CDY-NX9B Reset Huawei ID [Answered]

[baloy07]

CDY-NX9B Reset Huawei ID, complete operation but still Huawei ID

Welcome to Octoplus Huawei Software v.‪1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM32 USB Serial Port

Job ID: 0000000001A9B054
2023-02-06 04:55:25
Starting Reset Huawei ID
Selected phone model: ‪CDY-NX9‬
Selected method: Reset Huawei Id (EMUI12/Harmony)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN820_985_V4...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Writing ‪BL2‬ partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 0123456789ABCDEF
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪CDY-NX9B‬
System: ‪CDY-N29B 12.0.0.296(C636E3R2P4)‬
Android Version: ‪10‬
Base Version: ‪CDY-LGRP2-OVS 102.0.0.296‬
Custom Version: ‪CDY-N29B-CUST 102.0.0.3(C636)‬
Preload Version: ‪CDY-N29B-PRELOAD 102.0.0.4(C636R2)‬
C_Version: ‪C636‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪CDY-NX9B‬
System: ‪CDY-N29B 12.0.0.296(C636E3R2P4)‬
MEID: ‪A00000BACE4ADE‬
IMEI A: ‪860142044584091‬
IMEI B: ‪860142044614104‬
Writing secure data...
Resetting Huawei ID...
Reset Huawei ID done.
Performed by ‪1.3.3‬ Software version.

[Octopus support]

Hello

As we can see from software log, your device has too high security level.

You need to downgrade device firnware to 220 via factory mode.

Unfortunately, we do not have firmware for your device.