HUAWEI AMN-LX9 Repair Info done.

[Moh3en.pc]

Welcome to Octoplus Huawei Software v.‪1.2.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2021-04-24 08:10:22 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪AMN-LX9‬
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected ‪MediaTek USB Port‬ port

Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Brom Version: 5
Boot Loader Version: FE
Initializing remote service connection...
Downloading Authentication Data...
Sending Authentication Data...
Initializing remote service connection...
Downloading Download Agent data...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent.
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing remote service connection...
Downloading preloader data...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
IMEI A: ‪865
IMEI B: ‪865

Connect done.
Performed by ‪1.2.5‬ Software version.
2021-04-24 08:11:22 GMT -------------------------------------------------
Starting Repair Info
Selected phone model: ‪AMN-LX9‬
New IMEI A: ‪862
New IMEI B: ‪862
Creating partition backup: ‪AMN-LX9_nvram_2021-04-24_12-41-23.bin‬
Repairing Imei A...
Repairing Imei B...
Writing secure data...
Please perform a Factory Data Reset of your device manually through Recovery mode.

Repair Info done.
Performed by ‪1.2.5‬ Software version.