GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 12-04-2022, 15:10   #7471 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,931
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,455
Wink Lenovo TB2-X30F FRP lock is successfully reseted!


Work ID: 0000000001BBD4B0
Platform: LENOVO
Selected model: TB2-X30F
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM6
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009680E100000000
QC CPU: Snapdragon 212 APQ8009
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo TB2-X30F
Device: TB2-X30F
Platform: msm8909
Android version: 5.1.1
Display ID: TB2-X30F_S000017_160701_ROW
Firmware version: TB2-X30F_S000017_160701_ROW
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as Lenovo_Lenovo TB2-X30F_04-12-2022_15-02-56.dump file
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 12-04-2022, 17:15   #7472 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 212
Member: 2945914
Status: Offline
Thanks Meter: 257
sams A310 frp removed

Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 2000*****
Work ID: 00000000019393A6
Searching for device. Please wait...
Waiting for device...
Found device on COM34
Reading info...
Detected device model: SM-A310F
HW Version: ROM
PDA version: A310FXXS5CTJ2
CSC version: A310FOXX5CTJ2
CP version: A310FXXS5CTJ2
Device SN: R28HB2BWQ4E
Device IMEI: 354162-08-******-*
Android version: 7.0
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to Genci&Geri For This Useful Post:
Old 12-05-2022, 13:19   #7473 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 212
Member: 2945914
Status: Offline
Thanks Meter: 257
redmi note 11S frp removed

Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 2000*****
Work ID: FFFFFFFFFFFFFFFF
Platform: XIAOMI
Selected model: REDMI NOTE 11S 4G
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6781: 1066.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E7
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6781: 1066.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Reading preloader...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.34
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
UFS Lun 0 : 4 Mb
UFS Lun 1 : 4 Mb
UFS Lun 2 : 122032 Mb
Internal RAM size: 384 Kb
External RAM size: 6144 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Redmi
Manufacturer: Xiaomi
Model: fleur
Device: fleur
Android version: 11
Display ID: RP1A.200720.011
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Error code: C002000C
Backup saved as Redmi_fleur_05-12-2022_13-15-38.dump file
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 12-06-2022, 09:50   #7474 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 212
Member: 2945914
Status: Offline
Thanks Meter: 257
redmo go frp done

Work ID: 0000000001943623
Platform: XIAOMI
Selected model: REDMI GO
Please, power phone OFF put the phone in EDL mode and connect USB cable.
Found phone on COM76
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi Go
Device: tiare
Android version: 8.1.0
Display ID: OPM1.171019.026.V10.2.19.0.OCLINXM
Firmware version: V10.2.19.0.OCLINXM
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as Xiaomi_Redmi Go_06-12-2022_09-49-00.dump file
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 12-06-2022, 10:16   #7475 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,931
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,455
Wink SM-A105G Resetting FRP lock..ok

Work ID: 00000000019437DD
Searching for device. Please wait...
Waiting for device...
Found device on COM61
Reading info...
Detected device model: SM-A105G
HW Version: XID
PDA version: A105GDXU7CUK3
CSC version: A105GOLE7CUK2
CP version: A105GDXU7CUK3
Device SN: RR8M708ZY0T
Device IMEI: 357080-10-919172-7
Android version: 11
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 12-06-2022, 15:50   #7476 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,931
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,455
Wink SM-J510FN Resetting FRP lock..ok

Work ID: 00000000019460DC
Searching for device. Please wait...
Waiting for device...
Found device on COM63
Reading info...
Detected device model: SM-J510FN
HW Version: ITV
PDA version: J510FNXXU2BQL1
CSC version: J510FNITV2BQK3
CP version: J510FNXWU2BQJ3
Device SN: RF8J12QLT9Z
Device IMEI: 355019-08-744178-9
Android version: 7.1.1
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to genci titi 2002 For This Useful Post:
Old 12-06-2022, 16:23   #7477 (permalink)
Freak Poster
 
Join Date: Sep 2007
Location: algeria
Age: 34
Posts: 450
Member: 580077
Status: Offline
Sonork: 100.1591941
Thanks Meter: 201
frp pop 5 bd2

Code:
Work ID: 000000000194633E
Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731 V7
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM368
Connecting...
Mobile Status: SPRD3
Sending preloader...
Reconnecting...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Qnet
Model: BD2
Device: sp7731g_1h10_32v4
Platform: sc8830
Android version: 6.0
Display ID: J065-BD2-POP 5-V01-20210807
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to nori2007 For This Useful Post:
Old 12-06-2022, 19:51   #7478 (permalink)
Major Poster
 
Join Date: Apr 2016
Location: Venezuela
Posts: 42
Member: 2557738
Status: Offline
Thanks Meter: 23
Donate money to this user
FRP done. Infinix Hot 20i

Work ID: 00000000018C538A
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E5
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Reading preloader...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 118000 Mb
eMMC Flash: .D6010341.33413434.3210DAD2.99235999
eMMC Flash: Unknown: A3A442
Internal RAM size: 232 Kb
External RAM size: 4096 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Error code: C002000C
Backup saved as __GENERAL RESET FRP METHODS_MTK GENERAL_06-12-2022_14-28-41.dump file
FRP lock is successfully reseted!
Performed by 2.2.1.0 Software version.
  Reply With Quote
The Following User Says Thank You to ebberfunky For This Useful Post:
Old 12-06-2022, 19:51   #7479 (permalink)
Major Poster
 
Join Date: Apr 2016
Location: Venezuela
Posts: 42
Member: 2557738
Status: Offline
Thanks Meter: 23
Donate money to this user
FRP done. Infinix Hot 20i

Work ID: 00000000018C538A
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E5
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Reading preloader...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 118000 Mb
eMMC Flash: .D6010341.33413434.3210DAD2.99235999
eMMC Flash: Unknown: A3A442
Internal RAM size: 232 Kb
External RAM size: 4096 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Error code: C002000C
Backup saved as __GENERAL RESET FRP METHODS_MTK GENERAL_06-12-2022_14-28-41.dump file
FRP lock is successfully reseted!
Performed by 2.2.1.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to ebberfunky For This Useful Post:
Old 12-07-2022, 11:21   #7480 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 212
Member: 2945914
Status: Offline
Thanks Meter: 257
samsung J730 frp removed

Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 2000*****
Work ID: FFFFFFFFFFFFFFFF
Searching for device. Please wait...
Waiting for device...
Found device on COM37
Reading info...
Detected device model: SM-J730F
HW Version: TIM
PDA version: J730FXXU2ARF2
CSC version: J730FTIM2ARF2
CP version: J730FXXU2ARF2
Device SN: R58K20XKJDZ
Device IMEI: 356204-09-******-*
Android version: 7.0
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 12-07-2022, 15:27   #7481 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 212
Member: 2945914
Status: Offline
Thanks Meter: 257
samsung s10plus frp removed

Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 2000*****
Work ID: 00000000018CA8C9
Searching for device. Please wait...
Waiting for device...
Found device on COM38
Reading info...
Detected device model: SM-G975U
HW Version: XAA
PDA version: G975USQU2ASGC
CSC version: G975UOYN2ASGC
CP version: G975USQU2ASGC
Device SN: R58M555K4MV
Device IMEI: 352695-10-******-*
Android version: 9
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 12-08-2022, 12:22   #7482 (permalink)
Freak Poster
 
Join Date: Nov 2016
Location: Plumtree, Zimbabwe
Posts: 163
Member: 2647569
Status: Offline
Thanks Meter: 92
Donate money to this user
Huawei Huawei Y9 (2019) FRP done
Quote:
Welcome to Octoplus FRP Tool v.2.2.3.0
Card S/N: 00013872
Platform: HUAWEI
Selected model: JKM-LX1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: JKM-LX1
SW version: JKM-LX1 9.1.0.373(C185E6R1P2)
Performed by 2.2.3.0 Software version.

Work ID: 0000000001952034
Platform: HUAWEI
Selected model: JKM-LX1
Searching for a phone. Please wait...
Found phone on COM14
Checking resource files...
Searching for a phone. Please wait...
Found phone on COM14
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: JKM-LX1
SW version: JKM-LX1 9.1.0.373(C185E6R1P2)
Authorizing...
Connecting to server..OK
Authorizing...OK
Calculating...
Writing partition slock ...
Authorization successfull.
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to gchipangura For This Useful Post:
Old 12-08-2022, 14:03   #7483 (permalink)
Freak Poster
 
Join Date: Jan 2020
Location: servis GENCI&GERI PG. AL
Posts: 212
Member: 2945914
Status: Offline
Thanks Meter: 257
gm5 frp removed

Work ID: 0000000001952B4F
Platform: GENERAL MOBILE
Selected model: GM5
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM76
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 007050E100000000
QC CPU: Snapdragon 410 MSM8916
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Checking request..
Reading partition...
Reading info...
Brand: gm
Platform: msm8916
Android version: 7.1.1
Display ID: NLC18D
Firmware version: 463
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as gm__08-12-2022_14-01-42.dump file
FRP lock is successfully reseted!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to Genci&Geri For This Useful Post:
Old 12-08-2022, 15:58   #7484 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,931
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,455
Wink SM-G955F Resetting FRP lock..ok

Work ID: 0000000001C1E40A
Searching for device. Please wait...
Waiting for device...
Found device on COM68
Reading info...
Detected device model: SM-G955F
HW Version: NEE
PDA version: G955FXXU4CRI5
CSC version: G955FOXM4CRI5
CP version: G955FXXU4CRI1
Device SN: R58J343CEVD
Device IMEI: 354358-08-362728-5
Android version: 8.0.0
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 12-08-2022, 16:02   #7485 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 3,931
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,455
Wink SM-G928F FRP lock is successfully reseted!

Work ID: 0000000001C1E40A
Platform: SAMSUNG
Selected model: SM-G928F
To put SM-G928F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface..
Found more then one box connected to COM23 COM23
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..

Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 2.2.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 03:46.



Powered by Searchlight © 2023 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2023 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2022 -
Page generated in 0.17502 seconds with 8 queries

SEO by vBSEO