BGO-LD09 frp done
 

Welcome to Octoplus Huawei Software v.‪1.2.1‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM27 USB Serial Port

2020-09-14 14:36:30 GMT -------------------------------------------------
Starting Reset FRP (ADB Interface)

Reset FRP (ADB Interface) is not supported for this device.
Performed by ‪1.2.1‬ Software version.

2020-09-14 14:36:55 GMT -------------------------------------------------
Starting Reset FRP (ADB Interface)

Reset FRP (ADB Interface) is not supported for this device.
Performed by ‪1.2.1‬ Software version.

2020-09-14 14:37:01 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪BGO-DL09‬

Connect is not supported for this device.
Performed by ‪1.2.1‬ Software version.

2020-09-14 14:37:16 GMT -------------------------------------------------
Starting Auto detect
No devices in manufacture mode detected

Auto detect failed.
Performed by ‪1.2.1‬ Software version.

Found COM ports:
1: COM1 Communications Port
2: COM27 USB Serial Port

2020-09-14 14:37:35 GMT -------------------------------------------------
Starting Reset FRP (ADB Interface)

Reset FRP (ADB Interface) is not supported for this device.
Performed by ‪1.2.1‬ Software version.

2020-09-14 14:38:06 GMT -------------------------------------------------
Starting Reset FRP (Fastboot Mode)
Searching Fastboot devices...
Found a fastboot device: 8QKDU17921002111
System: ‪escue:BGO-DL09C199B006‬
Connecting to server...
Writing Reset FRP data...

Reset FRP (Fastboot Mode) done.
Performed by ‪1.2.1‬ Software version.