GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 06-17-2018, 12:37   #871 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,202
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,714
Wink HUAWEI LUA-L21 FRP lock is successfully reseted


Platform: HUAWEI
Selected model: LUA-L21
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM48
Detecting Chip Version...
HW Chip: MT6735: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.4
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E31324D.4206F0DB.E06118D5
eMMC Flash: Samsung: FN12MB
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI LUA-L21
Device: HWLUA-L6735
Platform: mt6735m
Android version: 5.1
Display ID: LUA-L21C576B112
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_LUA-L21_17-06-2018_13-37-05.dump file
Performed by 1.3.0.2 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to genci titi 2002 For This Useful Post:
Old 06-17-2018, 12:44   #872 (permalink)
Freak Poster
 
Join Date: Jan 2007
Posts: 135
Member: 433038
Status: Offline
Thanks Meter: 89
Thumbs up Micromax Q417 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK GENERAL METHOD
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM28
Detecting Chip Version...
HW Chip: MT6737T: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473265.050705A8.F12C4B5B
eMMC Flash: Hynix: HAG2e
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15032 Mb
Internal RAM size: 128 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: Micromax
Model: Micromax Q417
Device: Q417
Platform: mt6735
Android version: 5.1
Display ID: MMX_Q417_SW_L100_HW_V1.0_20160107
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Micromax_Micromax Q417_17-06-2018_16-51-11.dump file
Performed by 1.3.0.0 Software version.
  Reply With Quote
The Following User Says Thank You to muskaangarg For This Useful Post:
Old 06-18-2018, 08:26   #873 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,202
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,714
Wink SM-G935FD FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.3.0.2
Platform: SAMSUNG
Selected model: SM-G935FD
To put SM-G935FD into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM13
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.3.0.2 Software version.
  Reply With Quote
The Following User Says Thank You to genci titi 2002 For This Useful Post:
Old 06-18-2018, 08:41   #874 (permalink)
No Life Poster
 
islamic.tj's Avatar
 
Join Date: Mar 2011
Location: Tadjikistan, Dushanbe
Age: 35
Posts: 552
Member: 1533366
Status: Offline
Thanks Meter: 131
Thumbs up Huawei LUA-U22 Reset FRP successfully done

Huawei LUA-U22 Reset FRP successfully done:

Code:
Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: HUAWEI
Selected model: LUA-U22
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.3.0.0 Software version.

Platform: HUAWEI
Selected model: LUA-U22
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM58
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.2
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.05075465.9145241B
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI LUA-U22
Device: HWLUA-U6582
Platform: mt6582
Android version: 5.1
Display ID: LUA-U22C479B006
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_LUA-U22_18-06-2018_12-33-18.dump file
Performed by 1.3.0.0 Software version.

Last edited by Octopus box; 06-18-2018 at 08:58.
  Reply With Quote
The Following User Says Thank You to islamic.tj For This Useful Post:
Old 06-18-2018, 11:31   #875 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,202
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,714
Wink BLACKVIEW A10 Reset FRP successfully done

Platform: BLACKVIEW
Selected model: A10
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM12
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .45010044.46343031.36011816.04BD84B1
eMMC Flash: Sandisk: DF4016
DA ver: 4.2.9C
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Blackview
Model: A10
Device: A10
Platform: mt6580
Android version: 7.0
Display ID: V3EG62A.JKE.HB.H.P3.1109.V3.04
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BLACKVIEW_A10_18-06-2018_12-30-24.dump file
Performed by 1.3.0.3 Software version.
  Reply With Quote
The Following User Says Thank You to genci titi 2002 For This Useful Post:
Old 06-18-2018, 11:45   #876 (permalink)
Freak Poster
 
Join Date: Aug 2009
Location: Algeria
Posts: 168
Member: 1106514
Status: Offline
Thanks Meter: 136
CONDOR T4-SP531 Reset FRP successfully done

  Reply With Quote
The Following User Says Thank You to soulay For This Useful Post:
Old 06-18-2018, 12:48   #877 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 358
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 173
Thumbs up LG M700A Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: LG
Selected model: M700A
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM18
Reading info...
Detected phone model: LG-M700A
Mode: Emergency
Initializing..
SW version: LGM700AAT-00-V10h-AME-XX-DEC-05-2017-32G+0
Android version: 7.1.1
Reset FRP operation for M700A will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formating encrypt section
Restoring loader...
Perform factory reset to complete operation!
  Reply With Quote
The Following User Says Thank You to wahiditunes For This Useful Post:
Old 06-18-2018, 16:31   #878 (permalink)
No Life Poster
 
islamic.tj's Avatar
 
Join Date: Mar 2011
Location: Tadjikistan, Dushanbe
Age: 35
Posts: 552
Member: 1533366
Status: Offline
Thanks Meter: 131
Thumbs up XIAOMI REDMI 4X - Mi Account Removed 100% worked ))

XIAOMI REDMI 4X - Mi Account Removed 100% worked ))

Quote:
Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.3.0.0 Software version.

Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.3.0.0 Software version.

Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4X
Device: santoni
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Resetting Mi Account...
Reading MI part...
Writing MI part...
Rebooting phone
Backup saved as XIAOMI_REDMI 4X_18-06-2018_20-25-44.dump file
Mi Account is successfully reseted!
Performed by 1.3.0.0 Software version.

Last edited by Octopus box; 06-18-2018 at 16:57.
  Reply With Quote
The Following User Says Thank You to islamic.tj For This Useful Post:
Old 06-18-2018, 18:48   #879 (permalink)
Junior Member
 
Join Date: Aug 2007
Posts: 3
Member: 576580
Status: Offline
Thanks Meter: 2
Thumbs up Reset FRP G928G via UART ( UFS CHIPS ) Versão Android 7.0 successfully done

Reset FRP G928G via UART ( UFS CHIPS ) Versão Android 7.0

Nivel patch segurança Androide 1 de Maio de 2018

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: SAMSUNG
Selected model: SM-G928G
To put SM-G928G into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.3.0.0 Software version.

Last edited by Octopus box; 06-18-2018 at 19:01.
  Reply With Quote
The Following User Says Thank You to val celular For This Useful Post:
Old 06-19-2018, 08:25   #880 (permalink)
Freak Poster
 
Join Date: Mar 2006
Posts: 190
Member: 242574
Status: Offline
Thanks Meter: 16
Thumbs up 🐙 HUAWEI TIT-L01 FRP reset done

Platform: _GENERAL RESET FRP METHODS
Selected model: MTK CUSTOM METHOD
Selected Download Agent: D:\DA_SWSEC_TIT_L01.bin
Please, power phone OFF (press and hold "Vol+"/"Vol-" button) and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM11
Detecting Chip Version...
HW Chip: MT6737T: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .11010030.31364733.3200FE34.AE0882BF
eMMC Flash: Toshiba: 016G32
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: HONOR
Model: TIT-L01
Device: HWTIT-L6735
Platform: mt6735
Android version: 5.1
Display ID: TIT-L01C479B111
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HONOR_TIT-L01_19-06-2018_15-15-07.dump file
Performed by 1.3.0.0 Software version.

Last edited by Octopus box; 06-19-2018 at 08:42.
  Reply With Quote
The Following User Says Thank You to parabelum For This Useful Post:
Old 06-19-2018, 09:08   #881 (permalink)
No Life Poster
 
islamic.tj's Avatar
 
Join Date: Mar 2011
Location: Tadjikistan, Dushanbe
Age: 35
Posts: 552
Member: 1533366
Status: Offline
Thanks Meter: 131
Thumbs up Samsung SM-A520F FRP successfully removed )

Samsung SM-A520F FRP removed )

Quote:
Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: SAMSUNG
Selected model: SM-A520F
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-A520F
Firmware compiled date: Tue Jan 2 18:15:59 KST 2018
PDA version: FA60_A520FXXU4ARA4
CSC version: unknown
SW version: A520FXXS4BQLE
Phone SN: R58J94ZJD9J
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7880
HW Modem: SHANNON325
Security patch level: 2016-12-01
Codename: a5y17ltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.3.0.0 Software version.

Last edited by Octopus box; 06-19-2018 at 09:20.
  Reply With Quote
The Following User Says Thank You to islamic.tj For This Useful Post:
Old 06-19-2018, 09:46   #882 (permalink)
No Life Poster
 
islamic.tj's Avatar
 
Join Date: Mar 2011
Location: Tadjikistan, Dushanbe
Age: 35
Posts: 552
Member: 1533366
Status: Offline
Thanks Meter: 131
Thumbs up LG H790 FRP Successfully Removed!!!

LG H790 FRP Successfully Removed!!!:

Quote:
Welcome to Octoplus/Octopus Box LG Software version 2.8.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM55
Selected model: H790
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable).
Reading info...Failed!
Could not detect mode!
Performed by 2.8.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM63
Selected model: H790
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable).
Reading info...
IMEI: ***********
Android version:
Battery level: 54%
SW Version: LGH790AT-00-V10f-NXS-XXX-OCT-0
Mode: Emergency
Initializing flash...OK
SW version: LGH790AT-00-V10f-NXS-XXX-OCT-03-2015-32G-MDA89E-
US
Android version: 6.0
LAF Version: 1.2
Product ID: PT02S150924002160
IMEI: ************
Target operator: GOOGLE
Hardware:
After performing Reset FRP operation the phone may stuck on logo. To fix
this problem You shall reflash the phone with the latest firmare.

Perform Reset FRP operation at your own risk. Continue?
Reading partitions...OK
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
If the phone hang on logo or is restarting afetr performing the operation,
please re-flash it using the same or higher version of firmware
Performed by 2.8.5 Software version.

Last edited by Octopus box; 06-19-2018 at 09:56.
  Reply With Quote
The Following User Says Thank You to islamic.tj For This Useful Post:
Old 06-19-2018, 10:51   #883 (permalink)
Product Supporter
 
Pijush Das's Avatar
 
Join Date: Mar 2013
Location: JTAG/eMMC/UFS
Posts: 892
Member: 1902789
Status: Offline
Thanks Meter: 1,101
Thumbs up 🐙 SAMSUNG SM-J701F/DS FRP Lock is Successfully Reseted

SAMSUNG SM-J701F/DS FRP Lock is Successfully Reseted


Last edited by Octopus box; 06-19-2018 at 11:09.
  Reply With Quote
The Following User Says Thank You to Pijush Das For This Useful Post:
Old 06-19-2018, 14:16   #884 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 358
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 173
Thumbs up Huawei LUA-U22 Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: HUAWEI
Selected model: LUA-U22
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM105
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.2
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .11010030.30384737.300095B7.92E1249F
eMMC Flash: Toshiba: 008G70
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI LUA-U22
Device: HWLUA-U6582
Platform: mt6582
Android version: 5.1
Display ID: LUA-U22C328B014
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_LUA-U22_19-06-2018_16-15-16.dump file
Performed by 1.3.0.0 Software version.

Last edited by Octopus box; 06-19-2018 at 14:23.
  Reply With Quote
The Following User Says Thank You to wahiditunes For This Useful Post:
Old 06-19-2018, 17:59   #885 (permalink)
No Life Poster
 
equinoks's Avatar
 
Join Date: Feb 2003
Location: In the dark side ;)
Age: 44
Posts: 2,317
Member: 21508
Status: Offline
Thanks Meter: 186
Thumbs up 🐙 LG H870 FRP successfully removed

it was on 8.0 after downgrading to 7.0 well done

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: LG
Selected model: H870
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM2406
Reading info...
Detected phone model: LG-H870
Mode: Emergency
Initializing..
SW version: LGH870AT-00-V10f-EUR-XX-APR-17-2017+0
Android version: 7.0
Reading partition...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.3.0.0 Software version.

Last edited by Octopus box; 06-20-2018 at 04:48.
  Reply With Quote
The Following User Says Thank You to equinoks For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 18:44.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.19221 seconds with 9 queries

SEO by vBSEO