GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 01-12-2018, 08:06   #91 (permalink)
Insane Poster
 
Join Date: Sep 2011
Location: Hajigonj Chandpur Bangladesh
Age: 33
Posts: 83
Member: 1663170
Status: Offline
Sonork: 100.1661551
Thanks Meter: 47
Huawei TRT-L21A Reset FRP successfully done


Platform: HUAWEI
Selected model: TRT-L21A
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: TRT-L21A
Phone SN: VWD7N17821002605
Phone IMEI: 864753037260998
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.0.9 Software version.

Last edited by Octopus box; 01-12-2018 at 09:39.
  Reply With Quote
The Following User Says Thank You to BrothersTelecom For This Useful Post:
Old 01-12-2018, 20:11   #92 (permalink)
No Life Poster
 
khalidsuper's Avatar
 
Join Date: Sep 2016
Location: living on the edge
Posts: 578
Member: 2620145
Status: Offline
Thanks Meter: 306
Thumbs up 🐙 Octoplus only click way and Reset FRP successfully done on SM-J500FN

Platform: SAMSUNG
Selected model: SM-J500FN
Reset FRP/ Reactivation lock operation for SM-J500FN will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Downloading resources...
All necessary resource files have been downloaded successfully.
Please put the phone into Download Mode and connect USB cable.
To put SM-J500FN into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.0.9 Software version.

Last edited by Octopus box; 01-13-2018 at 10:33.
  Reply With Quote
The Following User Says Thank You to khalidsuper For This Useful Post:
Old 01-13-2018, 07:58   #93 (permalink)
No Life Poster
 
UzUnlocker's Avatar
 
Join Date: Apr 2013
Location: Uzbekistan / Bukhara
Posts: 674
Member: 1912005
Status: Offline
Sonork: 100.1658592
Thanks Meter: 593
LG X220DS FRP Reseted Succesfully in a seconds!


Last edited by Octopus box; 01-13-2018 at 10:33.
  Reply With Quote
The Following User Says Thank You to UzUnlocker For This Useful Post:
Old 01-13-2018, 16:14   #94 (permalink)
Insane Poster
 
Join Date: Dec 2016
Location: world
Age: 24
Posts: 74
Member: 2664783
Status: Offline
Thanks Meter: 70
SM-G532F Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.0.5
Platform: SAMSUNG
Selected model: SM-G532F
Searching for a phone (waiting for ADB device)...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-G532F
Firmware compiled date: Wed Jul 19 15:59:19 KST 2017
PDA version: G532FXWU1AQG5
CSC version: G532FOJV1AQG5
SW version: G532FXXU1AQG5
Phone SN: RV8J524S5SD
Android version: 6.0.1 (MMB29T)
Sales code: THR
Country: IRAN
HW platform: mt6737t
HW Chip: MT6737T
HW Modem: MT6737T
Security patch level: 2017-07-01
Codename: grandpplteser
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.0.5 Software version.

Last edited by Octopus box; 01-13-2018 at 17:38.
  Reply With Quote
The Following User Says Thank You to LuffyStrawHat For This Useful Post:
Old 01-13-2018, 16:31   #95 (permalink)
Crazy Poster
 
Join Date: Dec 2017
Posts: 59
Member: 2786480
Status: Offline
Thanks Meter: 14
Thumbs up 🐙 SM-J710F Reset FRP done without lost data

Welcome to Octoplus FRP Tool v.1.0.9
Platform: SAMSUNG
Selected model: SM-J710F
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 1.0.9 Software version.

Platform: SAMSUNG
Selected model: SM-J710F
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP lock is successfully reseted!
Performed by 1.0.9 Software version.

Last edited by Octopus box; 01-13-2018 at 17:38.
  Reply With Quote
The Following 2 Users Say Thank You to kkkd22 For This Useful Post:
Old 01-13-2018, 16:40   #96 (permalink)
Crazy Poster
 
Join Date: Dec 2017
Posts: 59
Member: 2786480
Status: Offline
Thanks Meter: 14
Thumbs up 🐙 Lenovo K53A48 Reset FRP successfully done

Platform: LENOVO
Selected model: K53A48
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM148
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Searching for signatures...
Resetting FRP lock..
Rebooting phone
Backup saved as LENOVO_K53A48_10-01-2018_17-49-30.dump file
FRP lock is successfully reseted!
Performed by 1.0.8 Software version.

Last edited by Octopus box; 01-13-2018 at 17:40.
  Reply With Quote
The Following User Says Thank You to kkkd22 For This Useful Post:
Old 01-13-2018, 18:13   #97 (permalink)
No Life Poster
 
ThePhoneTechDoc's Avatar
 
Join Date: Jan 2017
Location: Jamaica
Posts: 717
Member: 2673816
Status: Offline
Thanks Meter: 606
Smile 🐙 Samsung SM-J320FN Reset FRP done 100%

Welcome to Octoplus FRP Tool v.1.0.9
Platform: SAMSUNG
Selected model: SM-J320FN
Reset FRP/ Reactivation lock operation for SM-J320FN will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J320FN into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.0.9 Software version.

Last edited by Octopus box; 01-13-2018 at 18:23.
  Reply With Quote
The Following User Says Thank You to ThePhoneTechDoc For This Useful Post:
Old 01-13-2018, 22:05   #98 (permalink)
No Life Poster
 
khalidsuper's Avatar
 
Join Date: Sep 2016
Location: living on the edge
Posts: 578
Member: 2620145
Status: Offline
Thanks Meter: 306
Thumbs up 🐙 Done Reset FRP lock UART method only change sboot file ver.7.00

Platform: SAMSUNG
Selected model: SM-T580
Searching for UART interface.. COM9
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM9
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP lock is successfully reseted!
Performed by 1.0.9 Software version.

tanx octoplus

Last edited by Octopus box; 01-14-2018 at 08:55.
  Reply With Quote
The Following User Says Thank You to khalidsuper For This Useful Post:
Old 01-14-2018, 12:40   #99 (permalink)
Major Poster
 
Join Date: Aug 2016
Location: GSMFORUM
Posts: 45
Member: 2614153
Status: Offline
Thanks Meter: 23
Thumbs up 🐙 Samsung SM-G610F Reset FRP successfully done by Octoplus FRP Tool



BR
IUNLOCKINGSTORE

Last edited by Octopus box; 01-15-2018 at 06:52.
  Reply With Quote
The Following 2 Users Say Thank You to .::Deep::. For This Useful Post:
Old 01-14-2018, 12:41   #100 (permalink)
Major Poster
 
Join Date: Aug 2016
Location: GSMFORUM
Posts: 45
Member: 2614153
Status: Offline
Thanks Meter: 23
Thumbs up 🐙 Asus_x008da FRP Reset done with single click by Octoplus FRP Tool



BR
IUNLOCKINGSTORE

Last edited by Octopus box; 01-15-2018 at 06:55.
  Reply With Quote
The Following User Says Thank You to .::Deep::. For This Useful Post:
Old 01-14-2018, 17:08   #101 (permalink)
No Life Poster
 
bencharqui1's Avatar
 
Join Date: Aug 2011
Location: Algeria is a North African
Posts: 1,795
Member: 1629321
Status: Offline
Thanks Meter: 788
Iris Vox 4 Plus (MT6735) Reset FRP successfully done

Iris Vox 4 Plus (MT6735) Reset FRP log:



[QUOTEWelcome to Octoplus FRP Tool v.1.0.9
Platform: CONDOR
Selected model: PGN-528
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM5
Detecting Chip Version...
HW Chip: MT6735: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.0507517A.6AE6B9A3
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Searching for signatures...
Resetting FRP lock..
Backup saved as CONDOR_PGN-528_14-01-2018_17-05-44.dump file
FRP lock is successfully reseted!
Performed by 1.0.9 Software version.][/QUOTE]

Last edited by Octopus box; 01-15-2018 at 06:53.
  Reply With Quote
The Following User Says Thank You to bencharqui1 For This Useful Post:
Old 01-14-2018, 19:40   #102 (permalink)
No Life Poster
 
khalidsuper's Avatar
 
Join Date: Sep 2016
Location: living on the edge
Posts: 578
Member: 2620145
Status: Offline
Thanks Meter: 306
Thumbs up 🐙 Samsung SM-N950F Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.0.9
Platform: SAMSUNG
Selected model: SM-N950F
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-N950F
Firmware compiled date: Mon Aug 14 21:44:04 KST 2017
PDA version: N950FXXU1AQH9
CSC version: N950FOXM1AQH9
SW version: N950FXXU1AQH9
Phone SN: R58J935NGRA
Android version: 7.1.1 (NMF26X)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8895
HW Modem: SHANNON355
Security patch level: 2017-08-01
Codename: greatltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.0.9 Software version.

Last edited by Octopus box; 01-15-2018 at 07:02.
  Reply With Quote
The Following 2 Users Say Thank You to khalidsuper For This Useful Post:
Old 01-15-2018, 06:38   #103 (permalink)
Freak Poster
 
Join Date: Apr 2009
Location: Dingle, Iloilo, Philippines
Posts: 267
Member: 1019612
Status: Offline
Thanks Meter: 93
Thumbs up 🐙 Cherry Mobile J2 v2 FRP Reset Successfully Done via Octoplus FRP Tool

Cherry Mobile J2 v2 FRP Reset Done via FRP Tool using ZTE A452 model


Welcome to Octoplus FRP Tool v.1.0.9
Platform: ZTE
Selected model: A452
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM5
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .F4012242.6977696E.20100000.69009301
eMMC Flash: Unknown: Biwin
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7376 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Searching for signatures...
Resetting FRP lock..
Backup saved as ZTE_A452_15-01-2018_13-28-31.dump file
FRP lock is successfully reseted!
Performed by 1.0.9 Software version.

Last edited by Octopus box; 01-15-2018 at 07:04.
  Reply With Quote
The Following User Says Thank You to icecube1982 For This Useful Post:
Old 01-16-2018, 19:13   #104 (permalink)
No Life Poster
 
Join Date: Jul 2011
Location: montreal
Posts: 1,040
Member: 1612872
Status: Offline
Sonork: 1613495
Thanks Meter: 174
Thumbs up 🐙 Successfully reseted FRP locks on Samsung S8 SM-G950U

Welcome to Octoplus FRP Tool v.1.0.7
Platform: SAMSUNG
Selected model: SM-G950U
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-G950U
Firmware compiled date: Fri Nov 10 11:30:26 KST 2017
PDA version: FA70_G950USQU2AQK2
CSC version: unknown
SW version: G950USQU1AQK1
Phone SN: R28J50J2TKA
Android version: 7.0 (NRD90M)
Sales code: unknown
Country: unknown
HW platform: msm8998
HW Chip: MSM8998
HW Modem: MSM8998
Security patch level: 2017-02-01
Codename: dreamqltesq
Performed by 1.0.7 Software version.

Platform: SAMSUNG
Selected model: SM-G950U
Searching for a phone (waiting for ADB device)...
Reading info...
Proper android device not found. Make shure that "USB debug" option on the device is turned on.
Please, press "OK" button on the phone to allow USB debugging..
Proper android device not found. Make shure that "USB debug" option on the device is turned on.
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.0.7 Software version.

Last edited by Octopus box; 01-16-2018 at 19:41.
  Reply With Quote
The Following 2 Users Say Thank You to katitous For This Useful Post:
Old 01-17-2018, 11:01   #105 (permalink)
No Life Poster
 
Join Date: May 2009
Posts: 1,093
Member: 1043111
Status: Offline
Sonork: 1000.2
Thanks Meter: 377
Lenovo K53A48 Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.0.9
Platform: LENOVO
Selected model: K53A48
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.0.9 Software version.

Platform: LENOVO
Selected model: K53A48
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM607
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Searching for signatures...
Resetting FRP lock..
Rebooting phone
Backup saved as LENOVO_K53A48_17-01-2018_16-59-23.dump file
FRP lock is successfully reseted!
Performed by 1.0.9 Software version.
  Reply With Quote
The Following User Says Thank You to wsmobile For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 23:09.



Powered by Searchlight © 2023 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2023 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2022 -
Page generated in 0.28031 seconds with 8 queries

SEO by vBSEO