|
huawei honor 8a jat-l29 recived dead [Solved] huawei honor 8a jat-l29 recived dead histroy some one try to remove frp and **** this devices i will write firmware form support but error on system but phone alive but reboot to recovery now i will flash sd card and upgrade mode but fail to flash all files write c185 c432 c431 c636 c55 but not write any file i also write board firmware still same not write any firmware |
team please fix this issue |
Hello. Plesae, post here full Software log or send us log files with these performed operations |
i have same proplem now after flash reboot to recovery if team have full backup to try it or oeminfo backup Welcome to Octoplus Huawei Software v.1.1.6.1 To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: *#*#2846579#*#* ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: *#*#14789632#*#* ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' Found COM ports: 1: COM1 Communications Port 2: COM6 USB Serial Port Selected scatter file: H:/Huwei/jAT-L29/JAT_L29/Jakarta-L29A 9.0.1.183(C432E5R2P1)/Android_scatter.txt 2020-04-27 11:39:33 GMT ------------------------------------------------- Starting Read Scatter File Scatter file parsing finished. Read Scatter File done. Performed by 1.1.6.1 Software version. Selected DA file: H:/Huwei/jAT-L29/JAT_L29/Jakarta-L29A 9.0.1.183(C432E5R2P1)/preloader_k62v1_64_mexico.bin Selected DA file: H:/Huwei/jAT-L29/JAT_L29/Jakarta-L29A 9.0.1.183(C432E5R2P1)/MTK_AllInOne_DA.bin 2020-04-27 11:39:41 GMT ------------------------------------------------- Starting Write Firmware(MTK) Please Power off the phone, attach Test Point and insert USB cable MediaTek USB Port is not found Write Firmware(MTK) failed. Performed by 1.1.6.1 Software version. 2020-04-27 11:40:05 GMT ------------------------------------------------- Starting Write Firmware(MTK) Please Power off the phone, attach Test Point and insert USB cable MediaTek USB Port is not found Write Firmware(MTK) failed. Performed by 1.1.6.1 Software version. 2020-04-27 11:46:45 GMT ------------------------------------------------- Starting Write Firmware(MTK) Please Power off the phone, attach Test Point and insert USB cable MediaTek USB Port is not found Write Firmware(MTK) failed. Performed by 1.1.6.1 Software version. 2020-04-27 11:47:08 GMT ------------------------------------------------- Starting Write Firmware(MTK) Please Power off the phone, attach Test Point and insert USB cable MediaTek USB Port is not found Write Firmware(MTK) failed. Performed by 1.1.6.1 Software version. 2020-04-27 11:47:35 GMT ------------------------------------------------- Starting Write Firmware(MTK) Please Power off the phone, attach Test Point and insert USB cable Detecting Chip Version... HW Chip : MT6765 HW Version : 8A00.CA00.0000.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 16 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 29820 Mb Reading Partition Table Scatter file parsing finished. Authentication partition preloader... Writing partition preloader... Done. Writing partition preloader_backup... Done. Writing partition spmfw... Done. Writing partition scp1... Done. Writing partition sspm_1... Done. Writing partition cache... Done. Writing partition erecovery_vbmeta... Done. Writing partition vbmeta... Done. Writing partition lk... Done. Writing partition tee1... Done. Writing partition md1img... Done. Writing partition recovery_ramdisk... Done. Writing partition recovery_vendor... Done. Writing partition erecovery_kernel... Done. Writing partition erecovery_ramdisk... Done. Writing partition erecovery_vendor... Done. Writing partition dtbo... Done. Writing partition boot... Done. Writing partition eng_vendor... Done. Writing partition eng_system... Done. Writing partition odm... Done. Writing partition vendor... Done. Writing partition cust... Done. Writing partition product... Done. Writing partition system... Done. Writing partition preload... Done. Writing partition userdata... Done. Write Firmware(MTK) done. Performed by 1.1.6.1 Software version. Sending an authorization request... Analyzing Smart Card... Authorized. 2020-04-27 12:03:44 GMT ------------------------------------------------- Starting Connect Selected phone model: JAT-L29 Please Power off the phone, attach Test Point and insert USB cable Detecting Chip Version... HW Chip : MT6765 HW Version : 8A00.CA00.0000.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 16 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 29820 Mb Error: File not found in target partition Connect failed. Performed by 1.1.6.1 Software version. 2020-04-27 12:04:14 GMT ------------------------------------------------- Starting Connect Selected phone model: JAT-L29 Please Power off the phone, attach Test Point and insert USB cable Canceling... Please be patient! Error: Auto Boot Flash Tool Try to "Power ON" / "Power OFF" device and perform operation again Connect failed. Performed by 1.1.6.1 Software version. 2020-04-27 12:11:30 GMT ------------------------------------------------- Starting Write Firmware(MTK) Please Power off the phone, attach Test Point and insert USB cable Detecting Chip Version... HW Chip : MT6765 HW Version : 8A00.CA00.0000.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 16 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 29820 Mb Reading Partition Table Scatter file parsing finished. Authentication partition preloader... Writing partition preloader... Done. Writing partition preloader_backup... Done. Writing partition spmfw... Done. Writing partition scp1... Done. Writing partition sspm_1... Done. Writing partition cache... Done. Writing partition erecovery_vbmeta... Done. Writing partition vbmeta... Done. Writing partition lk... Done. Writing partition tee1... Done. Writing partition md1img... Done. Writing partition recovery_ramdisk... Done. Writing partition recovery_vendor... Done. Writing partition erecovery_kernel... Done. Writing partition erecovery_ramdisk... Done. Writing partition erecovery_vendor... Done. Writing partition dtbo... Done. Writing partition boot... Done. Writing partition eng_vendor... Done. Writing partition eng_system... Done. Writing partition odm... Done. Writing partition vendor... Done. Writing partition cust... Done. Writing partition product... Done. Writing partition system... Done. Writing partition preload... Done. Writing partition userdata... Done. Write Firmware(MTK) done. Performed by 1.1.6.1 Software version. 2020-04-27 12:15:09 GMT ------------------------------------------------- Starting Connect Selected phone model: JAT-L29 Please Power off the phone, attach Test Point and insert USB cable MediaTek USB Port is not found Connect failed. Performed by 1.1.6.1 Software version. |
@mh mobile Don't write every single firmware, first read out firmware version and name, after try to reflash your device with same or higher firmware file. @melmitador If You've recover your device, but phone still not power on correctly, most likely there are some damaged partitions, the backup for this device are available at the Support Area. You can try ro write it, but at your own risk |
Quote:
|
thanks team after write full backup all fix and mobile work |
bro u write backup from where ? from other working device or wat |
can write oeminf file |
| All times are GMT +1. The time now is 19:56. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -