| Moh3en.pc | 05-01-2021 15:54 |
HUAWEI ALE-L21 Direct Unlock done.
Code:
Welcome to Octoplus Huawei Software v.1.2.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM28 Android Adapter PCUI
2: COM30 DBAdapter Reserved Interface
3: COM1 Communications Port
4: COM29 Android Adapter Modem
2021-05-01 14:52:36 GMT -------------------------------------------------
Starting Connect
Selected phone model: ALE-L21
Detected Android Adapter PCUI port
Warning: Can't get device model.
Connecting to server...
Authorization is successful
Reading basic data...
Warning: Can't get device model.
Reading secure data...
Warning: Can't get phone MEID.
Device Model: Huawei HiSilicon Device
Firmware: ALE-L21 C185B130CUSTC185D001
Boot: DailyBuild_201508312343_BOOT
Fastboot: DailyBuild_201508312343_FASTBOOT
System: ALE-L21C185B130_SYSTEM
Recovery: (unknow)
IMEI A:
IMEI B:
Bluetooth MAC: B8:BC:1B:1E:96:58
WiFi MAC: B8:BC:1B:1E:9B:91
S/N: N2K7N15516000260
Board S/N: 7N3DBH154M044577
Vendor Code: hw
Country Code: meafnaf
Connect done.
Performed by 1.2.5 Software version.
2021-05-01 14:52:50 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ALE-L21
Reading basic data...
Warning: Can't get device model.
Reading secure data...
Warning: Can't get phone MEID.
Writing public keys...
Identifying security...
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot
Direct Unlock done.
Performed by 1.2.5 Software version.
| 