INE-LX2r‬ Reset FRP (Factory Mode) done.

[Moh3en.pc]

Welcome to Octoplus Huawei Software v.‪1.2.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
Your balance: 100 credit(s)
2021-04-17 06:34:35 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪INE-LX2‬
Username: freeworld42
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: K3V7N18B26001091

Device Model: ‪INE-LX2r‬
System: ‪INE-LX2r 9.1.0.331(C636E3R1P1)‬
Checking balance...
Your balance: 100 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪INE-LX2r‬
System: ‪INE-LX2r 9.1.0.331(C636E3R1P1)‬
MEID: ‪00000000000000‬
IMEI A: ‪866
IMEI B: ‪866
S/N: ‪K3V7N18B26001091‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.5‬ Software version.