‪ARE-L22HN imei repair done latest security - GSM-Forum

umairsahil786 · 03-11-2020, 13:09

Welcome to Octoplus Huawei Software v.‪1.1.5.1‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM3 USB Serial Port

2020-03-11 12:01:56 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪ARE-L22HN‬
Connecting to server...
Authorization is successful

Device Model: ‪ARE-LX2‬
Boot: ‪Chipset-spf1721 8.2.0.33(00BT)_SBL1‬
System: ‪System 8.2.0.036(05QY)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪8627xxxxxxxxxxxx
IMEI B: ‪8627xxxxxxxxxxxx

Bluetooth MAC: ‪44:55:C4

5:00:14‬
WiFi MAC: ‪44:55:C4

5:C3:64‬
S/N: ‪3SKBB20106801237‬
Board S/N: ‪BB3SKI19CUH01300‬
Vendor Code: ‪hw‬
Country Code: ‪meafnaf‬

Connect done.
Performed by ‪1.1.5.1‬ Software version.

2020-03-11 12:04:27 GMT -------------------------------------------------
Starting Repair Info
New IMEI A: 35xxxxxxxxxxxxxx
New IMEI B: ‪35xxxxxxxxxxxxxx
Repairing IMEI A...
Repairing IMEI B...
Resetting your device

Repair Info done.
Performed by ‪1.1.5.1‬ Software version.

03-11-2020, 13:09	#1 (permalink)
umairsahil786 Freak Poster Join Date: May 2019 Location: Gujranwala Posts: 247 Member: 2909174 Status: Offline Sonork: 100.650600 Thanks Meter: 77	‪ARE-L22HN imei repair done latest security Welcome to Octoplus Huawei Software v.‪1.1.5.1‬ To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: ##2846579## ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: ##14789632## ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' Found COM ports: 1: COM1 Communications Port 2: COM3 USB Serial Port 2020-03-11 12:01:56 GMT ------------------------------------------------- Starting Connect Selected phone model: ‪ARE-L22HN‬ Connecting to server... Authorization is successful Device Model: ‪ARE-LX2‬ Boot: ‪Chipset-spf1721 8.2.0.33(00BT)_SBL1‬ System: ‪System 8.2.0.036(05QY)‬ MEID: ‪00000000000000‬ PESN: ‪00000000‬ IMEI A: ‪8627xxxxxxxxxxxx IMEI B: ‪8627xxxxxxxxxxxx Bluetooth MAC: ‪44:55:C45:00:14‬ WiFi MAC: ‪44:55:C45:C3:64‬ S/N: ‪3SKBB20106801237‬ Board S/N: ‪BB3SKI19CUH01300‬ Vendor Code: ‪hw‬ Country Code: ‪meafnaf‬ Connect done. Performed by ‪1.1.5.1‬ Software version. 2020-03-11 12:04:27 GMT ------------------------------------------------- Starting Repair Info New IMEI A: 35xxxxxxxxxxxxxx New IMEI B: ‪35xxxxxxxxxxxxxx Repairing IMEI A... Repairing IMEI B... Resetting your device Repair Info done. Performed by ‪1.1.5.1‬ Software version.