ane-al00 fastboot write failed [Answered]

[ethhab]

phone comes usb com 1 dead
flashed wrong file another shop

Welcome to Octoplus Huawei Software v.‪1.2.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM151 USB Serial Port

Job ID: 000000000073D139
2021-01-20 14:32:25 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ANE-AL00
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN659_A8.0_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Error: Failed write ‪FASTBOOT‬ partition

ON/OFF Factory Mode failed.
Performed by ‪1.2.3‬ Software version.

Job ID: 000000000073D1AC
2021-01-20 14:33:33 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪ANE-AL00‬
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN659_A8.0_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Error: Failed write ‪FASTBOOT‬ partition

Connect failed.
Performed by ‪1.2.3‬ Software version.

i test with tespoint also it is the same

[Octopus support]

Hello.

Please take out the battery and repeat operation once again, post here results.