INFO : 2018-05-08 20:57:44 > Connecting...
INFO : 2018-05-08 20:57:44 > Brom Version: FF
INFO : 2018-05-08 20:57:44 > BootLoader Version: 01
INFO : 2018-05-08 20:57:44 > Searching Download Agent...
INFO : 2018-05-08 20:57:44 > Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.5
INFO : 2018-05-08 20:57:44 > Sending Download Agent...
INFO : 2018-05-08 20:57:44 > DA sent successfully
INFO : 2018-05-08 20:57:44 > Initializing DA...
INFO : 2018-05-08 20:57:44 > Synchronizing with DA...
INFO : 2018-05-08 20:57:44 > NAND Flash: not installed
INFO : 2018-05-08 20:57:44 > eMMC Flash: .15010046.4E58324D.42062138.B8AD2B09
INFO : 2018-05-08 20:57:44 > eMMC Flash: Samsung: FNX2MB
INFO : 2018-05-08 20:57:44 > DA ver: 4.2.93
INFO : 2018-05-08 20:57:44 > Initializing Memory Flash..
INFO : 2018-05-08 20:57:46 > Initialization successfully completed
INFO : 2018-05-08 20:57:47 > Sending loaders...
INFO : 2018-05-08 20:57:47 > Loader send successfuly.
INFO : 2018-05-08 20:57:47 > Reading Flash Info...
INFO : 2018-05-08 20:57:48 > EMMC rpmb size: 0 Mb
INFO : 2018-05-08 20:57:48 > EMMC boot1 size: 4 Mb
INFO : 2018-05-08 20:57:48 > EMMC boot2 size: 4 Mb
INFO : 2018-05-08 20:57:48 > EMMC gp1 size: 0 Mb
INFO : 2018-05-08 20:57:48 > EMMC gp2 size: 0 Mb
INFO : 2018-05-08 20:57:48 > EMMC gp3 size: 0 Mb
INFO : 2018-05-08 20:57:48 > EMMC gp4 size: 0 Mb
INFO : 2018-05-08 20:57:48 > EMMC user area size: 7456 Mb
INFO : 2018-05-08 20:57:48 > Internal RAM size: 128 Kb
INFO : 2018-05-08 20:57:48 > External RAM size: 1024 Mb
INFO : 2018-05-08 20:57:48 > Reading partition...
INFO : 2018-05-08 20:57:48 > Reading info...
INFO : 2018-05-08 20:57:49 > Brand: HUAWEI
INFO : 2018-05-08 20:57:49 > Model: HUAWEI CUN-L21
INFO : 2018-05-08 20:57:49 > Device: HWCUN-L6735
INFO : 2018-05-08 20:57:49 > Platform: mt6735
INFO : 2018-05-08 20:57:49 > Android version: 5.1
INFO : 2018-05-08 20:57:49 > Display ID: CUN-L21C577B118
INFO : 2018-05-08 20:57:49 > Searching for signatures...
INFO : 2018-05-08 20:57:49 > Resetting FRP lock..
WARN : 2018-05-08 20:57:49 > FRP lock is successfully reseted!
INFO : 2018-05-08 20:57:49 > Backup saved as HUAWEI_CUN-L21_08-05-2018_20-57-48.dump file
INFO : 2018-05-08 20:57:49 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:57.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 18:30   #642 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Huawei STF-L09 Reset FRP successfully done
INFO : 2018-05-08 21:11:26 > Platform: HUAWEI
INFO : 2018-05-08 21:11:26 > Selected model: STF-L09
INFO : 2018-05-08 21:11:26 > Put the phone in FastBoot Mode:
INFO : 2018-05-08 21:11:26 > 1. Remove SD and SIM cards from the phone
INFO : 2018-05-08 21:11:26 > 2. Power phone OFF
INFO : 2018-05-08 21:11:26 > 3. Press and hold "Vol-" and insert USB cable
INFO : 2018-05-08 21:11:26 > 4. Wait until the phone enter in FastBoot Mode
INFO : 2018-05-08 21:11:26 > Searching for a phone. Please wait...
INFO : 2018-05-08 21:11:37 > Detected phone model: STF-L09
INFO : 2018-05-08 21:11:37 > Phone SN: 7BKDU17610013477
INFO : 2018-05-08 21:11:37 > Phone IMEI: 864597030066146
INFO : 2018-05-08 21:11:38 > Phone IMEI2: 864597030083158
INFO : 2018-05-08 21:11:38 > SW version: STF-L09C432B180
INFO : 2018-05-08 21:11:38 > Connecting to server..
INFO : 2018-05-08 21:11:39 > OK
INFO : 2018-05-08 21:11:39 > Authorizing...
INFO : 2018-05-08 21:11:39 > OK
INFO : 2018-05-08 21:11:39 > Resetting FRP lock..
WARN : 2018-05-08 21:11:47 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 2018-05-08 21:11:47 > FRP lock is successfully reseted!
INFO : 2018-05-08 21:11:47 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:57.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 18:31   #643 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Samsung SM-A510F FRP removed
INFO : 2018-05-08 21:51:28 > Platform: SAMSUNG
INFO : 2018-05-08 21:51:28 > Selected model: SM-A510F
INFO : 2018-05-08 21:51:28 > Searching for UART interface..
INFO : 2018-05-08 21:51:28 > COM3
WARN : 2018-05-08 21:51:28 > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2018-05-08 21:51:28 > Searching for device. Please wait...
INFO : 2018-05-08 21:51:40 > Phone found.
INFO : 2018-05-08 21:51:40 > Rebooting phone in Upload Mode...
INFO : 2018-05-08 21:51:40 > OK
WARN : 2018-05-08 21:51:48 > Please connect phone to USB cable..
INFO : 2018-05-08 21:51:48 > Searching for a phone. Please wait...
INFO : 2018-05-08 21:51:55 > OK
INFO : 2018-05-08 21:51:55 > Reading data...
INFO : 2018-05-08 21:52:01 > Checking operation...
INFO : 2018-05-08 21:52:01 > OK
INFO : 2018-05-08 21:52:01 > Searching for UART interface..
INFO : 2018-05-08 21:52:01 > COM3
WARN : 2018-05-08 21:52:01 > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2018-05-08 21:52:01 > Searching for device. Please wait...
INFO : 2018-05-08 21:52:24 > Phone found.
INFO : 2018-05-08 21:52:28 > Searching for UART interface..
INFO : 2018-05-08 21:52:28 > COM3
WARN : 2018-05-08 21:52:28 > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2018-05-08 21:52:28 > Searching for device. Please wait...
INFO : 2018-05-08 21:53:00 > Phone found.
INFO : 2018-05-08 21:53:00 > Resetting FRP lock..
SUCC : 2018-05-08 21:53:14 > success
WARN : 2018-05-08 21:53:14 > FRP lock is successfully reseted!
INFO : 2018-05-08 21:53:17 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:58.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 18:31   #644 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Samsung SM-G925F Reset FRP done
INFO : 2018-05-08 22:51:07 > Platform: SAMSUNG
INFO : 2018-05-08 22:51:07 > Selected model: SM-G925F
WARN : 2018-05-08 22:51:07 > To put SM-G925F into Download Mode, You have to perform the following steps:
WARN : 2018-05-08 22:51:07 > 1. Reconnect the battery.
WARN : 2018-05-08 22:51:07 > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 2018-05-08 22:51:07 > 3. When phone turns on, press "Volume+" key.
INFO : 2018-05-08 22:51:07 > Searching for a phone. Please wait...
INFO : 2018-05-08 22:51:17 > Phone found.
INFO : 2018-05-08 22:51:17 > Initializing..
INFO : 2018-05-08 22:51:17 > PIT was read successfully.
INFO : 2018-05-08 22:51:17 > Searching for UART interface..
INFO : 2018-05-08 22:51:17 > COM3
WARN : 2018-05-08 22:51:17 > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2018-05-08 22:51:17 > Searching for device. Please wait...
INFO : 2018-05-08 22:51:36 > Resetting FRP lock..
WARN : 2018-05-08 22:51:36 > FRP lock is successfully reseted!
BINF : 2018-05-08 22:51:36 > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 2018-05-08 22:51:37 > Performed by 1.2.2.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:58.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Old 05-10-2018, 18:35   #645 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Poland
Posts: 244
Member: 2675528
Status: Offline
Thanks Meter: 81
Huawei WAS-LX1 Reset FRP done
INFO : 2018-05-10 08:01:37 > Welcome to Octoplus FRP Tool v.1.2.5
INFO : 2018-05-10 08:22:10 > Platform: HUAWEI
INFO : 2018-05-10 08:22:10 > Selected model: WAS-LX1
INFO : 2018-05-10 08:22:10 > Put the phone in FastBoot Mode:
INFO : 2018-05-10 08:22:10 > 1. Remove SD and SIM cards from the phone
INFO : 2018-05-10 08:22:10 > 2. Power phone OFF
INFO : 2018-05-10 08:22:10 > 3. Press and hold "Vol-" and insert USB cable
INFO : 2018-05-10 08:22:10 > 4. Wait until the phone enter in FastBoot Mode
INFO : 2018-05-10 08:22:10 > Searching for a phone. Please wait...
INFO : 2018-05-10 08:22:22 > Detected phone model: WAS-LX1
INFO : 2018-05-10 08:22:22 > Phone SN: PMF4C17A23000847
INFO : 2018-05-10 08:22:22 > Phone IMEI: 867440030916688
INFO : 2018-05-10 08:22:22 > Phone IMEI2: 867440030940696
INFO : 2018-05-10 08:22:22 > SW version: WAS-LX1C432B198
INFO : 2018-05-10 08:22:22 > Connecting to server..
INFO : 2018-05-10 08:22:22 > OK
INFO : 2018-05-10 08:22:22 > Authorizing...
INFO : 2018-05-10 08:22:23 > OK
INFO : 2018-05-10 08:22:23 > Resetting FRP lock..
WARN : 2018-05-10 08:22:25 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 2018-05-10 08:22:25 > FRP lock is successfully reseted!
INFO : 2018-05-10 08:22:25 > Performed by 1.2.5.0 Software version.
Last edited by Octopus box; 05-11-2018 at 04:59.
  Reply With Quote
The Following User Says Thank You to KubaIV For This Useful Post:
Reply
Page 43 of 554 « First 33404142 43 4445465393143543 Last »

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 10:11.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.34504 seconds with 9 queries

SEO by vBSEO