GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Octoplus Huawei Tool (https://forum.gsmhosting.com/vbb/f1053/)
-   -   New version old phone flash error! [Answered] (https://forum.gsmhosting.com/vbb/f1053/new-version-old-phone-flash-error-answered-2898756/)

Moh3en.pc 09-13-2020 17:59
New version old phone flash error! [Answered]
 
Code:
2020-09-13 16:47:48.716        Loading application settings
2020-09-13 16:47:48.732        Refreshing serial ports list
2020-09-13 16:47:48.952        Found COM ports:
2020-09-13 16:47:48.952        1: COM30 HUAWEI Mobile Connect - Fake Acm Interface
2020-09-13 16:47:48.952        2: COM1 Communications Port
2020-09-13 16:47:48.952        3: COM284 HUAWEI Mobile Connect - Fake Acm Interface
2020-09-13 16:47:48.953        4: COM282 DBAdapter Reserved Interface
2020-09-13 16:47:48.953        5: COM29 Android Adapter PCUI
2020-09-13 16:47:49.007        Welcome to Octoplus Huawei Software v.1.2.1
2020-09-13 16:47:49.007       
2020-09-13 16:47:49.007        To enable 'Manufacture' mode dial
2020-09-13 16:47:49.007        - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2020-09-13 16:47:49.007        ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2020-09-13 16:47:49.007        - for MTK based models: *#*#14789632#*#*
2020-09-13 16:47:49.007        ProjectMenu > Background Settings > USB Port Settings > Debug Mode
2020-09-13 16:47:49.007       
2020-09-13 16:47:49.007        To enable 'Fastboot' mode
2020-09-13 16:47:49.008        1. Power off the phone. Remove SD and SIM cards
2020-09-13 16:47:49.008        2. Press 'Vol-' and insert USB cable
2020-09-13 16:47:49.008        3. Wait until phone enters 'Fastboot' mode
2020-09-13 16:47:49.008       
2020-09-13 16:47:49.008        To enable 'Upgrade' mode
2020-09-13 16:47:49.008        1. Power off the phone. Remove SD and SIM cards
2020-09-13 16:47:49.008        2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2020-09-13 16:47:49.008        3. Wait until phone enters 'Upgrade mode'
2020-09-13 16:47:49.046        Refreshing serial ports list
2020-09-13 16:47:49.237        Found COM ports:
2020-09-13 16:47:49.237        1: COM30 HUAWEI Mobile Connect - Fake Acm Interface
2020-09-13 16:47:49.238        2: COM1 Communications Port
2020-09-13 16:47:49.238        3: COM284 HUAWEI Mobile Connect - Fake Acm Interface
2020-09-13 16:47:49.238        4: COM282 DBAdapter Reserved Interface
2020-09-13 16:47:49.239        5: COM29 Android Adapter PCUI
2020-09-13 16:47:49.306        Init finished
2020-09-13 16:48:13.692        Selected base ptable file: G:/HUAWEI FRIMWARE/G630-U10_V100R001C00B161CUSTC408D001_Firmware_Nonspecific(Northern_Africa)_Channel-Others_Android_4.3_EMUI_2.0 Lite_05012JXC/dload/UPDATE.APP
2020-09-13 16:48:13.789        OEMSBL_VERLIST : G730-C10V100R001C92B130_BOOT
2020-09-13 16:48:13.794        AMSS_VERLIST : G730-C10V100R001C92B130
2020-09-13 16:48:14.899        Selected phone model: G630-U10
2020-09-13 16:48:14.902        2020-09-13 16:48:14 GMT -------------------------------------------------
2020-09-13 16:48:14.905        Starting Write Firmware(Upgrade mode)
2020-09-13 16:48:14.909        Checking firmware package type
2020-09-13 16:48:14.927        Can?t find PACKAGE_TYPE partition
2020-09-13 16:48:14.930        Searching device in Upgrade mode...
2020-09-13 16:48:14.975        Connecting to phone..
2020-09-13 16:48:20.004       
2020-09-13 16:48:20.006        Write Firmware(Upgrade mode) failed.
2020-09-13 16:48:20.007        Performed by 1.2.1 Software version.
2020-09-13 16:49:30.215        Selected phone model: G630-U10
2020-09-13 16:49:30.215        2020-09-13 16:49:30 GMT -------------------------------------------------
2020-09-13 16:49:30.215        Starting Write Firmware(Upgrade mode)
2020-09-13 16:49:30.246        Checking firmware package type
2020-09-13 16:49:30.246        Can?t find PACKAGE_TYPE partition
2020-09-13 16:49:30.246        Searching device in Upgrade mode...
2020-09-13 16:49:30.308        Connecting to phone..
2020-09-13 16:49:35.363       
2020-09-13 16:49:35.363        Write Firmware(Upgrade mode) failed.
2020-09-13 16:49:35.363        Performed by 1.2.1 Software version.
2020-09-13 16:49:46.923        Selected phone model: G630-U10
2020-09-13 16:49:46.928        2020-09-13 16:49:46 GMT -------------------------------------------------
2020-09-13 16:49:46.932        Starting Write Firmware(Upgrade mode)
2020-09-13 16:49:46.952        Checking firmware package type
2020-09-13 16:49:46.957        Can?t find PACKAGE_TYPE partition
2020-09-13 16:49:46.962        Searching device in Upgrade mode...
2020-09-13 16:49:47.022        Connecting to phone..
2020-09-13 16:49:52.060       
2020-09-13 16:49:52.060        Write Firmware(Upgrade mode) failed.
2020-09-13 16:49:52.060        Performed by 1.2.1 Software version.
2020-09-13 16:50:05.452        Selected phone model: G630-U10
2020-09-13 16:50:05.452        2020-09-13 16:50:05 GMT -------------------------------------------------
2020-09-13 16:50:05.467        Starting Write Firmware(Upgrade mode)
2020-09-13 16:50:05.483        Checking firmware package type
2020-09-13 16:50:05.499        Can?t find PACKAGE_TYPE partition
2020-09-13 16:50:05.499        Searching device in Upgrade mode...
2020-09-13 16:50:05.562        Connecting to phone..
2020-09-13 16:50:10.588       
2020-09-13 16:50:10.595        Write Firmware(Upgrade mode) failed.
2020-09-13 16:50:10.601        Performed by 1.2.1 Software version.

Code:
2020-09-13 08:45:28.403        Loading application settings
2020-09-13 08:45:28.419        Refreshing serial ports list
2020-09-13 08:45:28.544        Found COM ports:
2020-09-13 08:45:28.544        1: COM1 Communications Port
2020-09-13 08:45:28.622        Welcome to Octoplus Huawei Software v.1.2.1
2020-09-13 08:45:28.622       
2020-09-13 08:45:28.622        To enable 'Manufacture' mode dial
2020-09-13 08:45:28.622        - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2020-09-13 08:45:28.622        ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2020-09-13 08:45:28.622        - for MTK based models: *#*#14789632#*#*
2020-09-13 08:45:28.622        ProjectMenu > Background Settings > USB Port Settings > Debug Mode
2020-09-13 08:45:28.622       
2020-09-13 08:45:28.622        To enable 'Fastboot' mode
2020-09-13 08:45:28.622        1. Power off the phone. Remove SD and SIM cards
2020-09-13 08:45:28.622        2. Press 'Vol-' and insert USB cable
2020-09-13 08:45:28.622        3. Wait until phone enters 'Fastboot' mode
2020-09-13 08:45:28.622       
2020-09-13 08:45:28.622        To enable 'Upgrade' mode
2020-09-13 08:45:28.622        1. Power off the phone. Remove SD and SIM cards
2020-09-13 08:45:28.622        2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2020-09-13 08:45:28.622        3. Wait until phone enters 'Upgrade mode'
2020-09-13 08:45:28.668        Refreshing serial ports list
2020-09-13 08:45:28.762        Found COM ports:
2020-09-13 08:45:28.762        1: COM1 Communications Port
2020-09-13 08:45:28.824        Init finished
2020-09-13 08:45:50.329        Selected base ptable file: G:/HUAWEI FRIMWARE/Che2-L11_C185B561_Firmware_Iraq_Saudi Arabia_Iran_Bahrain_Algeria_Egypt_Jordan_Morocco_Sudan_Nonspecific_Android6.0_EMUI4.0_05012WKR/Software/dload/UPDATE.APP
2020-09-13 08:45:50.454        VERLIST : Che2-L11C185B504
2020-09-13 08:45:51.732        Selected phone model: CHE2-L11
2020-09-13 08:45:51.732        2020-09-13 08:45:51 GMT -------------------------------------------------
2020-09-13 08:45:51.732        Starting Write Firmware(Upgrade mode)
2020-09-13 08:45:51.748        Checking firmware package type
2020-09-13 08:45:51.764        Can?t find PACKAGE_TYPE partition
2020-09-13 08:45:51.764        Searching device in Upgrade mode...
2020-09-13 08:46:11.810        No devices in Upgarde mode found
2020-09-13 08:46:11.810       
2020-09-13 08:46:11.810        Write Firmware(Upgrade mode) failed.
2020-09-13 08:46:11.810        Performed by 1.2.1 Software version.
2020-09-13 08:47:16.114        Selected phone model: CHE2-L11
2020-09-13 08:47:16.129        2020-09-13 08:47:16 GMT -------------------------------------------------
2020-09-13 08:47:16.129        Starting Write Firmware(Upgrade mode)
2020-09-13 08:47:16.129        Checking firmware package type
2020-09-13 08:47:16.145        Can?t find PACKAGE_TYPE partition
2020-09-13 08:47:16.161        Searching device in Upgrade mode...
2020-09-13 08:47:36.210        No devices in Upgarde mode found
2020-09-13 08:47:36.210       
2020-09-13 08:47:36.210        Write Firmware(Upgrade mode) failed.
2020-09-13 08:47:36.210        Performed by 1.2.1 Software version.
2020-09-13 08:48:22.597        Selected phone model: CHE2-L11
2020-09-13 08:48:22.597        2020-09-13 08:48:22 GMT -------------------------------------------------
2020-09-13 08:48:22.597        Starting Write Firmware(Upgrade mode)
2020-09-13 08:48:22.612        Checking firmware package type
2020-09-13 08:48:22.727        Can?t find PACKAGE_TYPE partition
2020-09-13 08:48:22.732        Searching device in Upgrade mode...
2020-09-13 08:48:42.750        No devices in Upgarde mode found
2020-09-13 08:48:42.750       
2020-09-13 08:48:42.750        Write Firmware(Upgrade mode) failed.
2020-09-13 08:48:42.750        Performed by 1.2.1 Software version.
2020-09-13 08:49:15.274        Selected phone model: CHE2-L11
2020-09-13 08:49:15.274        2020-09-13 08:49:15 GMT -------------------------------------------------
2020-09-13 08:49:15.274        Starting Write Firmware(Upgrade mode)
2020-09-13 08:49:15.274        Checking firmware package type
2020-09-13 08:49:15.290        Can?t find PACKAGE_TYPE partition
2020-09-13 08:49:15.290        Searching device in Upgrade mode...
2020-09-13 08:49:35.383        No devices in Upgarde mode found
2020-09-13 08:49:35.383       
2020-09-13 08:49:35.383        Write Firmware(Upgrade mode) failed.
2020-09-13 08:49:35.398        Performed by 1.2.1 Software version.
2020-09-13 08:49:57.839        Selected phone model: CHE2-L11
2020-09-13 08:49:57.839        2020-09-13 08:49:57 GMT -------------------------------------------------
2020-09-13 08:49:57.855        Starting Write Firmware(Upgrade mode)
2020-09-13 08:49:57.855        Checking firmware package type
2020-09-13 08:49:57.871        Can?t find PACKAGE_TYPE partition
2020-09-13 08:49:57.871        Searching device in Upgrade mode...
2020-09-13 08:50:17.920        No devices in Upgarde mode found
2020-09-13 08:50:17.920       
2020-09-13 08:50:17.920        Write Firmware(Upgrade mode) failed.
2020-09-13 08:50:17.920        Performed by 1.2.1 Software version.
OTHER TOOL FLASHING DONE!

ethhab 09-13-2020 20:40
if u have older octoplus huawei setup it can be done. they may fix on next update

Octopus box 09-14-2020 07:55
Hello.

We'll check where can be the problem and fix it in future updates

mossaddis 09-15-2020 15:42
2020-09-15 08:37:30 GMT -------------------------------------------------
Starting Write Firmware(Upgrade mode)
Checking firmware package type
Warning: Can’t find PACKAGE_TYPE partition
Searching device in Upgrade mode...
Connecting to phone..

Write Firmware(Upgrade mode) failed.
Performed by ‪1.2.1‬ Software version.

ethhab 09-15-2020 22:21
Quote:
Originally Posted by mossaddis (Post 14216335)
2020-09-15 08:37:30 GMT -------------------------------------------------
Starting Write Firmware(Upgrade mode)
Checking firmware package type
Warning: Can’t find PACKAGE_TYPE partition
Searching device in Upgrade mode...
Connecting to phone..

Write Firmware(Upgrade mode) failed.
Performed by ‪1.2.1‬ Software version.
try with octoplus huawei 1.1.5 it is tasted by me
Code:
2020-09-05 15:42:25.296        Loading application settings
2020-09-05 15:42:25.360        Refreshing serial ports list
2020-09-05 15:42:25.565        Found COM ports:
2020-09-05 15:42:25.565        1: COM1 USB Serial Port
2020-09-05 15:42:25.678        Welcome to Octoplus Huawei Software v.1.1.5
2020-09-05 15:42:25.679       
2020-09-05 15:42:25.679        To enable 'Manufacture' mode dial
2020-09-05 15:42:25.679        - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2020-09-05 15:42:25.680        ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2020-09-05 15:42:25.680        - for MTK based models: *#*#14789632#*#*
2020-09-05 15:42:25.681        ProjectMenu > Background Settings > USB Port Settings > Debug Mode
2020-09-05 15:42:25.681       
2020-09-05 15:42:25.681        To enable 'Fastboot' mode
2020-09-05 15:42:25.682        1. Power off the phone. Remove SD and SIM cards
2020-09-05 15:42:25.682        2. Press 'Vol-' and insert USB cable
2020-09-05 15:42:25.682        3. Wait until phone enters 'Fastboot' mode
2020-09-05 15:42:25.683       
2020-09-05 15:42:25.683        To enable 'Upgrade' mode
2020-09-05 15:42:25.683        1. Power off the phone. Remove SD and SIM cards
2020-09-05 15:42:25.684        2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2020-09-05 15:42:25.684        3. Wait until phone enters 'Upgrade mode'
2020-09-05 15:42:25.864        Init finished
2020-09-05 15:43:08.049        Refreshing serial ports list
2020-09-05 15:43:08.248        Found COM ports:
2020-09-05 15:43:08.253        1: COM1 USB Serial Port
2020-09-05 15:43:15.046        Selected file: D:/HUAWEI most/g620-ul01/UPDATE.APP
2020-09-05 15:43:15.050        OEMSBL_VERLIST : G620-L72V100R001C00B119_BOOT
2020-09-05 15:43:15.053        AMSS_VERLIST : G620-L72V100R001C00B119
2020-09-05 15:43:56.606        Selected phone model: Y530-U00
2020-09-05 15:43:56.613        2020-09-05 15:43:56 GMT -------------------------------------------------
2020-09-05 15:43:56.618        Starting Write Firmware
2020-09-05 15:43:56.632        Extracting firmware partitions...
2020-09-05 15:43:56.667        Partition has been extract successfully
2020-09-05 15:43:56.669        Checking firmware package type
2020-09-05 15:43:56.672        Can?t find PACKAGE_TYPE partition
2020-09-05 15:43:56.675        Searching device in Upgrade mode...
2020-09-05 15:43:56.727        Connecting to phone..
2020-09-05 15:44:16.810        Phone connect successfully
2020-09-05 15:44:16.816        Writing MD5RSA partition..
2020-09-05 15:44:19.045        Writing CRC partition..
2020-09-05 15:44:20.065        Writing OEMSBL_VERLIST partition..
2020-09-05 15:44:21.126        Writing AMSS_VERLIST partition..
2020-09-05 15:44:22.176        Writing GPT partition..
2020-09-05 15:44:23.279        Writing RPM partition..
2020-09-05 15:44:24.393        Writing TZ partition..
2020-09-05 15:44:25.579        Writing SBL1 partition..
2020-09-05 15:44:26.737        Writing MODEM partition..
2020-09-05 15:44:45.047        Writing SDI partition..
2020-09-05 15:44:46.113        Writing OEMSBL_VER partition..
2020-09-05 15:44:47.215        Writing AMSS_VER partition..
2020-09-05 15:44:48.315        Writing MODEMST1 partition..
2020-09-05 15:44:50.753        Writing MODEMST2 partition..
2020-09-05 15:44:53.130        Writing FSG partition..
2020-09-05 15:44:54.221        Writing ABOOT partition..
2020-09-05 15:44:55.720        Writing RECOVERY partition..
2020-09-05 15:45:00.569        Writing SYSTEM partition..
2020-09-05 15:49:20.920        Writing USERDATA partition..
2020-09-05 15:49:28.248        Writing CACHE partition..
2020-09-05 15:49:31.258        Writing CUST partition..
2020-09-05 15:49:40.614        Writing PERSIST partition..
2020-09-05 15:49:43.283        Writing BOOT partition..
2020-09-05 15:49:47.840        Firmware writing successfully completed
2020-09-05 15:49:47.840       
2020-09-05 15:49:47.855        Write Firmware done.
2020-09-05 15:49:47.871        Performed by 1.1.5 Software version.

mossaddis 09-16-2020 14:52
i cant find the old version tool

Octopus box 09-16-2020 15:39
You can try to use Octoplus Huawei Tool 1.2.0 after repeat operation and post here full Software log

mossaddis 09-16-2020 18:25
2020-09-15 08:43:24.448 Loading application settings
2020-09-15 08:43:24.464 Refreshing serial ports list
2020-09-15 08:43:24.648 Found COM ports:
2020-09-15 08:43:24.648 1: COM9 USB Serial Port
2020-09-15 08:43:24.648 2: COM56 Android Adapter PCUI
2020-09-15 08:43:24.648 3: COM58 DBAdapter Reserved Interface
2020-09-15 08:43:24.648 4: COM60 HUAWEI Mobile Connect - 3G Application Interface
2020-09-15 08:43:24.648 5: COM61 HUAWEI Mobile Connect - 3G PC UI Interface
2020-09-15 08:43:24.648 6: COM20 Android Adapter Modem
2020-09-15 08:43:24.648 7: COM81 HUAWEI Mobile Connect - 3G Modem
2020-09-15 08:43:24.833 Welcome to Octoplus Huawei Software v.1.2.1
2020-09-15 08:43:24.833
2020-09-15 08:43:24.833 To enable 'Manufacture' mode dial
2020-09-15 08:43:24.833 - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2020-09-15 08:43:24.833 ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2020-09-15 08:43:24.833 - for MTK based models: *#*#14789632#*#*
2020-09-15 08:43:24.833 ProjectMenu > Background Settings > USB Port Settings > Debug Mode
2020-09-15 08:43:24.833
2020-09-15 08:43:24.833 To enable 'Fastboot' mode
2020-09-15 08:43:24.833 1. Power off the phone. Remove SD and SIM cards
2020-09-15 08:43:24.833 2. Press 'Vol-' and insert USB cable
2020-09-15 08:43:24.833 3. Wait until phone enters 'Fastboot' mode
2020-09-15 08:43:24.833
2020-09-15 08:43:24.833 To enable 'Upgrade' mode
2020-09-15 08:43:24.833 1. Power off the phone. Remove SD and SIM cards
2020-09-15 08:43:24.833 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2020-09-15 08:43:24.833 3. Wait until phone enters 'Upgrade mode'
2020-09-15 08:43:24.980 Refreshing serial ports list
2020-09-15 08:43:25.165 Found COM ports:
2020-09-15 08:43:25.165 1: COM9 USB Serial Port
2020-09-15 08:43:25.165 2: COM56 Android Adapter PCUI
2020-09-15 08:43:25.165 3: COM58 DBAdapter Reserved Interface
2020-09-15 08:43:25.165 4: COM60 HUAWEI Mobile Connect - 3G Application Interface
2020-09-15 08:43:25.165 5: COM61 HUAWEI Mobile Connect - 3G PC UI Interface
2020-09-15 08:43:25.165 6: COM20 Android Adapter Modem
2020-09-15 08:43:25.165 7: COM81 HUAWEI Mobile Connect - 3G Modem
2020-09-15 08:43:25.234 Init finished
2020-09-15 08:43:35.967 Selected base file: C:/Users/THINKPAD/Downloads/Compressed/Huawei G630 Firmware/dload/UPDATE.APP
2020-09-15 08:43:37.587 OEMSBL_VERLIST : G730-C10V100R001C92B130_BOOT
2020-09-15 08:43:37.593 AMSS_VERLIST : G730-C10V100R001C92B130
2020-09-15 08:44:11.960 Selected phone model: G630-U10
2020-09-15 08:44:11.960 2020-09-15 08:44:11 GMT -------------------------------------------------
2020-09-15 08:44:11.976 Starting Write Firmware(Upgrade mode)
2020-09-15 08:44:11.976 Checking firmware package type
2020-09-15 08:44:12.007 Can?t find PACKAGE_TYPE partition
2020-09-15 08:44:12.023 Searching device in Upgrade mode...
2020-09-15 08:44:12.023 Connecting to phone..
2020-09-15 08:44:17.026
2020-09-15 08:44:17.041 Write Firmware(Upgrade mode) failed.
2020-09-15 08:44:17.041 Performed by 1.2.1 Software version.
2020-09-15 08:44:30.380 Selected phone model: G630-U10
2020-09-15 08:44:30.380 2020-09-15 08:44:30 GMT -------------------------------------------------
2020-09-15 08:44:30.396 Starting Write Firmware(Upgrade mode)
2020-09-15 08:44:30.418 Checking firmware package type
2020-09-15 08:44:30.434 Can?t find PACKAGE_TYPE partition
2020-09-15 08:44:30.434 Searching device in Upgrade mode...
2020-09-15 08:44:30.449 Connecting to phone..
2020-09-15 08:44:35.454
2020-09-15 08:44:35.454 Write Firmware(Upgrade mode) failed.
2020-09-15 08:44:35.470 Performed by 1.2.1 Software version.
2020-09-15 08:58:38.149 Selected phone model: G630-U10
2020-09-15 08:58:38.188 2020-09-15 08:58:38 GMT -------------------------------------------------
2020-09-15 08:58:38.190 Starting Write Firmware(Upgrade mode)
2020-09-15 08:58:38.200 Checking firmware package type
2020-09-15 08:58:38.321 Can?t find PACKAGE_TYPE partition
2020-09-15 08:58:38.362 Searching device in Upgrade mode...
2020-09-15 08:59:42.212 Connecting to phone..
2020-09-15 08:59:50.241
2020-09-15 08:59:50.310 Write Firmware(Upgrade mode) failed.
2020-09-15 08:59:50.388 Performed by 1.2.1 Software version.
2020-09-15 09:00:07.998 Refreshing serial ports list
2020-09-15 09:00:08.135 Found COM ports:
2020-09-15 09:00:08.142 1: COM9 USB Serial Port
2020-09-15 09:00:08.149 2: COM109 DBAdapter Reserved Interface
2020-09-15 09:00:08.158 3: COM83 SAMSUNG Mobile USB Modem
2020-09-15 09:00:08.165 4: COM108 Android Adapter Modem
2020-09-15 09:00:16.598 Selected phone model: G630-U10
2020-09-15 09:00:16.598 2020-09-15 09:00:16 GMT -------------------------------------------------
2020-09-15 09:00:16.613 Starting Write Firmware(Upgrade mode)
2020-09-15 09:00:16.645 Checking firmware package type
2020-09-15 09:00:16.660 Can?t find PACKAGE_TYPE partition
2020-09-15 09:00:16.676 Searching device in Upgrade mode...
2020-09-15 09:00:16.682 Connecting to phone..
2020-09-15 09:00:21.675
2020-09-15 09:00:21.690 Write Firmware(Upgrade mode) failed.
2020-09-15 09:00:21.697 Performed by 1.2.1 Software version.
2020-09-15 09:00:30.384 Selected phone model: G630-U10
2020-09-15 09:00:30.399 2020-09-15 09:00:30 GMT -------------------------------------------------
2020-09-15 09:00:30.415 Starting Write Firmware(Upgrade mode)
2020-09-15 09:00:30.453 Checking firmware package type
2020-09-15 09:00:30.469 Can?t find PACKAGE_TYPE partition
2020-09-15 09:00:30.469 Searching device in Upgrade mode...
2020-09-15 09:00:30.484 Connecting to phone..
2020-09-15 09:00:35.490
2020-09-15 09:00:35.506 Write Firmware(Upgrade mode) failed.
2020-09-15 09:00:35.506 Performed by 1.2.1 Software version.

Octopus box 09-17-2020 08:04
You can try to use Octoplus Huawei Tool 1.2.0 after repeat operation and post here full Software log

mossaddis 09-19-2020 06:07
Send me the link to version 120

afghanistanmob 09-19-2020 06:34
Quote:
Originally Posted by mossaddis (Post 14219355)
Send me the link to version 120


https://androidhost.ru/XM4

ethhab 09-19-2020 20:44
Quote:
Originally Posted by mossaddis (Post 14219355)
Send me the link to version 120
try the newer version octoplus huawei 1.2.1.1 go to support area, test software they fix the qualcomm flashing bug

Moh3en.pc 09-28-2020 18:24
Code:
2020-09-28 17:00:38.548        Loading application settings
2020-09-28 17:00:38.595        Refreshing serial ports list
2020-09-28 17:00:38.798        Found COM ports:
2020-09-28 17:00:38.798        1: COM1 Communications Port
2020-09-28 17:00:38.798        2: COM918 Android Adapter PCUI
2020-09-28 17:00:38.798        3: COM919 DBAdapter Reserved Interface
2020-09-28 17:00:38.860        Welcome to Octoplus Huawei Software v.1.2.1.1
2020-09-28 17:00:38.860       
2020-09-28 17:00:38.860        To enable 'Manufacture' mode dial
2020-09-28 17:00:38.860        - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2020-09-28 17:00:38.860        ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2020-09-28 17:00:38.860        - for MTK based models: *#*#14789632#*#*
2020-09-28 17:00:38.860        ProjectMenu > Background Settings > USB Port Settings > Debug Mode
2020-09-28 17:00:38.860       
2020-09-28 17:00:38.860        To enable 'Fastboot' mode
2020-09-28 17:00:38.860        1. Power off the phone. Remove SD and SIM cards
2020-09-28 17:00:38.860        2. Press 'Vol-' and insert USB cable
2020-09-28 17:00:38.860        3. Wait until phone enters 'Fastboot' mode
2020-09-28 17:00:38.860       
2020-09-28 17:00:38.860        To enable 'Upgrade' mode
2020-09-28 17:00:38.860        1. Power off the phone. Remove SD and SIM cards
2020-09-28 17:00:38.860        2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2020-09-28 17:00:38.860        3. Wait until phone enters 'Upgrade mode'
2020-09-28 17:00:38.907        Refreshing serial ports list
2020-09-28 17:00:39.032        Found COM ports:
2020-09-28 17:00:39.032        1: COM1 Communications Port
2020-09-28 17:00:39.032        2: COM918 Android Adapter PCUI
2020-09-28 17:00:39.032        3: COM919 DBAdapter Reserved Interface
2020-09-28 17:00:39.079        Init finished
2020-09-28 17:06:33.004        2020-09-28 17:06:33 GMT -------------------------------------------------
2020-09-28 17:06:33.019        Starting Reset FRP (Factory Mode)
2020-09-28 17:06:33.019        Selected phone model: JAT-L41
2020-09-28 17:06:33.019        Please Power off the phone, attach Test Point and insert USB cable
2020-09-28 17:06:53.099        MediaTek USB Port is not found
2020-09-28 17:06:53.099       
2020-09-28 17:06:53.099        Reset FRP (Factory Mode) failed.
2020-09-28 17:06:53.099        Performed by 1.2.1.1 Software version.
2020-09-28 17:06:58.608        2020-09-28 17:06:58 GMT -------------------------------------------------
2020-09-28 17:06:58.623        Starting Reset FRP (Factory Mode)
2020-09-28 17:06:58.623        Selected phone model: JAT-L41
2020-09-28 17:06:58.623        Please Power off the phone, attach Test Point and insert USB cable
2020-09-28 17:07:18.708        MediaTek USB Port is not found
2020-09-28 17:07:18.708       
2020-09-28 17:07:18.708        Reset FRP (Factory Mode) failed.
2020-09-28 17:07:18.708        Performed by 1.2.1.1 Software version.
2020-09-28 17:08:09.767        2020-09-28 17:08:09 GMT -------------------------------------------------
2020-09-28 17:08:09.767        Starting Reset FRP (Factory Mode)
2020-09-28 17:08:09.782        Selected phone model: JAT-L41
2020-09-28 17:08:09.782        Please Power off the phone, attach Test Point and insert USB cable
2020-09-28 17:08:29.794        MediaTek USB Port is not found
2020-09-28 17:08:29.794       
2020-09-28 17:08:29.794        Reset FRP (Factory Mode) failed.
2020-09-28 17:08:29.794        Performed by 1.2.1.1 Software version.
2020-09-28 17:08:31.385        2020-09-28 17:08:31 GMT -------------------------------------------------
2020-09-28 17:08:31.385        Starting Reset FRP (Factory Mode)
2020-09-28 17:08:31.401        Selected phone model: JAT-L41
2020-09-28 17:08:31.401        Please Power off the phone, attach Test Point and insert USB cable
2020-09-28 17:08:51.431        MediaTek USB Port is not found
2020-09-28 17:08:51.431       
2020-09-28 17:08:51.431        Reset FRP (Factory Mode) failed.
2020-09-28 17:08:51.431        Performed by 1.2.1.1 Software version.
2020-09-28 17:09:13.346        2020-09-28 17:09:13 GMT -------------------------------------------------
2020-09-28 17:09:13.346        Starting Reset FRP (Factory Mode)
2020-09-28 17:09:13.362        Selected phone model: JAT-L41
2020-09-28 17:09:13.362        Please Power off the phone, attach Test Point and insert USB cable
2020-09-28 17:09:33.420        MediaTek USB Port is not found
2020-09-28 17:09:33.420       
2020-09-28 17:09:33.420        Reset FRP (Factory Mode) failed.
2020-09-28 17:09:33.420        Performed by 1.2.1.1 Software version.



I think a fixed version should be provided, it is very difficult, many phones are not recognized

Octopus box 09-29-2020 08:05
Quote:
2020-09-28 17:09:13.362 Please Power off the phone, attach Test Point and insert USB cable
2020-09-28 17:09:33.420 MediaTek USB Port is not found
2020-09-28 17:09:33.420
2020-09-28 17:09:33.420 Reset FRP (Factory Mode) failed.
Hello.

What devices were appear in Device manager? Please, make screenshot

Octopus box 09-29-2020 09:12
Ok, we'll check eveyrhing again attentive and try to fix the issue in future update, thx for feedback


All times are GMT +1. The time now is 15:19.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.25058 seconds with 6 queries

SEO by vBSEO