GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 11-12-2022, 12:39   #7426 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,984
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,509
Wink SM-J530F Resetting FRP lock..ok


Work ID: 0000000001B36147
Searching for device. Please wait...
Waiting for device...
Found device on COM46
Reading info...
Detected device model: SM-J530F
HW Version: EUR
PDA version: J530FXXS5BSE3
CSC version: J530FOXX5BSC3
CP version: J530FXXS5BSF2
Device SN: RF8J61SWYZX
Device IMEI: 356437-08-141901-6
Android version: 8.1.0
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 11-12-2022, 15:22   #7427 (permalink)
Freak Poster
 
Join Date: Oct 2011
Location: SPAIN
Posts: 200
Member: 1679218
Status: Offline
Thanks Meter: 43
redmi 4x

Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM8
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0006B0E100000000
QC CPU: Snapdragon 435 MSM8940
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4X
Device: santoni
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Firmware version: V10.3.1.0.NAMMIXM
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as Xiaomi_Redmi 4X_12-11-2022_15-13-37.dump file
FRP lock is successfully reseted!
  Reply With Quote
The Following User Says Thank You to kingkong71 For This Useful Post:
Old 11-13-2022, 10:29   #7428 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
redmi note 8 frp removed

Work ID: 00000000018C6B6B
Platform: XIAOMI
Selected model: REDMI NOTE 8
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM19
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0010A0E100720000
QC CPU: Snapdragon 665 SM6125
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 1533215831
Checking request..
Start Authentication...
Authentication done!
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 8
Device: ginkgo
Android version: 9
Display ID: PKQ1.190616.001
Firmware version: V11.0.12.0.PCOMIXM
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as xiaomi_Redmi Note 8_13-11-2022_10-09-23.dump file
FRP lock is successfully reseted!
Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 11-13-2022, 10:40   #7429 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
redmi 9At frp removed

Welcome to Octoplus FRP Tool v.2.2.2.0
Card S/N: 2000*****
Work ID: 00000000018C6DA8
Platform: XIAOMI
Selected model: REDMI 9A
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E7
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2020/07/07.10:10_513994, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .9B010059.32503033.32005CD0.1A4388CF
eMMC Flash: Unknown: Y2P032
Internal RAM size: 448 Kb
External RAM size: 2048 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Redmi
Manufacturer: Xiaomi
Model: M2006C3LG
Device: dandelion
Market name: Redmi 9A
Android version: 10
Display ID: QP1A.190711.020
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Error code: C002000C
Backup saved as Redmi_M2006C3LG_13-11-2022_10-37-17.dump file
FRP lock is successfully reseted!

Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 11-13-2022, 13:17   #7430 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
samsung galaxy note 8

Work ID: FFFFFFFFFFFFFFFF
Searching for device. Please wait...
Waiting for device...
Found device on COM21
Reading info...
Detected device model: SM-N950U
HW Version: ATT
PDA version: N950USQS6DSG6
CSC version: N950UOYN6DSG6
CP version: N950USQS6DSG6
Device SN: R38J80NHSBR
Device IMEI: 358502-08-067531-0
Android version: 9
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 11-13-2022, 14:54   #7431 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
samsung A20 frp removed

Work ID: 0000000001B3C47F
Searching for device. Please wait...
Waiting for device...
Found device on COM22
Reading info...
Detected device model: SM-A205F
HW Version: XSG
PDA version: A205FXXS7ATD2
CSC version: A205FOJM7ATD3
CP version: A205FDDS7ATD2
Device SN: RZ8M51PWD8A
Device IMEI: 356926-10-******-*
Android version: 9
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Please, go to dial window and enter "*#0*#".
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 11-14-2022, 13:17   #7432 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,984
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,509
Wink SM-A127F Resetting FRP lock..ok

Work ID: 0000000001B415CB
Searching for device. Please wait...
Waiting for device...
Found device on COM47
Reading info...
Detected device model: SM-A127F
HW Version: SIO
PDA version: A127FXXS5AVE1
CSC version: A127FOXM5AVC5
CP version: A127FXXS5AVE1
Device SN: R58RA2K66VV
Device IMEI: 350832-41-763918-6
Android version: 11
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 11-14-2022, 14:46   #7433 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
samsung note 8 frp

Welcome to Octoplus FR*****13D99
Work ID: 0000000001B9B285
Searching for device. Please wait...
Waiting for device...
Found device on COM23
Reading info...
Detected device model: SM-N950U
HW Version: ATT
PDA version: N950USQS5DSE8
CSC version: N950UOYN5DSE8
CP version: N950USQS5DSE8
Device SN: R38JA05DKFY
Device IMEI: 358502-08-******-*
Android version: 9
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to Genci&Geri For This Useful Post:
Old 11-15-2022, 08:41   #7434 (permalink)
No Life Poster
 
Join Date: Jul 2006
Posts: 596
Member: 306676
Status: Offline
Thanks Meter: 148
Huawei EVA-L09 FRP lock is successfully reseted!

Huawei EVA-L09 FRP lock is successfully reseted!
Code:
Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: xxxxxxxx
Work ID: 00000000018D1CDC
Platform: HUAWEI
Selected model: EVA-L09
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: EVA-L09
Phone SN: MWS0216A21000697
Phone IMEI: 86283xxxxxxxxxx
Phone IMEI2: 86283xxxxxxxxxx
SW version: EVA-L09C432B506
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to services_mobile For This Useful Post:
Old 11-15-2022, 15:54   #7435 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
redmi 9a frp removed

Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 2000*****
Work ID: 0000000001B4990A
Platform: XIAOMI
Selected model: REDMI 9A
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E7
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2020/07/07.10:10_513994, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .45010044.41343033.32016D47.E342B75B
eMMC Flash: Sandisk: DA4032
Internal RAM size: 448 Kb
External RAM size: 2048 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Redmi
Manufacturer: Xiaomi
Model: M2006C3LG
Device: dandelion
Market name: Redmi 9A
Android version: 10
Display ID: QP1A.190711.020
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Error code: C002000C
Backup saved as Redmi_M2006C3LG_15-11-2022_15-51-43.dump file
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 11-16-2022, 08:31   #7436 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,984
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,509
Wink CAT S41 FRP lock is successfully reseted!

Work ID: 00000000018CA8F6
Platform: CATERPILLAR
Selected model: CAT S41
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM7
Port name: USB Serial Device (COM7)
Detecting Chip Version...
HW Chip: MT6757: 0551.0000
HW Version: 8A00.CB00.0001.0000
Connecting...
Target Config: 0005
BootLoader Version: 02
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017/06/19.U, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010052.5831424D.42076F5E.C6B784E3
eMMC Flash: Samsung: RX1BMB
Internal RAM size: 256 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Cat
Manufacturer: BullittGroupLimited
Model: S41
Device: CatS41
Platform: mt6757
Android version: 8.0.0
Display ID: LTE_D0201121.0_S41_1.025.00
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as Cat_S41_16-11-2022_08-26-11.dump file
FRP lock is successfully reseted!
Performed by 2.2.2.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 11-16-2022, 13:05   #7437 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
coolpad cp3505i frp removed

Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 2000*****
Work ID: 0000000001BA5EDB
Platform: COOLPAD
Selected model: CP3505I
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM15
Port name: MediaTek PreLoader USB VCOM (Android) (COM15)
Detecting Chip Version...
HW Chip: MT6735: 0321.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Target Config: 0001
BootLoader Version: 01
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.4531334D.420D95BA.0689A21B
eMMC Flash: Samsung: QE13MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Coolpad
Manufacturer: Coolpad
Model: Coolpad E503
Device: CP3505I_U00
Platform: mt6735
Android version: 6.0
Display ID: V011
Searching for signatures...
Resetting FRP lock..
Backup saved as Coolpad_Coolpad E503_16-11-2022_13-01-25.dump file
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to Genci&Geri For This Useful Post:
Old 11-17-2022, 15:53   #7438 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
zte A31 lite frp done

Work ID: FFFFFFFFFFFFFFFF
Platform: ZTE
Selected model: A31 LITE
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM77
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 11-17-2022, 15:55   #7439 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
huawei GR3 frp removed

Work ID: 0000000001BACDF5
Platform: HUAWEI
Selected model: TAG-L01
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM15
Port name: MediaTek PreLoader USB VCOM (Android) (COM15)
Detecting Chip Version...
HW Chip: MT6753: 0337.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 0000
BootLoader Version: 01
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .11010030.31364733.3200FF47.3292A4F9
eMMC Flash: Toshiba: 016G32
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: HUAWEI
Manufacturer: HUAWEI
Model: HUAWEI TAG-L01
Device: HWTAG-L6753
Platform: mt6753
Android version: 5.1
Display ID: TAG-L01C212B131
Searching for signatures...
Resetting FRP lock..
Backup saved as HUAWEI_HUAWEI TAG-L01_17-11-2022_15-51-47.dump file
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to Genci&Geri For This Useful Post:
Old 11-18-2022, 09:41   #7440 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 251
Member: 2945914
Status: Offline
Thanks Meter: 300
samsungt A02 frp removed

Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 2000*****
Work ID: 00000000018D83EA
Searching for device. Please wait...
Waiting for device...
Found device on COM25
Reading info...
Detected device model: SM-A022F
HW Version: FWD
PDA version: A022FXXU2BUK3
CSC version: A022FOJM2BUJ3
CP version: A022FXXU2BUJ3
Device SN: R58R20GBYFR
Device IMEI: 351389-22-******-*
Android version: 11
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to Genci&Geri For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 13:24.



Powered by Searchlight © 2023 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2023 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2022 -
Page generated in 0.31700 seconds with 9 queries

SEO by vBSEO