GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 04-11-2022, 04:19   #7006 (permalink)
No Life Poster
 
anrmobile's Avatar
 
Join Date: Oct 2011
Location: online
Posts: 851
Member: 1680232
Status: Offline
Sonork: 100.1611221
Thanks Meter: 212

Connecting to server...
Username: cakeybar23
Authorizing...
Checking balance...
Your balance: 260 credits.
Performed by 2.1.2.0 Software version.

Selected BOOT file: C:\Users\Owner\Downloads\N950USQU8DUE1_United_Stat es_Android_9\BL_N950USQU8DUE1_CL21356469_QB4029009 4_REV00_user_low_ship_MULTI_CERT.tar.md5
Selected AP file: C:\Users\Owner\Downloads\N950USQU8DUE1_United_Stat es_Android_9\AP_N950USQU8DUE1_CL21356469_QB4029009 4_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
Selected CP file: C:\Users\Owner\Downloads\N950USQU8DUE1_United_Stat es_Android_9\CP_N950USQU8DUE1_CP19224096_CL2135646 9_QB40290094_REV00_user_low_ship_MULTI_CERT.tar.md 5
Selected CSC file: C:\Users\Owner\Downloads\N950USQU8DUE1_United_Stat es_Android_9\CSC_OYN_N950UOYN8DUE1_CL21356469_QB40 290094_REV00_user_low_ship_MULTI_CERT.tar.md5
Work ID: 00000000019BC56A
Platform: SAMSUNG
Selected model: SM-N950U
Please put the phone into Download Mode and connect USB cable.
To put SM-N950U into Download Mode, You have to perform the following steps:
1. Power off the phone.
2. Press and hold "Volume-" + "Bixby" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABL section...
ABL section has been written successfully.
Writing BKSECAPP section...
BKSECAPP section has been written successfully.
Writing XBL section...
XBL section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing HYP section...
HYP section has been written successfully.
Writing DEVCFG section...
DEVCFG section has been written successfully.
Writing PMIC section...
PMIC section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing CMNLIB section...
CMNLIB section has been written successfully.
Writing CMNLIB64 section...
CMNLIB64 section has been written successfully.
Writing KEYMASTER section...
KEYMASTER section has been written successfully.
Writing APDP section...
APDP section has been written successfully.
Writing MSADP section...
MSADP section has been written successfully.
Writing SEC section...
SEC section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing STORSEC section...
STORSEC section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing DQMDBG section...
DQMDBG section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing DSP section...
DSP section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing OMR section...
OMR section has been written successfully.
Firmware writing successfully completed.
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to anrmobile For This Useful Post:
Old 04-11-2022, 09:03   #7007 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 670
Member: 746586
Status: Offline
Thanks Meter: 185
Work ID: 00000000019BF153
Platform: NOKIA
Selected model: TA-1365
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM11
Port name: Qualcomm HS-USB QDLoader 9008 (COM11)
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E7
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59000 Mb
eMMC Flash: .88010353.4C443634.47604604.00B158E7
eMMC Flash: Foresee: SLD64G
Internal RAM size: 232 Kb
External RAM size: 4096 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Nokia
Manufacturer: HMD Global
Model: Nokia G20
Device: RNN_sprout
Android version: 11
Display ID: 00WW_1_180_SP02
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as Nokia_Nokia G20_11-04-2022_09-58-09.dump file
FRP lock is successfully reseted!
Performed by 2.1.1.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to apacheadmiral For This Useful Post:
Old 04-12-2022, 06:06   #7008 (permalink)
Freak Poster
 
Join Date: Dec 2012
Posts: 168
Member: 1848453
Status: Offline
Thanks Meter: 48
Model: TM-MID790Q frp remove succeed

INFO : 4/11/2022 2:31:23 PM > Work ID: 00000000019C03C9
INFO : 4/11/2022 2:31:23 PM > Platform: __GENERAL RESET FRP METHODS
INFO : 4/11/2022 2:31:23 PM > Selected model: MTK GENERAL
WARN : 4/11/2022 2:31:23 PM > Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
INFO : 4/11/2022 2:31:23 PM > Searching for a phone. Please wait...
INFO : 4/11/2022 2:31:36 PM > Found phone on COM3
INFO : 4/11/2022 2:31:37 PM > Port name: MediaTek PreLoader USB VCOM (Android) (COM3)
INFO : 4/11/2022 2:31:37 PM > Detecting Chip Version...
INFO : 4/11/2022 2:31:37 PM > HW Chip: MT6580: 6580.0000
INFO : 4/11/2022 2:31:37 PM > HW Version: 8A00.CA00.0000.0000
INFO : 4/11/2022 2:31:37 PM > Connecting...
INFO : 4/11/2022 2:31:37 PM > Target Config: 0000
WARN : 4/11/2022 2:31:37 PM > Brom Version: FF
INFO : 4/11/2022 2:31:37 PM > BootLoader Version: 01
INFO : 4/11/2022 2:31:37 PM > Searching Download Agent...
INFO : 4/11/2022 2:31:46 PM > Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
INFO : 4/11/2022 2:31:46 PM > Sending Download Agent...
INFO : 4/11/2022 2:31:46 PM > DA sent successfully
INFO : 4/11/2022 2:31:46 PM > Initializing DA...
INFO : 4/11/2022 2:31:46 PM > Synchronizing with DA...
INFO : 4/11/2022 2:31:46 PM > NAND Flash: not installed
INFO : 4/11/2022 2:31:46 PM > eMMC Flash: .45010044.46343031.36019692.C0923447
INFO : 4/11/2022 2:31:46 PM > eMMC Flash: Sandisk: DF4016
INFO : 4/11/2022 2:31:46 PM > DA ver: 4.2.9C
INFO : 4/11/2022 2:31:46 PM > Initializing Memory Flash..
INFO : 4/11/2022 2:31:48 PM > Initialization successfully completed
INFO : 4/11/2022 2:31:48 PM > Sending loaders...
INFO : 4/11/2022 2:31:48 PM > Loader send successfuly.
INFO : 4/11/2022 2:31:48 PM > Reading Flash Info...
INFO : 4/11/2022 2:31:49 PM > EMMC rpmb size: 4 Mb
INFO : 4/11/2022 2:31:49 PM > EMMC boot1 size: 4 Mb
INFO : 4/11/2022 2:31:49 PM > EMMC boot2 size: 4 Mb
INFO : 4/11/2022 2:31:49 PM > EMMC gp1 size: 0 Mb
INFO : 4/11/2022 2:31:49 PM > EMMC gp2 size: 0 Mb
INFO : 4/11/2022 2:31:49 PM > EMMC gp3 size: 0 Mb
INFO : 4/11/2022 2:31:49 PM > EMMC gp4 size: 0 Mb
INFO : 4/11/2022 2:31:49 PM > EMMC user area size: 15028 Mb
INFO : 4/11/2022 2:31:49 PM > Internal RAM size: 128 Kb
INFO : 4/11/2022 2:31:49 PM > External RAM size: 1024 Mb
INFO : 4/11/2022 2:31:50 PM > Reading partition...
INFO : 4/11/2022 2:31:50 PM > Reading info...
INFO : 4/11/2022 2:31:50 PM > Brand: TM-MID790Q
INFO : 4/11/2022 2:31:50 PM > Manufacturer: TOUCHMATE
INFO : 4/11/2022 2:31:50 PM > Model: TM-MID790Q
INFO : 4/11/2022 2:31:50 PM > Device: along8321_tb_m_706m
INFO : 4/11/2022 2:31:50 PM > Platform: mt6580
INFO : 4/11/2022 2:31:50 PM > Android version: 6.0
INFO : 4/11/2022 2:31:50 PM > Display ID: TOUCHMATE_TM-MID790Q_V1.0_20170712
INFO : 4/11/2022 2:31:50 PM > Searching for signatures...
INFO : 4/11/2022 2:31:50 PM > Resetting FRP lock..
INFO : 4/11/2022 2:31:55 PM > Backup saved as TM-MID790Q_TM-MID790Q_11-04-2022_14-31-50.dump file
WARN : 4/11/2022 2:31:55 PM > FRP lock is successfully reseted!
INFO : 4/11/2022 2:31:56 PM > Performed by 2.1.1.0 Software version.

not listed in touchmate ,select general and just connect
  Reply With Quote
The Following User Says Thank You to barakath For This Useful Post:
Old 04-12-2022, 08:14   #7009 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,882
Member: 193804
Status: Online
Sonork: 100.1684818
Thanks Meter: 1,412
Wink XIAOMI MI 8 Mi Account is successfully reseted!

Work ID: 00000000019D33F0
Platform: XIAOMI
Selected model: MI 8
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM49
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0008B0E100720000
QC CPU: Snapdragon 845 SDM845
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 1659371745
Checking request..
Start Authentication...
Authentication done!
Checking request..
Reading partition...
Reading info...
Android version: 10
Firmware version: V12.0.3.0.QEAMIXM
Please, perform Hard Reset manually before starting Reset Mi Account operation. Continue?
Resetting Mi Account...
Reading MI part...
Writing MI part...
Reading MI2 part ...
Writing MI2 part...
Mi Account is successfully reseted!
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 04-12-2022, 19:12   #7010 (permalink)
Insane Poster
 
Join Date: Nov 2012
Location: COLOMBIA
Posts: 69
Member: 1842053
Status: Offline
Thanks Meter: 30
Tablet Krono NET 9

Welcome to Octoplus FRP Tool v.2.1.2.0
Card S/N: 00006ADF
Work ID: 00000000019E093B
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM7
Port name: MediaTek PreLoader USB VCOM (Android) (COM7)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 0000
BootLoader Version: 01
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .D6010335.38413433.3174D434.392FC76D
eMMC Flash: Unknown: 58A431
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14940 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: alps
Manufacturer: KRONO
Model: NET9
Device: k80_bsp
Android version: 8.1.0
Display ID: E30V1.0_JZ01_ES_GTTP_FL_WXGA_20210408
Factory Reset...
Method 1 ...
Formatting User Data section
Factory Reset is successfully performed!
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to Mr jhonson For This Useful Post:
Old 04-13-2022, 10:30   #7011 (permalink)
Insane Poster
 
Join Date: Aug 2017
Location: Dhaka. Bangladesh
Posts: 73
Member: 2743172
Status: Offline
Sonork: Gsmhosting
Thanks Meter: 31
Donate money to this user
Walton GH10 FRP Remove Done

Walton GH10 FRP Remove Done

Work ID: 00000000019EA6BA
Platform: __GENERAL RESET FRP METHODS
Selected model: SC9863A SIGN V4
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 2.1.1.0 Software version.
HEre IS Dump
  Reply With Quote
The Following 2 Users Say Thank You to Gsm_Flash Baba For This Useful Post:
Old 04-13-2022, 13:09   #7012 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,882
Member: 193804
Status: Online
Sonork: 100.1684818
Thanks Meter: 1,412
Wink HUAWEI DUB-LX1 FRP lock is successfully reseted!

Work ID: 00000000019ED78E
Platform: HUAWEI
Selected model: DUB-LX1
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Connecting...
Reading info...
QC HW ID: 0009A0E100150065
QC CPU: Snapdragon 450 SDM450
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Checking request..
Reading partition...
Reading info...
Android version: 8.1.0
Display ID: System 8.2.0.036(1V4E)
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as HUAWEI_DUB-LX1_13-04-2022_13-59-05.dump file
FRP lock is successfully reseted!
Performed by 2.1.2.0 Software version
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 04-14-2022, 10:56   #7013 (permalink)
No Life Poster
 
Join Date: Dec 2009
Location: PAKISTAN
Posts: 1,748
Member: 1185918
Status: Offline
Sonork: 100.1617322
Thanks Meter: 200
Samsung A015F u4 Frp Remove

Work ID: 00000000019FEA8F
Platform: SAMSUNG
Selected model: SM-A015F
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Connecting...
Reading info...
QC HW ID: 000BF0E100200000
QC CPU: Snapdragon 439 SDM439
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading SUPER partition...
Reading info...
Android version: 10
Display ID: QP1A.190711.020.A015FXXU4AUB2
Firmware version: A015FXXU4AUB2
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as SAMSUNG_SM-A015F_14-04-2022_14-25-12.dump file
FRP lock is successfully reseted!
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to qasir_amz For This Useful Post:
Old 04-18-2022, 21:23   #7014 (permalink)
No Life Poster
 
bencharqui1's Avatar
 
Join Date: Aug 2011
Location: Algeria is a North African
Posts: 1,733
Member: 1629321
Status: Online
Thanks Meter: 761
Wink Firmware Write condor Plume H1 done

Firmware Write condor Plume H1 done


Platform: XIAOMI
Selected model: MI A1
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM35
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Condor
Model: Plume H1
Device: SP620
Platform: msm8953
Android version: 7.1.2
Display ID: N2G47H release-keys
Firmware version: 9026
Writing firmware...
Selected firmware files:
E:\SP620_V33.0_20171226_nodiag_DCC\ALL_HLOS.FILES. TOOLS_DOWNLOAD\rawprogram_unsparse.xml
E:\SP620_V33.0_20171226_nodiag_DCC\ALL_HLOS.FILES. TOOLS_DOWNLOAD\patch0.xml
Opening "E:\SP620_V33.0_20171226_nodiag_DCC\ALL_HLOS.FILES .TOOLS_DOWNLOAD\rawprogram_unsparse.xml"...
Writing modem...
Writing sbl1...
Writing sbl1bak...
Writing rpm...
Writing rpmbak...
Writing tz...
Writing tzbak...
Writing devcfg...
Writing devcfgbak...
Writing dsp...
Writing modemst1...
Writing modemst2...
Writing fsg...
Writing sec...
Writing splash...
Writing aboot...
Writing abootbak...
Writing boot...
Writing recovery...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing cache...
Writing cache...
Writing cache...
Writing persist...
Writing misc...
Writing mdtp...
Writing cmnlib...
Writing cmnlibbak...
Writing cmnlib64...
Writing cmnlib64bak...
Writing keymaster...
Writing keymasterbak...
Writing apdp...
Writing msadp...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing PrimaryGPT...
Writing BackupGPT...
Opening "E:\SP620_V33.0_20171226_nodiag_DCC\ALL_HLOS.FILES .TOOLS_DOWNLOAD\patch0.xml"...
Writing Patch...
Firmware Write successfully.
Performed by 2.1.2.2 Software version.
  Reply With Quote
The Following User Says Thank You to bencharqui1 For This Useful Post:
Old 04-20-2022, 12:26   #7015 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 670
Member: 746586
Status: Offline
Thanks Meter: 185
Work ID: 0000000001A65C10
Platform: XIAOMI
Selected model: REDMI 4A
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4A
Device: rolex
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Firmware version: V10.2.3.0.NCCMIXM
Please, perform Hard Reset manually before starting Reset Mi Account operation. Continue?
Resetting Mi Account...
Reading MI part...
Writing MI part...
Reading MI2 part ...
Writing MI2 part...
Mi Account is successfully reseted!
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to apacheadmiral For This Useful Post:
Old 04-21-2022, 07:09   #7016 (permalink)
No Life Poster
 
xerraco's Avatar
 
Join Date: Nov 2008
Location: RVIII
Posts: 11,073
Member: 890926
Status: Offline
Thanks Meter: 1,897
Quote:
Originally Posted by apacheadmiral View Post
Work ID: 00000000019BF153
Platform: NOKIA
Selected model: TA-1365
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM11
Port name: Qualcomm HS-USB QDLoader 9008 (COM11)
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E7
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59000 Mb
eMMC Flash: .88010353.4C443634.47604604.00B158E7
eMMC Flash: Foresee: SLD64G
Internal RAM size: 232 Kb
External RAM size: 4096 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Nokia
Manufacturer: HMD Global
Model: Nokia G20
Device: RNN_sprout
Android version: 11
Display ID: 00WW_1_180_SP02
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as Nokia_Nokia G20_11-04-2022_09-58-09.dump file
FRP lock is successfully reseted!
Performed by 2.1.1.0 Software version.

Im confused
Quote:
Work ID: 00000000019BF153
Platform: NOKIA
Selected model: TA-1365
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM11
Port name: Qualcomm HS-USB QDLoader 9008 (COM11)
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E7
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Why?


Br.
xerraco
  Reply With Quote
The Following User Says Thank You to xerraco For This Useful Post:
Old 04-21-2022, 08:17   #7017 (permalink)
No Life Poster
 
bootgsm's Avatar
 
Join Date: Jun 2007
Location: Ain Jloula / Kairouan
Posts: 636
Member: 527800
Status: Offline
Thanks Meter: 234
redmi 10 frp done model selected redmi 9

Work ID: 0000000001A75C88
Platform: XIAOMI
Selected model: REDMI 9
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6768: 0707.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E7
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6768: 0707.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC Flash: .15010044.50364441.42034AD5.CAEF78F3
eMMC Flash: Samsung: DP6DAB
Internal RAM size: 448 Kb
External RAM size: 4096 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Redmi
Manufacturer: Xiaomi
Model: 21061119AG
Device: selene
Market name: Redmi 10
Android version: 11
Display ID: AL5186-selene-build-20211221221220
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as Redmi_21061119AG_21-04-2022_09-11-39.dump file
FRP lock is successfully reseted!
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to bootgsm For This Useful Post:
Old 04-21-2022, 10:01   #7018 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 670
Member: 746586
Status: Offline
Thanks Meter: 185
Welcome to Octoplus FRP Tool v.2.1.2.0
Work ID: 0000000001A7743A
Platform: MOBICEL
Selected model: R1
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM55
Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM55)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 0001
BootLoader Version: 01
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A5C338.E8FB8591
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Mobicel
Manufacturer: Mobicel
Model: Mobicel_R1
Device: Mobicel_R1
Platform: mt6580
Android version: 7.0
Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P144
Searching for signatures...
Resetting FRP lock..
Backup saved as Mobicel_Mobicel_R1_21-04-2022_10-38-05.dump file
FRP lock is successfully reseted!
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to apacheadmiral For This Useful Post:
Old 04-21-2022, 10:10   #7019 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 670
Member: 746586
Status: Offline
Thanks Meter: 185
Work ID: 0000000001A77658
Platform: SAMSUNG
Selected model: SM-J700H
Reset FRP/ Reactivation lock operation for SM-J700H will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Could not connect to the server!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J700H into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 2.1.2.0 Software version
  Reply With Quote
The Following User Says Thank You to apacheadmiral For This Useful Post:
Old 04-22-2022, 12:52   #7020 (permalink)
Freak Poster
 
janda's Avatar
 
Join Date: May 2006
Location: Slovakia
Posts: 321
Member: 272319
Status: Offline
Thanks Meter: 98
Oppo A16 (CPH2271) frp done (not in list of supoorted models)

FRP succesfully removed by selecting A15 (CPH2185)

Quote:
Work ID: 0000000001A8CC82
Platform: OPPO
Selected model: A15 (CPH2185)
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 2.1.2.0 Software version.

Work ID: 0000000001A8CD3D
Platform: OPPO
Selected model: A15 (CPH2185)
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E5
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Reading preloader...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2019-09-13.17:00_485156, n.28
Prepairing Download Agent...
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC Flash: .90014A68.43386150.3E03100F.11B488BF
eMMC Flash: Hynix: hC8aP>
Internal RAM size: 224 Kb
External RAM size: 4096 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: alps
Manufacturer: alps
Model: oplus_mssi_64_cn
Device: oplus_mssi_64_cn
Android version: 11
Display ID: RP1A.200720.011 release-keys
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as alps_oplus_mssi_64_cn_22-04-2022_13-00-22.dump file
FRP lock is successfully reseted!
Performed by 2.1.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to janda For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 14:16.



Powered by Searchlight © 2022 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2022 -
Page generated in 0.17654 seconds with 8 queries

SEO by vBSEO