GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus Huawei Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 04-03-2021, 15:05   #136 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899

HuAWEI PSMART 2019 POT-LX1 UNLOCK WITH TP FREE
Quote:
Job ID: 0000000000D24631
2021-04-01 16:30:00 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?POT-LX1?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ?1.2.4? Software version.

Job ID: 0000000000D246D0
2021-04-01 16:32:03 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?POT-LX1?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19418011668
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?POT-LX1?
System: ?POT-LX1 10.0.0.187(C432E3R1P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4? Software version.
2021-04-01 16:33:16 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?POT-LX1?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?POT-LX1?
System: ?POT-LX1 10.0.0.187(C432E3R1P3)?
MEID: ?00000000000000?
IMEI A: ?868188043024854?
IMEI B: ?000000000000000?
S/N: ?6BY7N19418011668?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4? Software version.
  Reply With Quote
Old 04-03-2021, 15:05   #137 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI PSMART 2019 POT-LX1 UNLOCK WITH TP FREE
Quote:
Job ID: 0000000000D24631
2021-04-01 16:30:00 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?POT-LX1?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ?1.2.4? Software version.

Job ID: 0000000000D246D0
2021-04-01 16:32:03 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?POT-LX1?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19418011668
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?POT-LX1?
System: ?POT-LX1 10.0.0.187(C432E3R1P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4? Software version.
2021-04-01 16:33:16 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?POT-LX1?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?POT-LX1?
System: ?POT-LX1 10.0.0.187(C432E3R1P3)?
MEID: ?00000000000000?
IMEI A: ?868188043024854?
IMEI B: ?000000000000000?
S/N: ?6BY7N19418011668?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4? Software version.
  Reply With Quote
Old 04-03-2021, 15:06   #138 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI Y6 2019 MRD-LX1 UNLOCK DONE WITH TP FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.4?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 0000000000D3ACA5
2021-04-03 10:39:53 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MRD-LX1?
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected ?MediaTek USB Port? port

Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Brom Version: 5
Boot Loader Version: FE
Initializing remote service connection...
Downloading Authentication Data...
Sending Authentication Data...
Initializing remote service connection...
Downloading Download Agent data...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent.
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing remote service connection...
Downloading preloader data...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
IMEI A: ?866945042308907?
IMEI B: ?866945042329010?

Connect done.
Performed by ?1.2.4? Software version.
2021-04-03 10:40:31 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MRD-LX1?
Creating partition backup: ?MRD-LX1_protect1_2021-04-03_11-40-32.bin?
Searching the unlock file...
Unlocking device...

Direct Unlock done.
Performed by ?1.2.4? Software version.
  Reply With Quote
Old 04-03-2021, 15:08   #139 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI PSMART 2018 FIG-LX1 UNLOCK DONE WITHOUT TP FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.4.1?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM86 DBAdapter Reserved Interface
3: COM87 HUAWEI Mobile Connect - Fake Acm Interface
4: COM88 Android Adapter PCUI

Job ID: 0000000000D3303C
2021-04-02 16:39:09 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?FIG-LX1?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?VERLIST? partition...
Writing ?PACKAGE_TYPE? partition...
Writing ?XLOADER? partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ?1.2.4.1? Software version.

Job ID: 0000000000D33062
2021-04-02 16:39:57 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?FIG-LX1?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN659_A8.0_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: HBEDU18904001804
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?FIG-LX1?
System: ?FIG-LX1 9.1.0.115(IRLC368E6R1P2)?
MEID: ?00000000000000?
IMEI A: ?869012036769524?
IMEI B: ?000000000000000?
S/N: ?HBEDU18904001804?
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4.1? Software version.
2021-04-02 16:40:55 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?FIG-LX1?
Saving backup of MODEM_SECURE...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file ImeiFile_I1.bin!
Error: Can't get file ImeiFile_I1.hash!
Writing MODEM_SECURE partition...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4.1? Software version.

Job ID: 0000000000D330CA
2021-04-02 16:41:58 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?FIG-LX1?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!

ON/OFF Factory Mode failed.
Performed by ?1.2.4.1? Software version.
2021-04-02 16:42:27 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?FIG-LX1?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN659_A8.0_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: HBEDU18904001804
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?FIG-LX1?
System: ?FIG-LX1 9.1.0.115(IRLC368E6R1P2)?
MEID: ?00000000000000?
IMEI A: ?869012036769524?
IMEI B: ?000000000000000?
S/N: ?HBEDU18904001804?
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ?1.2.4.1? Software version.
  Reply With Quote
Old 04-05-2021, 16:57   #140 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI PSMART 2019 POT-LX1 UNLOCK WITHOUT TP FREE
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4.1‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port

Job ID: 0000000000D5E516
2021-04-05 15:29:22 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Writing ‪PACKAGE_TYPE‬ partition...
Writing ‪XLOADER‬ partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ‪1.2.4.1‬ Software version.

Job ID: 0000000000D5E543
2021-04-05 15:29:50 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19118000079
Detected ‪Android Sooner Single ADB Interface‬ port

Connect failed.
Performed by ‪1.2.4.1‬ Software version.

Job ID: 0000000000D5E5C1
2021-04-05 15:31:10 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ‪1.2.4.1‬ Software version.

Job ID: 0000000000D5E644
2021-04-05 15:32:30 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ‪1.2.4.1‬ Software version.

Job ID: 0000000000D5E6C6
2021-04-05 15:34:00 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19118000079
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4.1‬ Software version.
2021-04-05 15:35:09 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.4.1‬ Software version.
2021-04-05 15:35:20 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.4.1‬ Software version.
2021-04-05 15:35:21 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.4.1‬ Software version.
Your balance: 30 credit(s)
2021-04-05 15:35:59 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
MEID: ‪00000000000000‬
IMEI A: ‪868188040979001‬
IMEI B: ‪000000000000000‬
S/N: ‪6BY7N19118000079‬
Saving backup of MODEM_SECURE...
Reading secure data...

Direct Unlock failed.
Performed by ‪1.2.4.1‬ Software version.

Job ID: 0000000000D5E841
2021-04-05 15:37:54 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Found a fastboot device: 섳v聆ଧᤘ଄頻ଧ
Detected ‪Android Sooner Single ADB Interface‬ port

Connect failed.
Performed by ‪1.2.4.1‬ Software version.

Job ID: 0000000000D5EE0B
2021-04-05 15:51:45 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19118000079
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4.1‬ Software version.
2021-04-05 15:53:26 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
MEID: ‪00000000000000‬
IMEI A: ‪868188040979001‬
IMEI B: ‪000000000000000‬
S/N: ‪6BY7N19118000079‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.4.1‬ Software version.

Job ID: 0000000000D5EF83
2021-04-05 15:55:04 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19118000079
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ‪1.2.4.1‬ Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 04-06-2021, 16:49   #141 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI PSMART 2019 POT-LX1 FRP REMOVED WITH TP FREE
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Θύρα επικοινωνιών

Job ID: 0000000000D7584D
2021-04-06 15:44:28 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪POT-LX1‬
Username:
Warning: Invalid username

Reset FRP (Factory Mode) failed.
Performed by ‪1.2.4‬ Software version.
Your balance: 30 credit(s)

Job ID: 0000000000D75882
2021-04-06 15:44:57 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found

Reset FRP (Factory Mode) failed.
Performed by ‪1.2.4‬ Software version.

Job ID: 0000000000D758B3
2021-04-06 15:45:31 GMT -------------------------------------------------
Starting Reset FRP (Fastboot Mode)
Selected phone model: ‪POT-LX1‬

Reset FRP (Fastboot Mode) is not supported for this device.
Performed by ‪1.2.4‬ Software version.

Job ID: 0000000000D758D0
2021-04-06 15:45:52 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 39V4C19417000332

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.292(C432E10R1P3)‬
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.292(C432E10R1P3)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.4‬ Software version.
  Reply With Quote
Old 04-06-2021, 22:55   #142 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI MATE 20 PRO LYA-L29 FRP DONE...........
Quote:
Job ID: 0000000000D78F02
2021-04-06 21:47:16 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪LYA-L29‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 7N5GSJ18AX114049

Device Model: ‪LYA-L29‬
System: ‪LYA-L29 10.0.0.220(C432E7R1P5)‬
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪LYA-L29‬
System: ‪LYA-L29 10.0.0.220(C432E7R1P5)‬
MEID: ‪A000009BEC1A40‬
IMEI A: ‪869410038204252‬
IMEI B: ‪869410038244266‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.4‬ Software version.

Job ID: 0000000000D78FC9
2021-04-06 21:50:26 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪LYA-L29‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 7N5GSJ18AX114049
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪LYA-L29‬
System: ‪LYA-L29 10.0.0.220(C432E7R1P5)‬
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ‪1.2.4‬ Software version.
  Reply With Quote
Old 04-06-2021, 23:11   #143 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI MATE 20 PRO LYA-L29 READ CERT DONE,,,,,
Quote:
Job ID: 0000000000D793B1
2021-04-06 22:06:41 GMT -------------------------------------------------
Starting Read Cert
Selected phone model: ‪LYA-L29‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 7N5GSJ18AX114049
Detected ‪Android Sooner Single ADB Interface‬ port
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪LYA-L29‬
System: ‪LYA-L29 10.0.0.220(C432E7R1P5)‬
MEID: ‪A000009BEC1A40‬
IMEI A: ‪869410038204252‬
IMEI B: ‪869410038244266‬
Reading certificate files...
Rebooting device...

Read Cert done.
Performed by ‪1.2.4‬ Software version.

Job ID: 0000000000D79436
2021-04-06 22:08:54 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪LYA-L29‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 7N5GSJ18AX114049
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪LYA-L29‬
System: ‪LYA-L29 10.0.0.220(C432E7R1P5)‬
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ‪1.2.4‬ Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 04-14-2021, 14:42   #144 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI PSMART 2019 POT-LX1 UNLOCK DONE WITH TP
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM18 Android Adapter PCUI
2: COM19 HUAWEI Mobile Connect - Fake Acm Interface
3: COM20 DBAdapter Reserved Interface
2021-04-14 13:30:09 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-04-14 13:33:04 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-04-14 13:33:33 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-04-14 13:34:22 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-04-14 13:35:34 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Error: Failed write ‪BASE_VERLIST‬ partition
Canceling... Please be patient!
Checking firmware package type
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-04-14 13:39:26 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19510001294
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.292(C432E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4.3‬ Software version.
2021-04-14 13:40:35 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.4.3‬ Software version.
Your balance: 30 credit(s)
2021-04-14 13:41:20 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.292(C432E9R1P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.4.3‬ Software version.
  Reply With Quote
Old 04-14-2021, 18:33   #145 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI PSMART 2018 FIG-LX1 UNLOCK DONE WITH TP
Quote:
Job ID: 0000000000E06811
2021-04-14 17:31:57 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪FIG-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN659_A8.0_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: HBEDU18803003923
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪FIG-LX1‬
System: ‪FIG-LX1 9.1.0.216(C432E12R1P5)‬
MEID: ‪00000000000000‬
IMEI A: ‪869012035127179‬
IMEI B: ‪000000000000000‬
S/N: ‪HBEDU18803003923‬
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4‬ Software version.
2021-04-14 17:32:34 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪FIG-LX1‬
Saving backup of MODEM_SECURE...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file ImeiFile_I1.bin!
Error: Can't get file ImeiFile_I1.hash!
Writing MODEM_SECURE partition...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.4‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 04-20-2021, 13:46   #146 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI P8 LITE ANE-LX1 UNLOCK DONE WITH MANUFACTURE MODE FREE
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM18 Android Adapter PCUI
2: COM19 HUAWEI Mobile Connect - Fake Acm Interface
3: COM20 DBAdapter Reserved Interface
4: COM28 HUAWEI Mobile Connect - Fake Acm Interface
2021-04-20 12:44:39 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪ANE-LX1‬
Detected ‪Android Adapter PCUI‬ port
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...

Device Model: ‪PRA-L11‬
Firmware: ‪System 8.0.0.046(0EY2)‬
Boot: ‪System 8.0.0.046(0EY2)_BOOT‬
Fastboot: ‪Chipset-dallas8.0.1.001(01BD)_FASTBOOT‬
System: ‪System 8.0.0.046(0EY2)‬
Recovery: ‪(unknow)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪865006030720164‬
IMEI B: ‪000000000000000‬
Bluetooth MAC: ‪D8:C7:71:33:3E:8A‬
WiFi MAC: ‪D8:C7:71:33:3D:8B‬
S/N: ‪57U7N17627006744‬
Board S/N: ‪7N4EWG176W104981‬
Vendor Code: ‪hw‬
Country Code: ‪eu‬

Connect done.
Performed by ‪1.2.4.3‬ Software version.
2021-04-20 12:44:51 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪ANE-LX1‬
Reading basic data...
Reading secure data...
Writing public keys...
Identifying security...
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot

Direct Unlock done.
Performed by ‪1.2.4.3‬ Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 04-21-2021, 14:17   #147 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
https://www.youtube.com/watch?v=ESpB...FO%2CTRAVELFIT
HuAWEI P30 LITE PRA-LX1A UNLOCK DONE WITHOUT TP FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.5?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
Your balance: 30 credit(s)

Found COM ports:
1: COM13 HUAWEI Mobile Connect - Fake Acm Interface
2: COM14 Android Adapter PCUI
3: COM15 DBAdapter Reserved Interface
2021-04-14 21:26:04 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Writing ?PACKAGE_TYPE? partition...
Writing ?XLOADER? partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ?1.2.5? Software version.
2021-04-14 21:26:21 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Error: Failed to open COM port COM19
Error: Connecting to COM19 failed
Searching Fastboot devices...
Canceling... Please be patient!

Connect canceled.
Performed by ?1.2.5? Software version.
2021-04-14 21:26:32 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: JRQ0220525005057
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 9.1.0.368(C431E5R2P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5? Software version.
2021-04-14 21:27:38 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 9.1.0.368(C431E5R2P3)?
MEID: ?00000000000000?
IMEI A: ?864056043811261?
IMEI B: ?000000000000000?
S/N: ?JRQ0220525005057?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.5? Software version.
2021-04-14 21:29:15 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: JRQ0220525005057
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 9.1.0.368(C431E5R2P3)?
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ?1.2.5? Software version.
  Reply With Quote
Old 04-21-2021, 19:38   #148 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
https://www.youtube.com/watch?v=aRt9...FO%2CTRAVELFIT
HuAWEI P30 LITE PRA-LX1A UNLOCK WITH TESTPOINT FREE
Quote:
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port

Job ID: 0000000000E63E95
2021-04-20 11:13:13 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Error: Failed write ?BASE_VERLIST? partition
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ?1.2.4.1? Software version.

Job ID: 0000000000E643D8
2021-04-20 11:30:14 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 36V4C20623000470
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.365(IRLC555E9R1P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4.1? Software version.
2021-04-20 11:31:33 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ?1.2.4.1? Software version.
Your balance: 30 credit(s)
2021-04-20 11:32:15 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.365(IRLC555E9R1P3)?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4.1? Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-09-2021, 19:30   #149 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI P30 LITE MAR-LX3A IMEI WRITE CERT DONE
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM9 DBAdapter Reserved Interface
2: COM10 Android Adapter PCUI
3: COM11 HUAWEI Mobile Connect - Fake Acm Interface
2021-05-09 18:13:29 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Writing ‪PACKAGE_TYPE‬ partition...
Writing ‪XLOADER‬ partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ‪1.2.4.3‬ Software version.
Selected IMEI_A file: C:/Users/Professor/Desktop/MAR-LX1A_IMEI_SLOT_1_864056043035200.obf
2021-05-09 18:14:45 GMT -------------------------------------------------
Starting Write Cert
Selected phone model: ‪MAR-LX1A‬
Connecting to the credit server...
Error: Wrong username or password!
Error: The connection to the credit server failed!

Write Cert failed.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:15:13 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪MAR-LX1A‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: A4N4C20813002434
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪MAR-LX3A‬
System: ‪MAR-L03A 9.1.0.325(C792E9R1P5)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:16:24 GMT -------------------------------------------------
Starting Write Cert
Selected phone model: ‪MAR-LX1A‬
Connecting to the credit server...
Error: Wrong username or password!
Error: The connection to the credit server failed!

Write Cert failed.
Performed by ‪1.2.4.3‬ Software version.
Your balance: 30 credit(s)
2021-05-09 18:17:35 GMT -------------------------------------------------
Starting Write Cert
Selected phone model: ‪MAR-LX1A‬
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found

Write Cert failed.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:18:36 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching Fastboot devices...
Found a fastboot device: A4N4C20813002434
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪MAR-LX3A‬
System: ‪MAR-L03A 9.1.0.325(C792E9R1P5)‬
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:21:11 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Writing ‪PACKAGE_TYPE‬ partition...
Writing ‪XLOADER‬ partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:21:53 GMT -------------------------------------------------
Starting Write Cert
Selected phone model: ‪MAR-LX1A‬
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: A4N4C20813002434
Detected ‪Android Sooner Single ADB Interface‬ port
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪MAR-LX3A‬
System: ‪MAR-L03A 9.1.0.325(C792E9R1P5)‬
MEID: ‪00000000000000‬
IMEI A: ‪860693046071537‬
IMEI B: ‪000000000000000‬
S/N: ‪A4N4C20813002434‬
Saving backup of MODEM_SECURE...
Saving backup of OEMINFO...
Reading secure data...
Writing certificate files...
Rebooting device...

Write Cert done.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:25:59 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:26:19 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:26:39 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...

ON/OFF Factory Mode failed.
Performed by ‪1.2.4.3‬ Software version.
2021-05-09 18:26:59 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: A4N4C20813002434
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪MAR-LX3A‬
System: ‪MAR-L03A 9.1.0.325(C792E9R1P5)‬
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ‪1.2.4.3‬ Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-10-2021, 15:25   #150 (permalink)
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI P30 PRO VOG-L09 FRP REMOVED FREE WITH TP
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 0000000000FB6ED2
2021-05-10 14:21:07 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪VOG-L29‬
Username:
Warning: Invalid username

Reset FRP (Factory Mode) failed.
Performed by ‪1.2.4‬ Software version.
Your balance: 30 credit(s)

Job ID: 0000000000FB6EF4
2021-05-10 14:21:34 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪VOG-L29‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 026AYU199C013050

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.138(C431E8R2P3)‬
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.138(C431E8R2P3)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.4‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to AbDuLlAH kHaWaR For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:02.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.41857 seconds with 8 queries

SEO by vBSEO