🐙 Post here success Reset FRP story with Octoplus FRP Tool

[ahmadge]

Oscal c20 pro frp remove.
here logo
Platform: __GENERAL RESET FRP METHODS
Selected model: SC9863A SIGN V4
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading partition...
Reading info...
Searching for signatures...
Resetting FRP lock..
Backup saved as __GENERAL RESET FRP METHODS_SC9863A SIGN V4_21-05-2023_17-38-36.dump file
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version

{Ahmadge}.

[ahmadge]

here logo

Platform: __GENERAL RESET FRP METHODS
Selected model: SC9863A SIGN V4
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading partition...
Reading info...
Searching for signatures...
Resetting FRP lock..
Backup saved as __GENERAL RESET FRP METHODS_SC9863A SIGN V4_21-05-2023_17-38-36.dump file
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version

{Ahmadge}.

[Rui Romano]

Motorola xt1542 frp done

Work ID: 0000000001969AD8
Platform: MOTOROLA
Selected model: XT1541
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: EAAAANVZ
Firmware released date: Mar 13 2017
Firmware released time: 03:30:41
Firmware compiled date: Nov 22 2015
Firmware compiled time: 23:00:00
SW version: MPSS.DPM.2.0.2.c1.8-00044-M8936FAAAANUZM-1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Reading info...
Phone model: motorola MotoG3
SW version: MPIS24.107-55-2-17
Date: Thu Apr 6 10:09:16 CDT 2017
Android version: 6.0.1
Baseband M8916_2020632.44.03.21.54.01R OSPREY_EMEA_CUST
Detected phone model: XT1541
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 2.2.2.0 Software version.

Thanks Team

[faisal naeem]

INFINIX HOT 10 PLAY (X688B) User Lock Remove successfully performed by Octoplus FRP Tool

Platform: INFINIX
Selected model: X688B
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E5
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Reading preloader...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Prepairing Download Agent...
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC Flash: .15010044.48364441.4202BA98.CE5F18A3
eMMC Flash: Samsung: DH6DAB
Internal RAM size: 232 Kb
External RAM size: 4096 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Infinix
Manufacturer: INFINIX MOBILITY LIMITED
Model: Infinix X688B
Device: FULL-64
Platform: mt6765
Android version: 11
Display ID: INFINIX-R-64-220718V521
Factory Reset...
Method 2 ...
Switching to high-speed success!
Writing userdata...
Writing cache...
Factory Reset is successfully performed!
Performed by 2.2.8.0 Software version.

[qasir_amz]

Welcome to Octoplus FRP Tool v.2.2.8.0
Card S/N: 10000D873
Work ID: 0000000001FA9FD4
Platform: SAMSUNG
Selected model: SM-A107F
Please, power phone OFF and connect USB cable or connect phone in Download Mode or connect in BROM Mode via Test Point.
Searching for a phone. Please wait...
Found phone on COM11
Port name: MediaTek PreLoader USB VCOM (Android) (COM11)
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Brom Version: FF
Trying to crash...
Searching for a phone. Please wait...
Found phone on COM9
Port name: MediaTek USB Port (COM9)
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Brom Version: 05
Connecting...
Target Config: 00E5
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Reading preloader...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010051.5836334D.420075EF.9A2DB7F5
eMMC Flash: Samsung: QX63MB
Internal RAM size: 232 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: samsung
Manufacturer: samsung
Model: SM-A107F
Device: a10s
Platform: mt6765
Android version: 11
Display ID: RP1A.200720.012.A107FXXS8CVL1
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as samsung_SM-A107F_24-05-2023_15-55-09.dump file
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version.

[celulitico]

FRP SM-A032F BIT 2 WHIT EXIT

Work ID: 00000000
Platform: SAMSUNG
Selected model: SM-A032F
Searching for a phone. Please wait...
Found phone on COM51
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading partition...
Reading SUPER partition...
Reading info...
Brand: samsung
Manufacturer: samsung
Model: SM-A032F
Device: a3core
Platform: sp9863a
Android version: 12
Display ID: SP1A.210812.016.A032FXXU2BWC3
Searching for signatures...
Resetting FRP lock..
Backup saved as samsung_SM-A032F_24-05-2023_16-42-03.dump file
FRP lock is successfully reseted!
Performed by 2.2.7.0 Software versio

[genci titi 2002]

Work ID: 000000000197E733
Platform: PRESTIGIO
Selected model: PMT4137 4G
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM65
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading partition...
Reading info...
Searching for signatures...
Resetting FRP lock..
Backup saved as PRESTIGIO_PMT4137 4G_25-05-2023_08-56-02.dump file
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version.

[qasir_amz]

Welcome to Octoplus FRP Tool v.2.2.8.0
Card S/N: 10000D873
Work ID: 000000000198120A
Searching for device. Please wait...
Waiting for device...
Device was not found!
Performed by 2.2.8.0 Software version.

Work ID: 000000000198120A
Searching for device. Please wait...
Waiting for device...
Found device on COM92
Reading info...
Detected device model: SM-G9350
HW Version: TGY
PDA version: G9350ZHS5CTA1
CSC version: G9350ZZH5CTA1
CP version: G9350ZHS5CTA1
Device SN: R28H71RT1WR
Device IMEI: 356156-07-xxxxxxxxxx
Android version: 8.0.0
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Resetting FRP lock..
Perform factory reset to complete operation!
Performed by 2.2.8.0 Software version.

[ribbentrop]

Platform: __GENERAL RESET FRP METHODS
Selected model: QUALCOMM EDL AUTODETECT
Please, power phone OFF put the phone in EDL mode and connect USB cable.
Found phone on COM23
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: 111FE282
QC HW ID: 0014D0E100720000
QC CPU: Snapdragon 662 SDM662
QC HASH: C84AB3DAE9C6D18798A0583CB0A123680D3F0CFD9AD097982794DE95043D8A1A
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 287302274
Checking request..
Checking request..
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Redmi
Manufacturer: Xiaomi
Model: Lime for arm64
Device: qssi
Market name: lime
Platform: bengal
Android version: 10
Display ID: Android-Q-build-20210912205829
Rebooting phone
Performed by 2.2.7.0 Software version.

Work ID: 0000000001996152
Platform: __GENERAL RESET FRP METHODS
Selected model: QUALCOMM EDL AUTODETECT
Please, power phone OFF put the phone in EDL mode and connect USB cable.
Found phone on COM23
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: 111FE282
QC HW ID: 0014D0E100720000
QC CPU: Snapdragon 662 SDM662
QC HASH: C84AB3DAE9C6D18798A0583CB0A123680D3F0CFD9AD097982794DE95043D8A1A
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 287302274
Checking request..
Checking request..
Reading partition...
Reading SUPER partition...
Reading info...
Brand: Redmi
Manufacturer: Xiaomi
Model: Lime for arm64
Device: qssi
Market name: lime
Platform: bengal
Android version: 10
Display ID: Android-Q-build-20210912205829
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as Redmi_Lime for arm64_27-05-2023_20-43-31.dump file
FRP lock is successfully reseted!
Performed by 2.2.7.0 Software version.

So you can add this device in the list of supported devices via EDL mode

and Redmi 9T is lime, not davinci like mentioned in HELP page

[mekato]

Please add XT2095-1 using XT2095-2 method, pressing Vol- button. Log:

Work ID: 0000000001FE38D0
Platform: MOTOROLA
Selected model: XT2095-2
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 00E5
BootLoader Version: FE
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting...
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Target Config: 0000
Reading preloader...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.20
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Error code: C0010004
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010034.58364B4D.4203B60B.CAA918FD
eMMC Flash: Samsung: 4X6KMB
Internal RAM size: 232 Kb
External RAM size: 2048 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: motorola
Manufacturer: motorola
Model: moto e(7)
Device: malta
Platform: mt6765
Android version: 10
Display ID: QOFS30.569-83-18 release-keys
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Error code: C002000C
Backup saved as motorola_moto e(7)_30-05-2023_18-03-01.dump file
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version.

[faisal naeem]

HUAWEI D TAB BTV-DL09 | Docomo D TAB | D-01J | FRP Remove With Octoplus

Youtube Video Link : https://www.youtube.com/watch?v=e_FanoAnzmY&t=166s

Job ID: 00000000019B780C
2023-05-31 13:07:39
Starting Reset FRP
Selected phone model: ‪FIG-LA1‬
Searching Fastboot devices...
Found android device: DEK6R17B24003183
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
System: ‪BTV-DL09C100B311‬
Android Version: ‪7.0‬
C_Version: ‪C100‬
D_Version: ‪D001‬
Connecting to server...
Writing Reset FRP data...
Reset FRP done.
Performed by ‪1.3.3‬ Software version.

[genci titi 2002]

Work ID: 00000000019B8B62
Platform: SAMSUNG
Selected model: SM-J320FN
Reset FRP/ Reactivation lock operation for SM-J320FN will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J320FN into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 2.2.8.0 Software version.

[Genci&Geri]

Remove frp on BLU Studio View2019 with cpu spreadtrum.
Selected Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731E SIGN V5.


Work ID: 0000000001FE9EC1
Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731E SIGN V5
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM47
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading partition...
Reading info...
Brand: BLU
Manufacturer: BLU
Model: C6 2019
Device: C090EQ
Platform: sp7731e
Android version: 8.1.0
Display ID: BLU_C090EQ_V8.1.G.04.16_GENERIC_210820-1209
Searching for signatures...
Resetting FRP lock..
Backup saved as BLU_C6 2019_31-05-2023_17-05-56.dump file
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version.

[malka4u]

Platform: HUAWEI
Selected model: BG2-U01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: BG2-U01
Phone SN:
Phone IMEI:
SW version: BG2-U01C199B183
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version.


For enter fastboot follow this steps
power off
conect usb cable
wait red light turn on
as soon as red light turns off press volume down + power

need try many times but it work

[Genci&Geri]

Welcome to Octoplus FRP Tool v.2.2.8.0
Card S/N: 2000*****
Work ID: FFFFFFFFFFFFFFFF
Platform: WIKO
Selected model: SUNNY 2 PLUS
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM37
Port name: MediaTek PreLoader USB VCOM (Android) (COM37)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 0001
BootLoader Version: 01
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.0_PL, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A5C390.8A399523
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: WIKO
Manufacturer: WIKO
Model: Sunny2 Plus
Device: v2600cn
Platform: mt6580
Android version: 7.0
Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P144
Custom build version: Sunny2 Plus-V01.06.SWS.21-[Nougat-7.0]-V2600CN
Internal build version: V2600CN_7.0_WIK_SWS_FR_LOCK_06
Searching for signatures...
Resetting FRP lock..
Backup saved as WIKO_Sunny2 Plus_02-06-2023_10-29-04.dump file
FRP lock is successfully reseted!
Performed by 2.2.8.0 Software version.