GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 02-23-2021, 06:29   #6436 (permalink)
Freak Poster
 
Join Date: Oct 2010
Posts: 339
Member: 1420095
Status: Offline
Thanks Meter: 205
Motorola Z3 FRP Success!


Work ID: 0000000000A0052C
Platform: MOTOROLA
Selected model: XT1929-17
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8998.gen:
Firmware released date: Jun 12 2018
Firmware released time: 14:47:15
Firmware compiled date: Jun 07 2018
Firmware compiled time: 11:00:00
SW version: MPSS.AT.2.5.c1.3-00037-8998_GEN_PACK-1
Enabling "USB Debugging" mode...
Searching for a phone (waiting for ADB / Fastboot device)...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: motorola moto z3
SW version: ODXS28.66-18-4
Date: Fri Oct 19 01:53:54 CDT 2018
Android version: 8.1.0
Baseband M8998_35.37.02.72R MNS
Detected phone model: XT1929-17
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.9.9.2 Software version.
  Reply With Quote
The Following User Says Thank You to himig_natin For This Useful Post:
Old 02-24-2021, 19:55   #6437 (permalink)
No Life Poster
 
maxmobilephone's Avatar
 
Join Date: Jun 2013
Location: BANGLADESH+UAE
Age: 31
Posts: 769
Member: 1969978
Status: Offline
Sonork: 100.1613242
Thanks Meter: 669
Donate money to this user
Reading info...
Please, press "OK" button on the phone to allow USB debugging..
Proper android device not found. Make sure that "USB debug" option on the device is turned on.
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-G532F
Firmware compiled date: Thu Jul 12 19:36:27 KST 2018
PDA version: G532FXWU1ARG4
CSC version: G532FOJV1ARG3
SW version: G532FXXU1ARF3
Phone SN: RZ8KA2BMHBJ
Android version: 6.0.1 (MMB29T)
Sales code: XSG
Country: UAE
HW platform: mt6737t
HW Chip: MT6737T
HW Modem: MT6737T
Security patch level: 2018-07-01
Codename: grandpplteser
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.9.9.2 Software version.
  Reply With Quote
The Following User Says Thank You to maxmobilephone For This Useful Post:
Old 02-25-2021, 06:09   #6438 (permalink)
Freak Poster
 
Join Date: Oct 2010
Posts: 339
Member: 1420095
Status: Offline
Thanks Meter: 205
Nokia 2.1 (TA-1093) FRP Success!

Welcome to Octoplus FRP Tool v.1.9.9.2

Work ID: 0000000000A30C7C
Platform: NOKIA
Selected model: TA-1093
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM18
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Android version: 10
Display ID: 00WW_4_11F
Firmware version: 00WW_4_11F
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.9.2 Software version.
  Reply With Quote
The Following User Says Thank You to himig_natin For This Useful Post:
Old 02-25-2021, 06:39   #6439 (permalink)
No Life Poster
 
Join Date: Aug 2014
Posts: 651
Member: 2233266
Status: Offline
Thanks Meter: 244
Welcome to Octoplus FRP Tool v.1.9.9.0
Card S/N: 01009072
Work ID: 0000000000A306F6
Platform: HUAWEI
Selected model: LUA-U22
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Port name: MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Target Config: 0000
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.2
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E31324D.4206847C.A098637B
eMMC Flash: Samsung: FN12MB
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Manufacturer: HUAWEI
Model: HUAWEI LUA-U22
Device: HWLUA-U6582
Platform: mt6582
Android version: 5.1
Display ID: LUA-U22C567B014
Searching for signatures...
Resetting FRP lock..
Backup saved as HUAWEI_HUAWEI LUA-U22_25-02-2021_10-00-05.dump file
FRP lock is successfully reseted!
Performed by 1.9.9.0 Software version.
  Reply With Quote
Old 02-26-2021, 11:24   #6440 (permalink)
No Life Poster
 
galijus's Avatar
 
Join Date: Oct 2009
Age: 41
Posts: 951
Member: 1131244
Status: Offline
Sonork: 100.1596724
Thanks Meter: 366
Coolpad E570 factory reset method 2 success

Code:
Work ID: 0000000000A4C636
Platform: COOLPAD
Selected model: E570
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM14
Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM14)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Target Config: 0000
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.050757A2.6D66597B
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Coolpad
Manufacturer: Coolpad
Model: Coolpad E570
Device: CP8722_U00
Platform: mt6735m
Android version: 5.1
Display ID: 5.1.039.P0.160906.8722_U00
Factory Reset...
Starting switching to high-speed mode...
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM39
Switching to high-speed success!
Writing userdata...
Writing cache...
Factory Reset is successfully performed!
Performed by 1.9.9.2 Software version.
  Reply With Quote
Old 02-27-2021, 12:59   #6441 (permalink)
Freak Poster
 
Join Date: Mar 2006
Location: Pakistan
Age: 41
Posts: 413
Member: 240756
Status: Offline
Thanks Meter: 68
LENOVO TB-X304F FRP Done Successfully

Work ID: 0000000000A643B7
Platform: LENOVO
Selected model: TB-X304F
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM9
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000550E100000000
QC CPU: Snapdragon 425 APQ8017
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo TB-X304F
Device: X304F
Platform: msm8937
Android version: 7.1.1
Display ID: TB-X304F_S000053_180927_ROW
Firmware version: TB-X304F_S000053_180927_ROW
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.9.2 Software version.
  Reply With Quote
Old 02-27-2021, 13:20   #6442 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 41
Posts: 2,568
Member: 75408
Status: Offline
Thanks Meter: 1,006
Xiaomi Redmi 7A Unbrick by writing firmware without authentication successfully done:
Code:
Work ID: 0000000000A647C6
Platform: XIAOMI
Selected model: REDMI 7A
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! DonвЂt turn off phone and donвЂt disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Put the phone into EDL mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Found phone on COM60
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000BF0E100720000
QC CPU: Snapdragon 439 SDM439
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Start Authentication...
Authentication done!
Checking request..
Reading partition...
Reading info...
Android version: 10
Firmware version: V11.0.5.0.QCMMIXM
Writing firmware...
Selected firmware files: 
C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\rawprogram0.xml
C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\patch0.xml
Opening "C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\rawprogram0.xml"...
Writing sec...
Writing vbmeta...
Writing vbmetabak...
Writing devcfg...
Writing devcfgbak...
Writing apdp...
Writing msadp...
Writing sbl1...
Writing sbl1bak...
Writing rpm...
Writing rpmbak...
Writing cmnlib...
Writing cmnlibbak...
Writing cmnlib64...
Writing cmnlib64bak...
Writing keymaster...
Writing keymasterbak...
Writing misc...
Writing aboot...
Writing abootbak...
Writing tz...
Writing tzbak...
Writing dtbo...
Writing dtbobak...
Writing splash...
Writing dsp...
Writing dspbak...
Writing mdtp...
Writing mdtpbak...
Writing boot...
Writing recovery...
Writing cache...
Writing modem...
Writing system...
Writing vendor...
Writing cust...
Writing userdata...
Writing PrimaryGPT...
Writing BackupGPT...
Opening "C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\patch0.xml"...
Writing Patch...
Firmware Write successfully.
Performed by 1.9.9.2 Software version.
  Reply With Quote
Old 02-27-2021, 13:43   #6443 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 41
Posts: 2,568
Member: 75408
Status: Offline
Thanks Meter: 1,006
Xiaomi Redmi 7A (pine, m1903c3eg) Reset FRP done without authentication:
Code:
Welcome to Octoplus FRP Tool v.1.9.9.2
Card S/N: 02028E78
Work ID: 0000000000A65433
Platform: XIAOMI
Selected model: REDMI 7A
Put the phone into EDL mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Found phone on COM60
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000BF0E100720000
QC CPU: Snapdragon 439 SDM439
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Start Authentication...
Authentication done!
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 7A
Device: pine
Android version: 9
Display ID: ZQL1533-pine-build-20190805184733
Firmware version: V10.2.5.0.PCMMIXM
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.9.2 Software version.
  Reply With Quote
The Following User Says Thank You to Dr_Wolodya For This Useful Post:
Old 03-01-2021, 19:35   #6444 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 41
Posts: 2,568
Member: 75408
Status: Offline
Thanks Meter: 1,006
OnePlus 3T (A3010) Reset FRP done:
Code:
Welcome to Octoplus FRP Tool v.1.9.9.2
Card S/N: 02028E78
Work ID: 0000000000A956D8
Platform: ONEPLUS
Selected model: A3010
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM24
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0005F0E12A703DB9
QC CPU: Snapdragon 821 MSM8996AC Pro
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 6D67B18C
Checking request..
Checking request..
Reading partition...
Reading info...
Brand: OnePlus
Platform: msm8996
Android version: 6.0.1
Firmware version: 63
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.9.2 Software version.
  Reply With Quote
Old 03-04-2021, 09:28   #6445 (permalink)
Insane Poster
 
Join Date: May 2003
Posts: 73
Member: 29442
Status: Offline
Thanks Meter: 11
Kruger&Matz Eagle805 KM0805.1
Hold Volume +
Work ID: 0000000000AD2547
Platform: KRUGER & MATZ
Selected model: EAGLE 961
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM10
Port name: SAMSUNG Mobile USB Modem #577
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Target Config: 0000
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010038.57504433.52003FD3.EA89A2AB
eMMC Flash: Samsung: 8WPD3R
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Kruger_Matz
Manufacturer: Kruger&Matz
Model: KM0805_1
Device: EAGLE_KM0805_1
Platform: mt6737m
  Reply With Quote
Old 03-07-2021, 08:40   #6446 (permalink)
Junior Member
 
Join Date: Feb 2017
Location: Uzbekiston
Posts: 28
Member: 2684254
Status: Offline
Sonork: 1-212-228-9600
Thanks Meter: 1
INOI 2 Lite 2019 FRP Success!

Quote:
Welcome to Octoplus FRP Tool v.1.9.9.2
Card S/N:
Work ID: 0000000000B16B4E
Platform: INOI
Selected model: 2 LITE 2019
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM20
Port name: MediaTek PreLoader USB VCOM (Android) (COM20)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 0000
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00_SP, n.14
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.3732324D.4200476A.CEDB4303
eMMC Flash: Samsung: F722MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: INOI
Manufacturer: INOI
Model: INOI 2 Lite 2019
Device: INOI_2_Lite_2019
Android version: 8.1.0
Display ID: INOI_2_Lite_2019_V1.4_20190729
Searching for signatures...
Resetting FRP lock..
Backup saved as INOI_INOI 2 Lite 2019_07-03-2021_12-34-28.dump file
FRP lock is successfully reseted!
Performed by 1.9.9.2 Software version.
  Reply With Quote
Old 03-09-2021, 13:00   #6447 (permalink)
Crazy Poster
 
Join Date: Jan 2018
Posts: 55
Member: 2803352
Status: Offline
Thanks Meter: 22
OPPO A57 (CPH1701) User Lock Remove Without Data Loss

Platform: OPPO
Selected model: A57 (CPH1701)
Selected port: COM12
Selected port: Qualcomm HS-USB QDLoader 9008 (COM12)
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0006B0E100000000
QC CPU: Snapdragon 435 MSM8940
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: OPPO
Model: CPH1701
Device: CPH1701
Platform: msm8937
Android version: 6.0.1
Display ID: CPH1701EX_11_A.34_180806
Firmware version: eng.root.20180806.181819
Disabling screen lock...
Getting start parameters
Searching files...
Writing patch...
Disable screen lock is succesfully performed!
Performed by 1.9.9.2 Software version.
  Reply With Quote
Old 03-10-2021, 18:12   #6448 (permalink)
Freak Poster
 
Join Date: Jun 2015
Location: Mashhad-Iran
Posts: 134
Member: 2403164
Status: Offline
Thanks Meter: 18
Welcome to Octoplus FRP Tool v.1.9.6.0
Card S/N: 00005679
Work ID: 11959169
Platform: __GENERAL RESET FRP METHODS
Selected model: SC9863A SIGN V4
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM22
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.9.6.0 Software version.
  Reply With Quote
Old 03-12-2021, 11:45   #6449 (permalink)
Junior Member
 
Join Date: Sep 2020
Location: turkey
Age: 36
Posts: 22
Member: 2968254
Status: Offline
Sonork: firat ayrılmazkardes
Thanks Meter: 0
Alcatelr pop 4s ( ot-5095k )

Platform: ALCATEL
Selected model: OT-5095K
Put the phone into Recovery mode:
1. Power phone OFF;
2. Press and hold "Vol+" + "Power" buttons;
3. Select "Enable ADB" option;
4. Select "Reboot System now" option;
5. Wait until the phone Power ON;
6. Connect USB cable.
Performed by 1.9.9.2 Software version.



NOT SEE THE PHONE

NOT MADE A FRP
  Reply With Quote
Old 03-12-2021, 17:11   #6450 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 41
Posts: 2,568
Member: 75408
Status: Offline
Thanks Meter: 1,006
Coolpad CP3632a Reset FRP done:
Code:
Welcome to Octoplus FRP Tool v.1.9.9.2
Card S/N: 02028E78
Work ID: 0000000000B95161
Platform: COOLPAD
Selected model: CP3632A
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM24
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100480000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Coolpad
Model: Coolpad 3632A
Device: cp3632a
Platform: msm8937
Android version: 7.1.1
Display ID: 7.1.108.56.P2.170511.NMF26F.MPCS
Firmware version: 108560743
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.9.2 Software version.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 20:43.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.37389 seconds with 9 queries

SEO by vBSEO