:::H30-U10 imwi repier error::: [Answered]
 

Welcome to Octoplus Huawei Software v.‪1.0.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM8 USB Serial Port

2019-02-04 08:46:14 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪MTK Android Device‬
Searching MTK Debug devices
Please "Power Off" the device and connect USB cable
Switching device to MTK Debug mode
Waiting for device loading
BaseBand chip: MT6582,S01
S/W version: ALPS.KK1.MP1.V2.42
H/W board version: S01
Error: General error.
BaseBand chip: ‪MT6582, E01‬
S/W version: ‪MOLY.WR8.W1315.MD.WG.MP.V37.P9‬
H/W board version: ‪HUAWEI82_CWET_KK_HSPA_HW‬
IMEI A: ‪FFFFFFFFFFFFFFF‬
IMEI B: ‪FFFFFFFFFFFFFFF‬

Connect done.
Performed by ‪1.0.5‬ Software version.

2019-02-04 08:47:06 GMT -------------------------------------------------
Starting Repair Info
New IMEI A: ‪111111111111119‬
New IMEI B: ‪111111111111119‬
Reading secure data...

Repair Info failed.
Performed by ‪1.0.5‬ Software version.

Hello.

Unfortunately, this phone model H30-U10 isn't supported, but we have ordered that device, we will add support for this model in future updates.