The problem with Redmi Note 7 after Mi acc delete [Answered] - GSM-Forum

ribbentrop · 03-09-2023, 11:16

Phone freezes with MIUI word on the screen, firmware writing and hard reset don't help also. All logs are fine, without any errors.
Mb some modification of rawprogram are req?

Code:

Work ID: 0000000001B57DA6
Platform: XIAOMI
Selected model: REDMI NOTE 7
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM13
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0008C0E100000000
QC CPU: Snapdragon 660 SDM660
QC SW VER: 00000004
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 0
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Manufacturer: Xiaomi
Model: Redmi Note 7
Device: lavender
Platform: sdm660
Android version: 10
Display ID: QKQ1.190910.002 V12.5.1.0.QFGMIXM
Writing firmware...
Selected firmware files:
O:\note7\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global_cb25bd0d3f\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global\images\rawprogram0.xml
O:\note7\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global_cb25bd0d3f\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global\images\patch0.xml
Opening "O:\note7\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global_cb25bd0d3f\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global\images\rawprogram0.xml"...
Writing vbmeta...
Writing vbmetabak...
Writing storsec...
Writing storsecbak...
Writing rpm...
Writing rpmbak...
Writing hyp...
Writing hypbak...
Writing pmic...
Writing pmicbak...
Writing cmnlib...
Writing cmnlibbak...
Writing cmnlib64...
Writing cmnlib64bak...
Writing abl...
Writing ablbak...
Writing devcfgbak...
Writing devcfg...
Writing tz...
Writing tzbak...
Writing mdtpsecapp...
Writing mdtpsecappbak...
Writing keymaster...
Writing keymasterbak...
Writing bluetooth...
Writing xbl...
Writing xblbak...
Writing dsp...
Writing mdtp...
Writing splash...
Writing modem...
Writing boot...
Writing recovery...
Writing cache...
Writing system...
Writing vendor...
Writing cust...
Writing userdata...
Writing PrimaryGPT...
Writing BackupGPT...
Opening "O:\note7\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global_cb25bd0d3f\lavender_global_images_V12.0.1.0.QFGMIXM_20201023.0000.00_10.0_global\images\patch0.xml"...
Writing Patch...
Firmware Write successfully.
Performed by 2.2.6.0 Software version.

Octopus box · 03-09-2023, 11:34

Hello.

Thanks for the report, we will check where can be the problem then inform you.

ribbentrop · 03-09-2023, 12:05

Quote:

Originally Posted by Octopus box

Hello.

Thanks for the report, we will check where can be the problem then inform you.

phone is alive now after persist writing, but problem with Mi acc deleting still exist

ribbentrop · 03-09-2023, 12:39

Done with 2.0.8.0 software version

Code:

Welcome to Octoplus FRP Tool v.2.0.8.0
Card S/N: 1000034A9
Work ID: 00000000018F2F92
Platform: XIAOMI
Selected model: REDMI NOTE 7
Put the phone into EDL mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Found phone on COM13
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0008C0E100000000
QC CPU: Snapdragon 660 SDM660
QC SW VER: 00000004
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 268436480
Checking request..
Reading partition...
Reading info...
Android version: 10
Display ID: QKQ1.190910.002 V12.0.1.0.QFGMIXM
Firmware version: V12.0.1.0.QFGMIXM
Resetting Mi Account...
Reading MI part...
Writing MI part...
Reading MI2 part ...
Writing MI2 part...
Mi Account is successfully reseted!
Performed by 2.0.8.0 Software version.

03-09-2023, 11:34	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,813 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	Hello. Thanks for the report, we will check where can be the problem then inform you.