Huawei Y6 Prime 2019 MRD-LX1F frp done test point - GSM-Forum

profkefah · 03-28-2020, 14:22

select MRD-LX1

phone firmware MRD-L41A 9.1.0.271(C185E5R4P1)

tset point

Welcome to Octoplus Huawei Software v.‪1.1.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port

Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port

2020-03-28 13:03:34 GMT -------------------------------------------------
Starting Reset FRP (Test Point)
Selected phone model: MRD-LX1
Please Power off the phone, attach Test Point and insert USB cable
MediaTek USB Port is not found

Reset FRP (Test Point) failed.
Performed by ‪1.1.5‬ Software version.

2020-03-28 13:03:56 GMT -------------------------------------------------
Starting Reset FRP (Test Point)
Selected phone model: MRD-LX1
Please Power off the phone, attach Test Point and insert USB cable

Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Brom Version: 5
Boot Loader Version: FE
Sending Authentication Data
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
Reading Partition Table
Reading FRP Partition
Removing FRP secure data...

Reset FRP (Test Point) done.
Performed by ‪1.1.5‬ Software version.

03-28-2020, 14:22	#1 (permalink)
profkefah No Life Poster Join Date: Mar 2015 Location: Islam Age: 35 Posts: 7,401 Member: 2371500 Status: Offline Thanks Meter: 5,802	Huawei Y6 Prime 2019 MRD-LX1F frp done test point select MRD-LX1 phone firmware MRD-L41A 9.1.0.271(C185E5R4P1) tset point Welcome to Octoplus Huawei Software v.‪1.1.5‬ To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: ##2846579## ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: ##14789632## ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' Found COM ports: 1: COM1 Communications Port 2: COM5 USB Serial Port Found COM ports: 1: COM1 Communications Port 2: COM5 USB Serial Port 2020-03-28 13:03:34 GMT ------------------------------------------------- Starting Reset FRP (Test Point) Selected phone model: MRD-LX1 Please Power off the phone, attach Test Point and insert USB cable MediaTek USB Port is not found Reset FRP (Test Point) failed. Performed by ‪1.1.5‬ Software version. 2020-03-28 13:03:56 GMT ------------------------------------------------- Starting Reset FRP (Test Point) Selected phone model: MRD-LX1 Please Power off the phone, attach Test Point and insert USB cable Detecting Chip Version... HW Chip : MT6761 HW Version : 8A00.CA01.0200.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 16 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 29820 Mb Reading Partition Table Reading FRP Partition Removing FRP secure data... Reset FRP (Test Point) done. Performed by ‪1.1.5‬ Software version.