Xiaomi Redmi S2 Operation was failed! [Solved] - GSM-Forum

trenac · 05-11-2022, 11:16

i try to reset frp but operation failed here is log

Work ID: 0000000001BDFA4B
Platform: XIAOMI
Selected model: REDMI S2
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM13
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Operation was failed!
Performed by 2.1.3.0 Software version.

Octopus support · 05-11-2022, 11:48

Hello

What's the state of phone right now?

Also, what operation did you perform?

trenac · 05-11-2022, 11:51

phone was locked to gmail account i neeed to reset frp

trenac · 05-11-2022, 12:03

phone was hard reset by customer and now its locked to gmail account

Octopus support · 05-11-2022, 12:05

Try to perform operation once again, then post here result.

If you connect your phone to a TP, you need to release the TP after the computer detects the phone in 9008 mode.

If the TP still not released, the processor does not see the phone's flash drive.

trenac · 05-11-2022, 12:11

its ok phone was done with another test point not from your help here is log
Platform: XIAOMI
Selected model: REDMI S2
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM13
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
QC SW VER: 00000001
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi S2
Device: ysl
Android version: 8.1.0
Display ID: OPM1.171019.011
Firmware version: V10.3.1.0.OEFMIXM
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as xiaomi_Redmi S2_11-05-2022_13-07-57.dump file
FRP lock is successfully reseted!
Performed by 2.1.3.0 Software version.

trenac · 05-11-2022, 12:15

xerraco · 05-16-2022, 02:06

Quote:

Originally Posted by trenac

Whats this? Nothing appear on my PC...

Br,
xerraco

05-11-2022, 11:16	#1 (permalink)
trenac No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49 Posts: 1,741 Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316	Xiaomi Redmi S2 Operation was failed! [Solved] i try to reset frp but operation failed here is log Work ID: 0000000001BDFA4B Platform: XIAOMI Selected model: REDMI S2 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM13 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000460E100000000 QC CPU: Snapdragon 625 MSM8953 QC SW VER: 00000001 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Operation was failed! Performed by 2.1.3.0 Software version.

05-11-2022, 11:48	#2 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,159 Member: 2891705 Status: Offline Thanks Meter: 2,141	Hello What's the state of phone right now? Also, what operation did you perform?

05-11-2022, 11:51	#3 (permalink)
trenac No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49 Posts: 1,741 Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316	phone was locked to gmail account i neeed to reset frp

05-11-2022, 12:03	#4 (permalink)
trenac No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49 Posts: 1,741 Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316	phone was hard reset by customer and now its locked to gmail account

05-11-2022, 12:05	#5 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,159 Member: 2891705 Status: Offline Thanks Meter: 2,141	Try to perform operation once again, then post here result. If you connect your phone to a TP, you need to release the TP after the computer detects the phone in 9008 mode. If the TP still not released, the processor does not see the phone's flash drive.

05-11-2022, 12:11	#6 (permalink)
trenac No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49 Posts: 1,741 Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316	its ok phone was done with another test point not from your help here is log Platform: XIAOMI Selected model: REDMI S2 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM13 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000460E100000000 QC CPU: Snapdragon 625 MSM8953 QC SW VER: 00000001 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: xiaomi Model: Redmi S2 Device: ysl Android version: 8.1.0 Display ID: OPM1.171019.011 Firmware version: V10.3.1.0.OEFMIXM Resetting FRP lock.. Searching for signatures... Rebooting phone Backup saved as xiaomi_Redmi S2_11-05-2022_13-07-57.dump file FRP lock is successfully reseted! Performed by 2.1.3.0 Software version.

05-11-2022, 12:15	#7 (permalink)
trenac No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49 Posts: 1,741 Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316