|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
10-07-2022, 17:38
| #7351 (permalink) |
| Freak Poster  Join Date: Jan 2020 Location: servis GENCI&GERI PG. AL
Posts: 392
Member: 2945914 Status: Offline Thanks Meter: 462 | doogee Y7 frp removed Platform: DOOGEE Selected model: Y7 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM77 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: DOOGEE Model: Y7 Device: Y7 Android version: 8.1.0 Display ID: DOOGEE_Y7_Android8.1-20190112 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Performed by 2.1.9.0 Software version. |
 |
| The Following User Says Thank You to Genci&Geri For This Useful Post: |
|
10-07-2022, 17:39
| #7352 (permalink) |
| Freak Poster Join Date: Jan 2020 Location: servis GENCI&GERI PG. AL
Posts: 392
Member: 2945914 Status: Offline Thanks Meter: 462 | samsung A12 frp removed Welcome to Octoplus FRP Tool v.2.2.0.1 Card S/N: 2000***** Work ID: 0000000001A4E5D7 Searching for device. Please wait... Waiting for device... Found device on COM92 Reading info... Detected device model: SM-A127F HW Version: COS PDA version: A127FXXU5AVC4 CSC version: A127FOXM5AVC4 CP version: A127FXXU5AVC3 Device SN: R58RB0DDP6X Device IMEI: 355016-40-******-* Android version: 11 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Resetting FRP lock.. Perform factory reset to complete operation! Performed by 2.2.0.1 Software version. |
| |
| The Following User Says Thank You to Genci&Geri For This Useful Post: |
|
10-08-2022, 08:33
| #7353 (permalink) |
| No Life Poster   Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,229
Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,746 |  SM-J250F Resetting FRP lock.. ok Work ID: 00000000019823EA Searching for device. Please wait... Waiting for device... Found device on COM32 Reading info... Detected device model: SM-J250F HW Version: MID PDA version: J250FXXS2ARE1 CSC version: J250FOJV2ARH1 CP version: J250FXXS2ARF1 Device SN: RV8K80DP0LW Device IMEI: 359661-09-327741-2 Android version: 7.1.1 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Resetting FRP lock.. Perform factory reset to complete operation! Performed by 2.2.0.0 Software version. |
| |
| The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post: |
|
10-09-2022, 11:35
| #7354 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,229
Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,746 | SM-A025F FRP lock is successfully reseted! Work ID: 0000000001A58E8E Platform: SAMSUNG Selected model: SM-A025F Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Searching for a phone. Please wait... Connecting... Reading info... QC HW ID: 0009A0E100200000 QC CPU: Snapdragon 450 SDM450 QC SW VER: 00000001 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading SUPER partition... Reading info... Android version: 11 Display ID: RP1A.200720.012.A025FXXU3BUJ7 Firmware version: A025FXXU3BUJ7 Resetting FRP lock.. Searching for signatures... Rebooting phone Backup saved as SAMSUNG_SM-A025F_09-10-2022_12-31-00.dump file FRP lock is successfully reseted! Performed by 2.2.0.0 Software version |
| |
| The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post: |
|
10-10-2022, 07:33
| #7355 (permalink) |
| Freak Poster  Join Date: Jan 2008 Location: philippines
Posts: 346
Member: 669596 Status: Offline Sonork: 1657504 Thanks Meter: 136 | BQ AQUARIS X2 Frp Done... BQ AQUARIS X2 Frp Done... Code: Work ID: 0000000001ADA14A Platform: BQ Selected model: AQUARIS X2 Selected port: COM39 Selected port: Qualcomm HS-USB QDLoader 9008 (COM39) Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000CC0E100000000 QC CPU: Snapdragon 636 SDM636 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Chip SN: 4294967295 Checking request.. Reading partition... Reading info... Android version: 10 Display ID: 3.1.5_20201014-0834 Firmware version: 664 Resetting FRP lock.. Searching for signatures... Rebooting phone Backup saved as BQ_AQUARIS X2_10-10-2022_14-23-24.dump file FRP lock is successfully reseted! Performed by 2.2.0.2 Software version. |
| |
| The Following User Says Thank You to -=C.J.S=- For This Useful Post: |
|
10-10-2022, 10:01
| #7356 (permalink) |
| Freak Poster Join Date: Jan 2020 Location: servis GENCI&GERI PG. AL
Posts: 392
Member: 2945914 Status: Offline Thanks Meter: 462 | sams a12 frp removed Welcome to Octoplus FRP Tool v.2.2.0.2 Card S/N: 2000***** Work ID: 000000000198D474 Searching for device. Please wait... Waiting for device... Found device on COM95 Reading info... Detected device model: SM-A127F HW Version: COS PDA version: A127FXXU4AUK1 CSC version: A127FOXM4AUK2 CP version: A127FXXU4AUK1 Device SN: RF8T10KVS3T Device IMEI: 358077-20-******-* Android version: 11 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Resetting FRP lock.. Perform factory reset to complete operation! Performed by 2.2.0.2 Software version. |
| |
| The Following User Says Thank You to Genci&Geri For This Useful Post: |
|
10-11-2022, 17:00
| #7357 (permalink) |
| Freak Poster Join Date: Jan 2020 Location: servis GENCI&GERI PG. AL
Posts: 392
Member: 2945914 Status: Offline Thanks Meter: 462 | j5 prime frp removed Welcome to Octoplus FRP Tool v.2.2.1.0 Card S/N: 2000***** Work ID: 00000000018C4BD0 Searching for device. Please wait... Waiting for device... Found device on COM49 Reading info... Detected device model: SM-G570F HW Version: XSG PDA version: G570FXXS3CTF2 CSC version: G570FOJV3CTF2 CP version: G570FXXS3CTF1 Device SN: R28JC0JWQTP Device IMEI: 354503-09-******-* Android version: 8.0.0 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Resetting FRP lock.. Perform factory reset to complete operation! Performed by 2.2.1.0 Software version. |
| |
| The Following User Says Thank You to Genci&Geri For This Useful Post: |
|
10-12-2022, 10:05
| #7358 (permalink) |
| No Life Poster  Join Date: Apr 2011 Age: 58
Posts: 16,438
Member: 1564612 Status: Offline Thanks Meter: 12,354  |  Oppo a15 (cph2185) reset pin lock + FRP by octopus frp OPPO A15 (CPH2185) RESET PIN/PATTERN LOCK DONE BY OCTOPUS FRP   LOG: Code: Work ID: 0000000001A685D3 Platform: OPPO Selected model: A15 (CPH2185) Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Searching for a phone. Please wait... Found phone on COM3 Port name: MediaTek USB Port (COM3) Detecting Chip Version... HW Chip: MT6765: 0766.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Target Config: 00E5 BootLoader Version: FE Brom Version: 05 BootLoader Version: FE Disabling protection... Reconnecting... Detecting Chip Version... HW Chip: MT6765: 0766.0000 HW Version: 8A00.CA00.0000.0000 Target Config: 0000 Reading preloader... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20 Prepairing Download Agent... Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Error code: C0010004 Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 29820 Mb eMMC Flash: .15010044.5836384D.42092854.CC8F786D eMMC Flash: Samsung: DX68MB Internal RAM size: 232 Kb External RAM size: 3072 Mb Reading partition... Reading SUPER partition... Reading info... Android version: 10 Display ID: QP1A.190711.020 release-keys Factory Reset... Method 1 ... Formatting User Data section Factory Reset is successfully performed! Performed by 2.2.0.2 Software version.  LOG: Code: Work ID: 0000000001AE480E Platform: OPPO Selected model: A15 (CPH2185) Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Searching for a phone. Please wait... Found phone on COM3 Port name: MediaTek USB Port (COM3) Detecting Chip Version... HW Chip: MT6765: 0766.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Target Config: 00E5 BootLoader Version: FE Brom Version: 05 BootLoader Version: FE Disabling protection... Reconnecting... Detecting Chip Version... HW Chip: MT6765: 0766.0000 HW Version: 8A00.CA00.0000.0000 Target Config: 0000 Reading preloader... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20 Prepairing Download Agent... Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Error code: C0010004 Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 29820 Mb eMMC Flash: .15010044.5836384D.42092854.CC8F786D eMMC Flash: Samsung: DX68MB Internal RAM size: 232 Kb External RAM size: 3072 Mb Reading partition... Reading SUPER partition... Reading info... Android version: 10 Display ID: QP1A.190711.020 release-keys Searching for signatures... Switching to high-speed success! Resetting FRP lock.. Backup saved as OPPO_A15 (CPH2185)_11-10-2022_20-28-19.dump file FRP lock is successfully reseted! Performed by 2.2.0.2 Software version. Thank you @Octopus Team, device Pattern +FRP Done with success BR Allumts |
| |
| The Following User Says Thank You to allumts For This Useful Post: |
|
10-12-2022, 11:54
| #7359 (permalink) |
| Freak Poster Join Date: Jan 2020 Location: servis GENCI&GERI PG. AL
Posts: 392
Member: 2945914 Status: Offline Thanks Meter: 462 | huawei y7 2019 frp removed Welcome to Octoplus FRP Tool v.2.2.0.2 Card S/N: 2000***** Work ID: 0000000001AE7CC1 Platform: HUAWEI Selected model: DUB-LX1 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Searching for a phone. Please wait... Connecting... Reading info... QC HW ID: 0009A0E100150065 QC CPU: Snapdragon 450 SDM450 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Checking request.. Reading partition... Reading info... Android version: 8.1.0 Display ID: System 8.2.0.036(1V4E) Resetting FRP lock.. Searching for signatures... Rebooting phone Backup saved as HUAWEI_DUB-LX1_12-10-2022_12-52-03.dump file FRP lock is successfully reseted! Performed by 2.2.0.2 Software version. |
| |
| The Following 2 Users Say Thank You to Genci&Geri For This Useful Post: |
|
10-12-2022, 18:40
| #7360 (permalink) |
| No Life Poster  Join Date: Aug 2011 Location: Algeria is a North African Age: 36
Posts: 1,889
Member: 1629321 Status: Offline Thanks Meter: 830 |  Brand: Condor Model: Plume H1 Device: SP620 Writing firmware and Reset FRP Platform: XIAOMI Selected model: REDMI Y2 Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. No diagnostic ports found! Performed by 2.2.1.0 Software version. Work ID: 00000000018C433E Platform: XIAOMI Selected model: REDMI Y2 Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM19 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000460E100000000 QC CPU: Snapdragon 625 MSM8953 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Condor Model: Plume H1 Device: SP620 Platform: msm8953 Android version: 7.1.2 Display ID: N2G47H release-keys Firmware version: 2578 Writing firmware... Selected firmware files: C:\Users\tikk\Desktop\ALL_HLOS.FILES.TOOLS_DOWNLOA D\rawprogram_unsparse.xml C:\Users\tikk\Desktop\ALL_HLOS.FILES.TOOLS_DOWNLOA D\patch0.xml Opening "C:\Users\tikk\Desktop\ALL_HLOS.FILES.TOOLS_DOWNLO AD\rawprogram_unsparse.xml"... Writing modem... Writing sbl1... Writing sbl1bak... Writing rpm... Writing rpmbak... Writing tz... Writing tzbak... Writing devcfg... Writing devcfgbak... Writing dsp... Writing modemst1... Writing modemst2... Writing fsg... Writing sec... Writing splash... Writing aboot... Writing abootbak... Writing boot... Writing recovery... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing cache... Writing cache... Writing cache... Writing persist... Writing misc... Writing mdtp... Writing cmnlib... Writing cmnlibbak... Writing cmnlib64... Writing cmnlib64bak... Writing keymaster... Writing keymasterbak... Writing apdp... Writing msadp... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing PrimaryGPT... Writing BackupGPT... Opening "C:\Users\tikk\Desktop\ALL_HLOS.FILES.TOOLS_DOWNLO AD\patch0.xml"... Writing Patch... Firmware Write successfully. Performed by 2.2.1.0 Software version. Work ID: 0000000001A6FCDF Platform: XIAOMI Selected model: REDMI Y2 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM19 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000460E100000000 QC CPU: Snapdragon 625 MSM8953 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Condor Model: Plume H1 Device: SP620 Platform: msm8953 Android version: 7.1.2 Display ID: N2G47H release-keys Firmware version: 9026 Resetting FRP lock.. Searching for signatures... Rebooting phone Backup saved as Condor_Plume H1_12-10-2022_18-37-28.dump file FRP lock is successfully reseted! Performed by 2.2.1.0 Software version. |
| |
| The Following User Says Thank You to bencharqui1 For This Useful Post: |
|
10-13-2022, 13:40
| #7361 (permalink) |
| Freak Poster Join Date: Jan 2020 Location: servis GENCI&GERI PG. AL
Posts: 392
Member: 2945914 Status: Offline Thanks Meter: 462 | A125f frp removed Welcome to Octoplus FRP Tool v.2.2.0.2 Card S/N: 2000***** Work ID: FFFFFFFFFFFFFFFF Searching for device. Please wait... Waiting for device... Found device on COM97 Reading info... Detected device model: SM-A125F HW Version: ECT PDA version: A125FXXU2BVG6 CSC version: A125FOJM2BVG6 CP version: A125FXXU2BVG6 Device SN: R58R20BMGKK Device IMEI: 350711-55-******-* Android version: 11 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Please, press "OK" button on the phone to allow USB debugging.. Phone found. Resetting FRP lock.. Perform factory reset to complete operation! Performed by 2.2.0.2 Software version. |
| |
| The Following User Says Thank You to Genci&Geri For This Useful Post: |
|
10-13-2022, 14:40
| #7362 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,229
Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,746 | SM-J120A Resetting FRP lock..ok Work ID: 0000000001AEE7B5 Searching for device. Please wait... Waiting for device... Found device on COM15 Reading info... Detected device model: SM-J120A HW Version: SM2J120AZWCATT PDA version: J120AUCU1APC8 CSC version: J120AATT1APC8 CP version: J120AUCU1APC8 Device SN: R58H80CAHXY Device IMEI: 356266-07-865075-8 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Resetting FRP lock.. Perform factory reset to complete operation! Performed by 2.2.0.2 Software version. |
| |
| The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post: |
|
10-14-2022, 10:07
| #7363 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,229
Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,746 | DOOGEE X50 FRP lock is successfully reseted! Work ID: 0000000001AF2A2F Platform: DOOGEE Selected model: X50 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM7 Port name: MediaTek PreLoader USB VCOM_V1633 (Android) (COM7) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Target Config: 0000 BootLoader Version: 01 Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .8801034E.43617264.20013801.632F4565 eMMC Flash: Foresee: NCard DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: DOOGEE Manufacturer: Vanzo Model: X50 Device: X50 Android version: 8.1.0 Display ID: DOOGEE-X50-Android go-20180428 Searching for signatures... Resetting FRP lock.. Backup saved as DOOGEE_X50_14-10-2022_11-06-24.dump file FRP lock is successfully reseted! Performed by 2.2.0.2 Software version. |
| |
| The Following User Says Thank You to genci titi 2002 For This Useful Post: |
|
10-14-2022, 11:06
| #7364 (permalink) |
| Freak Poster Join Date: Jan 2020 Location: servis GENCI&GERI PG. AL
Posts: 392
Member: 2945914 Status: Offline Thanks Meter: 462 | p8 lite frp removed Work ID: 00000000018CE436 Platform: HUAWEI Selected model: PRA-LX1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: PRA-LX1 Phone SN: 9DC7N17720000855 Phone IMEI: 865316039139989 Phone IMEI2: 865316039169994 SW version: PRA-LX1 8.0.0.416(C432) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 2.2.0.2 Software version. |
| |
| The Following 2 Users Say Thank You to Genci&Geri For This Useful Post: |
|
10-15-2022, 09:50
| #7365 (permalink) |
| No Life Poster  Join Date: Jun 2007 Location: BULGARIA_SOFIA
Posts: 1,438
Member: 526292 Status: Offline Sonork: 100.1597116 Thanks Meter: 444 | REDMI 10 GLOBAL FRP DONE GREAT TEAM Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\15-10-2022_11-32-42.log" created (15.10.2022 г. 11:32:43). INFO : 15.10.2022 г. 11:33:03 > Welcome to Octoplus FRP Tool v.2.2.1.0 INFO : 15.10.2022 г. 11:33:03 > Card S/N: 200000893 INFO : 15.10.2022 г. 11:35:30 > Work ID: 0000000001AF7CF1 INFO : 15.10.2022 г. 11:35:30 > Platform: XIAOMI INFO : 15.10.2022 г. 11:35:30 > Selected model: REDMI 10 WARN : 15.10.2022 г. 11:35:30 > Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. INFO : 15.10.2022 г. 11:35:30 > Searching for a phone. Please wait... INFO : 15.10.2022 г. 11:35:51 > Found phone on INFO : 15.10.2022 г. 11:35:51 > Detecting Chip Version... INFO : 15.10.2022 г. 11:35:51 > HW Chip: MT6768: 0707.0000 INFO : 15.10.2022 г. 11:35:51 > HW Version: 8A00.CA00.0000.0000 INFO : 15.10.2022 г. 11:35:51 > Connecting... INFO : 15.10.2022 г. 11:35:51 > Target Config: 00E7 INFO : 15.10.2022 г. 11:35:51 > BootLoader Version: FE WARN : 15.10.2022 г. 11:35:51 > Brom Version: 05 INFO : 15.10.2022 г. 11:35:51 > BootLoader Version: FE INFO : 15.10.2022 г. 11:35:51 > Disabling protection... INFO : 15.10.2022 г. 11:35:52 > Reconnecting... INFO : 15.10.2022 г. 11:35:52 > Detecting Chip Version... INFO : 15.10.2022 г. 11:35:52 > HW Chip: MT6768: 0707.0000 INFO : 15.10.2022 г. 11:35:52 > HW Version: 8A00.CA00.0000.0000 INFO : 15.10.2022 г. 11:35:52 > Target Config: 0000 INFO : 15.10.2022 г. 11:35:52 > Searching Download Agent... INFO : 15.10.2022 г. 11:35:56 > Selected DA: MTK_AllInOne_DA_v3.3001.2020/07/07.10:10_513994, n.2 INFO : 15.10.2022 г. 11:35:56 > Sending Download Agent... INFO : 15.10.2022 г. 11:35:57 > DA sent successfully INFO : 15.10.2022 г. 11:35:57 > Initializing DA... INFO : 15.10.2022 г. 11:35:57 > Synchronizing with DA... INFO : 15.10.2022 г. 11:35:57 > Mobile Status: SYNC ERROR : 15.10.2022 г. 11:35:57 > Error code: C0010004 INFO : 15.10.2022 г. 11:35:57 > Mobile Status: brom INFO : 15.10.2022 г. 11:35:57 > Sending BootLoader Info... INFO : 15.10.2022 г. 11:35:58 > Initializing Memory Flash.. INFO : 15.10.2022 г. 11:35:58 > Initialization successfully completed INFO : 15.10.2022 г. 11:35:58 > Sending loaders... INFO : 15.10.2022 г. 11:35:59 > Mobile Status: SYNC INFO : 15.10.2022 г. 11:35:59 > Reading Flash Info... INFO : 15.10.2022 г. 11:35:59 > EMMC rpmb size: 16 Mb INFO : 15.10.2022 г. 11:35:59 > EMMC boot1 size: 4 Mb INFO : 15.10.2022 г. 11:35:59 > EMMC boot2 size: 4 Mb INFO : 15.10.2022 г. 11:35:59 > EMMC gp1 size: 0 Mb INFO : 15.10.2022 г. 11:35:59 > EMMC gp2 size: 0 Mb INFO : 15.10.2022 г. 11:35:59 > EMMC gp3 size: 0 Mb INFO : 15.10.2022 г. 11:35:59 > EMMC gp4 size: 0 Mb INFO : 15.10.2022 г. 11:35:59 > EMMC user area size: 119280 Mb INFO : 15.10.2022 г. 11:35:59 > eMMC Flash: .13014E47.314A3953.391015DE.53DC8831 INFO : 15.10.2022 г. 11:35:59 > eMMC Flash: Unknown: G1J9S9 INFO : 15.10.2022 г. 11:35:59 > Internal RAM size: 448 Kb INFO : 15.10.2022 г. 11:35:59 > External RAM size: 4096 Mb INFO : 15.10.2022 г. 11:35:59 > Reading partition... INFO : 15.10.2022 г. 11:35:59 > Reading SUPER partition... INFO : 15.10.2022 г. 11:35:59 > Reading info... INFO : 15.10.2022 г. 11:36:03 > Brand: Redmi INFO : 15.10.2022 г. 11:36:03 > Manufacturer: Xiaomi INFO : 15.10.2022 г. 11:36:03 > Model: 21061119AG INFO : 15.10.2022 г. 11:36:03 > Device: selene INFO : 15.10.2022 г. 11:36:03 > Market name: Redmi 10 INFO : 15.10.2022 г. 11:36:03 > Android version: 11 INFO : 15.10.2022 г. 11:36:03 > Display ID: AL5186-selene-build-20220815155641 INFO : 15.10.2022 г. 11:36:03 > Searching for signatures... INFO : 15.10.2022 г. 11:36:03 > Switching to high-speed success! INFO : 15.10.2022 г. 11:36:03 > Resetting FRP lock.. INFO : 15.10.2022 г. 11:36:05 > Backup saved as Redmi_21061119AG_15-10-2022_11-36-04.dump file WARN : 15.10.2022 г. 11:36:05 > FRP lock is successfully reseted! INFO : 15.10.2022 г. 11:36:05 > Performed by 2.2.1.0 Software version. INFO : 15.10.2022 г. 11:36:05 > |
| |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
|
|
Linear Mode
