BAH2-W19 FRP removed with octoplus huawei tool

[Pastime_GSM]

selecting BAH-W09

Welcome to Octoplus Huawei Software v.‪1.2.2.1‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM209 RIM Virtual Serial Port v2
2: COM210 RIM Virtual Serial Port v2

2020-10-14 14:15:24 GMT -------------------------------------------------
Starting Read Info (Fastboot Mode)
Searching Fastboot devices...
Found a fastboot device: 2DKNU18B17101024
Product Model: ‪BAH2-W19‬
IMEI A: ‪2DKNU18B1710102‬
S/N: ‪2DKNU18B17101024‬
Build Number: ‪BAH2-W19 8.0.0.177(C432)‬
Region Code: C432
Region: Europe
Android Version: ‪8.0.0‬
C_Version: ‪C432‬
D_Version: ‪D001‬
DeviceName: ‪BAH2-W‬

Read Info (Fastboot Mode) done.
Performed by ‪1.2.2.1‬ Software version.

2020-10-14 14:15:45 GMT -------------------------------------------------
Starting Reset FRP (Fastboot Mode)
Searching Fastboot devices...
Found a fastboot device: 2DKNU18B17101024

Device Model: ‪BAH2-W19‬
System: ‪BAH2-W19 8.0.0.177(C432)‬
IMEI A: ‪2DKNU18B1710102‬
S/N: ‪2DKNU18B17101024‬
Connecting to server...
Writing Reset FRP data...

Reset FRP (Fastboot Mode) done.
Performed by ‪1.2.2.1‬ Software version.

[kgste]

Hi,

i confirm, it's work fine.
thank you