GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus Huawei Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 05-14-2021, 15:38   #151 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406

Huawei psmart FIG-LX1 UNLOCK WITH TP
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
2021-05-14 14:37:12 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪FIG-LX1‬
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Found a fastboot device: HBEDU18904002537
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪FIG-LX1‬
System: ‪FIG-LX1 9.1.0.171(IRLC368E8R1P5)‬
MEID: ‪00000000000000‬
IMEI A: ‪869012036776859‬
IMEI B: ‪000000000000000‬
S/N: ‪HBEDU18904002537‬
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4.3‬ Software version.
2021-05-14 14:37:46 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪FIG-LX1‬
Connecting to server...
Saving backup of MODEM_SECURE...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file ImeiFile_I1.bin!
Error: Can't get file ImeiFile_I1.hash!
Writing MODEM_SECURE partition...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.4.3‬ Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-15-2021, 21:26   #152 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
https://www.youtube.com/watch?v=vgPF...FO%2CTRAVELFIT
HuAWEI P20 PRO (CLT-L09) FRP REMOVED FREE
Quote:
Job ID: 0000000000F7750E
2021-05-06 11:57:48 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ?CLT-L09?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN970_A8.1_V0...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: LCL0218329000584

Device Model: ?CLT-L09?
System: ?CLT-L09 10.0.0.185(C782E8R1P3)?
Writing FRP partition..

Reset FRP (Factory Mode) done.
Performed by ?1.2.4? Software version.
  Reply With Quote
Old 05-16-2021, 12:46   #153 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
https://www.youtube.com/watch?v=O5bF...FO%2CTRAVELFIT

HUAWEI HONOR 8 (FRD-AL10) FRP GMAIL ACCOUNT REMOVED IN FASTBOOT
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-17-2021, 14:10   #154 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
HuAWEI P30 LITE UNLOCK DONE WITH TP FREE...........
Quote:
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port

Job ID: 0000000000E63E95
2021-04-20 11:13:13 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Error: Failed write ?BASE_VERLIST? partition
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ?1.2.4.1? Software version.

Job ID: 0000000000E643D8
2021-04-20 11:30:14 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 36V4C20623000470
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.365(IRLC555E9R1P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4.1? Software version.
2021-04-20 11:31:33 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ?1.2.4.1? Software version.
Your balance: 30 credit(s)
2021-04-20 11:32:15 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.365(IRLC555E9R1P3)?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4.1? Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-17-2021, 15:11   #155 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
https://www.youtube.com/watch?v=v7Jg...FO%2CTRAVELFIT

HuAWEI P30 LITE UNLOCK DONE WITH TESTPOINT FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.4?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 Intel(R) Active Management Technology - SOL
2: COM23 RIM Virtual Serial Port v2
3: COM24 RIM Virtual Serial Port v2
4: COM12 SAMSUNG Mobile USB Modem

Job ID: 0000000000F563FA
2021-05-04 15:42:58 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: JRQ4C19515001424
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.448(C431E13R2P7)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4? Software version.
2021-05-04 15:44:08 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ?1.2.4? Software version.
Your balance: 30 credit(s)
2021-05-04 15:44:39 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.448(C431E13R2P7)?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4? Software version.
  Reply With Quote
Old 05-17-2021, 15:11   #156 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
https://www.youtube.com/watch?v=v7Jg...FO%2CTRAVELFIT

HuAWEI P30 LITE UNLOCK DONE WITH TESTPOINT FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.4?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 Intel(R) Active Management Technology - SOL
2: COM23 RIM Virtual Serial Port v2
3: COM24 RIM Virtual Serial Port v2
4: COM12 SAMSUNG Mobile USB Modem

Job ID: 0000000000F563FA
2021-05-04 15:42:58 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: JRQ4C19515001424
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.448(C431E13R2P7)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4? Software version.
2021-05-04 15:44:08 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ?1.2.4? Software version.
Your balance: 30 credit(s)
2021-05-04 15:44:39 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.448(C431E13R2P7)?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4? Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-19-2021, 11:52   #157 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
https://www.youtube.com/watch?v=Xpv1...FO%2CTRAVELFIT
HuAWEI P30 PRO VOG-L09 LATEST 11 VERSION UNLOCK DONE WITH TESTPOINT FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.4?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 0000000000E89715
2021-04-22 10:52:06 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?VOG-L29?
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Canceling... Please be patient!

Connect canceled.
Performed by ?1.2.4? Software version.

Job ID: 0000000000E89744
2021-04-22 10:52:35 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?VOG-L29?
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ?1.2.4? Software version.

Job ID: 0000000000E89784
2021-04-22 10:53:29 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?VOG-L29?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 026AYU197C001101
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?VOG-L09?
System: ?VOG-L09 11.0.0.138(C431E8R2P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4? Software version.
2021-04-22 10:54:50 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?VOG-L29?
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ?1.2.4? Software version.
Your balance: 30 credit(s)
2021-04-22 10:55:15 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?VOG-L29?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?VOG-L09?
System: ?VOG-L09 11.0.0.138(C431E8R2P3)?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4? Software version.
  Reply With Quote
Old 05-19-2021, 12:09   #158 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
https://www.youtube.com/watch?v=E-lo...FO%2CTRAVELFIT
HUAWEI P40 LITE JNY-LX1 UNLOCK TESTPOINTS FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.5?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
2021-04-30 16:43:02 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?JNY-LX1?
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Found a fastboot device: UT7TSX206P046358
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?JNY-LX1?
System: ?JNY-L21 10.1.0.311(C432E1R5P1)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5? Software version.
2021-04-30 16:43:46 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ?JNY-LX1?
Username:
Warning: Invalid username

Reset Huawei ID failed.
Performed by ?1.2.5? Software version.
2021-04-30 16:43:47 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ?JNY-LX1?
Username:
Warning: Invalid username

Reset Huawei ID failed.
Performed by ?1.2.5? Software version.
Your balance: 30 credit(s)
2021-04-30 16:44:35 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ?JNY-LX1?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?JNY-LX1?
System: ?JNY-L21 10.1.0.311(C432E1R5P1)?
Resetting Huawei ID...
Formatting secure data...
Rebooting device...

Reset Huawei ID done.
Performed by ?1.2.5? Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-19-2021, 12:50   #159 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
https://www.youtube.com/watch?v=RnPu...FO%2CTRAVELFIT
HUAWEI Y6 2015 (SCL-L01) SIM NETWORK UNLOCK DONE FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.5?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM7 Intel(R) Active Management Technology - SOL
2: COM3 F5521gw Mobile Broadband Device Management
3: COM6 F5521gw Mobile Broadband GPS Port
4: COM4 F5521gw Mobile Broadband Device Management
5: COM5 F5521gw Mobile Broadband Modem Port
2021-05-14 09:36:33 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?SCL-L01?
Detected ?DBAdapter Reserved Interface? port
Connecting to server...
Authorization is successful

Device Model: ?SCL-L01?
Firmware: ?HL3SCALEM?
Boot: ?SCL-L01C432B170_BOOT?
System: ?SCL-L01C432B170_SYSTEM?
Recovery: ?SCL-L01C432B170_RECOVERY?
MEID: ?00000000000000?
PESN: ?00000000?
IMEI A: ?860711030478649?
IMEI B: ?860711030478649?
Bluetooth MAC: ?60:83:34:32:CC:65?
WiFi MAC: ?60:83:34:32:C8:68?
S/N: ?NQL7N16516000425?
Board S/N: ?7N3QVX165K069458?
Vendor Code: ?hw?
Country Code: ?eu?

Connect done.
Performed by ?1.2.5? Software version.
2021-05-14 09:37:05 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?SCL-L01?
Error: Read indices
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot

Direct Unlock done.
Performed by ?1.2.5? Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-22-2021, 12:13   #160 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
Huawei psmart fig-lx1 unlock done with tp.......
Quote:
welcome to octoplus huawei software v.‪1.2.4.3‬

to enable 'manufacture' mode dial
- for qualcomm and hisilicon based models: *#*#2846579#*#*
projectmenu > background settings > usb port settings > manufacture mode
- for mtk based models: *#*#14789632#*#*
projectmenu > background settings > usb port settings > debug mode

to enable 'fastboot' mode
1. Power off the phone. Remove sd and sim cards
2. Press 'vol-' and insert usb cable
3. Wait until phone enters 'fastboot' mode

to enable 'upgrade' mode
1. Power off the phone. Remove sd and sim cards
2. Press and hold 'vol-' and 'vol+' keys and insert usb cable
3. Wait until phone enters 'upgrade mode'

found com ports:
2021-05-22 11:10:04 gmt -------------------------------------------------
starting connect
selected phone model: ‪fig-lx1‬
searching huawei usb com 1.0 port...
Error: Huawei usb com 1.0 port not found
searching fastboot devices...
Canceling... Please be patient!

Connect canceled.
Performed by ‪1.2.4.3‬ software version.
2021-05-22 11:10:39 gmt -------------------------------------------------
starting connect
selected phone model: ‪fig-lx1‬
searching huawei usb com 1.0 port...
Error: Huawei usb com 1.0 port not found
searching fastboot devices...
Error: Fastboot devices not found

connect failed.
Performed by ‪1.2.4.3‬ software version.
2021-05-22 11:11:37 gmt -------------------------------------------------
starting connect
selected phone model: ‪fig-lx1‬
searching huawei usb com 1.0 port...
Detected ‪huawei usb com 1.0‬ port
writing bootloader kirin659_a8.0_v1...
Initializing remote service connection...
Writing ‪xloader‬ partition...
Writing ‪fastboot‬ partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: Hbe7n18c25002650
detected ‪android sooner single adb interface‬ port

device model: ‪fig-lx1‬
system: ‪fig-lx1 8.0.0.129(irlc368)‬
meid: ‪00000000000000‬
imei a: ‪862239043342501‬
imei b: ‪000000000000000‬
s/n: ‪hbe7n18c25002650‬
fb lock state: ‪unlocked‬
user lock state: ‪locked‬

connect done.
Performed by ‪1.2.4.3‬ software version.
2021-05-22 11:12:24 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪fig-lx1‬
saving backup of modem_secure...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file imeifile_i1.bin!
Error: Can't get file imeifile_i1.hash!
Writing modem_secure partition...
Rebooting device...

Direct unlock done.
Performed by ‪1.2.4.3‬ software version.
  Reply With Quote
Old 05-22-2021, 14:31   #161 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
Huawei psmart 2019 pot-lx1 unlock done with tp......
Quote:
starting connect
selected phone model: ‪pot-lx1‬
searching huawei usb com 1.0 port...
Detected ‪huawei usb com 1.0‬ port
writing bootloader kirin710_v1...
Initializing remote service connection...
Writing ‪xloader‬ partition...
Writing ‪uce‬ partition...
Writing ‪fastboot‬ partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: 6by4c19626000944
detected ‪android sooner single adb interface‬ port

device model: ‪pot-lx1‬
system: ‪pot-lx1 10.0.0.243(c555e9r1p3)‬
fb lock state: ‪locked‬
user lock state: ‪locked‬

connect done.
Performed by ‪1.2.4.3‬ software version.
2021-05-22 13:28:48 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪pot-lx1‬
username:
Warning: Invalid username

direct unlock failed.
Performed by ‪1.2.4.3‬ software version.
Your balance: 30 credit(s)
2021-05-22 13:29:33 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪pot-lx1‬
username: Octoplus888
connecting to the credit server...
Checking balance...
Your balance: 30 credits
sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
Fb lock state: ‪unlocked‬
user lock state: ‪locked‬

device model: ‪pot-lx1‬
system: ‪pot-lx1 10.0.0.243(c555e9r1p3)‬
meid: ‪00000000000000‬
imei a: ‪868188044218679‬
imei b: ‪000000000000000‬
s/n: ‪6by4c19626000944‬
saving backup of modem_secure...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct unlock done.
Performed by ‪1.2.4.3‬ software version.
  Reply With Quote
The Following 2 Users Say Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-28-2021, 11:18   #162 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
HuAWEI P30 LITE MAR-LX1A UNLOCK DONE WITH TP FREE
Quote:
Welcome to Octoplus Huawei Software v.?1.2.4.3?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
Your balance: 30 credit(s)
2021-05-27 15:44:06 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!

ON/OFF Factory Mode failed.
Performed by ?1.2.4.3? Software version.
2021-05-27 15:44:29 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Error: Failed write ?BASE_VERLIST? partition
Canceling... Please be patient!
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ?1.2.4.3? Software version.
2021-05-27 15:49:05 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: JRQ0219C23001376
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.435(IRLC555E9R1P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4.3? Software version.
2021-05-27 15:50:19 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.435(IRLC555E9R1P3)?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4.3? Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 05-28-2021, 16:06   #163 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
HuAWEI P30 PRO VOG-L09 LATEST 11 VERSION UNLOCK DONE WITH TESTPOINT FREE
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.4.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
2021-05-28 14:58:32 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪VOG-L29‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Your balance: 30 credit(s)
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 026AYU1945000941
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4.3‬ Software version.
2021-05-28 14:59:48 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪VOG-L29‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...

Direct Unlock failed.
Performed by ‪1.2.4.3‬ Software version.
2021-05-28 15:01:38 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪VOG-L29‬
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Found a fastboot device: 롳v聆শ䏘ଐ頻শ
Detected ‪Android Sooner Single ADB Interface‬ port

Connect failed.
Performed by ‪1.2.4.3‬ Software version.
2021-05-28 15:03:08 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪VOG-L29‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 026AYU1945000941
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.4.3‬ Software version.
2021-05-28 15:04:31 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪VOG-L29‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.4.3‬ Software version.
  Reply With Quote
Old 05-28-2021, 20:01   #164 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
Huawei p9 lite vns-l23 unlock donwvia manufacture mode
Quote:
starting connect
selected phone model: ‪vns-l23‬
detected ‪android adapter pcui‬ port
warning: Can't get serial number.
Warning: Can't get device model.
Warning: Can't get imei/mac info.
Connecting to server...
Authorization is successful
reading basic data...
Reading secure data...

Device model: ‪vns-l11‬
firmware: ‪nrd90m test-keys‬
boot: ‪dallas-trunk_boot‬
fastboot: ‪chipset-dallas 5.0.0.1(0fn2)_fastboot‬
system: ‪system 5.0.0.57(1tuc)‬
recovery: ‪(unknow)‬
meid: ‪00000000000000‬
pesn: ‪00000000‬
imei a: ‪863047035814422‬
imei b: ‪863047035814422‬
bluetooth mac: ‪f0:43:47:24:30:f0‬
wifi mac: ‪f0:43:47:24:26:f4‬
s/n: ‪4te7n16a26009158‬
board s/n: ‪7n4aup16an015012‬
vendor code: ‪vodafone‬
country code: ‪pt‬

connect done.
Performed by ‪1.2.4.3‬ software version.
2021-05-28 18:58:53 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪vns-l23‬
reading basic data...
Reading secure data...
Writing public keys...
Identifying security...
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot

direct unlock done.
Performed by ‪1.2.4.3‬ software version.
  Reply With Quote
The Following 2 Users Say Thank You to AbDuLlAH kHaWaR For This Useful Post:
Old 06-01-2021, 15:23   #165 (permalink)
No Life Poster
 
AbDuLlAH kHaWaR's Avatar
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,160
Member: 1442994
Status: Offline
Thanks Meter: 406
vns-l23 frp done in fastboot mode.. thanks octoplus team
Quote:
Reset FRP (Fastboot Mode) failed.
Performed by ‪1.2.4.3‬ Software version.
2021-06-01 14:22:22 GMT -------------------------------------------------
Starting Reset FRP (Fastboot Mode)
Selected phone model: ‪VNS-L23‬
Searching Fastboot devices...
Found a fastboot device: 9JT4C16B25002993
System: ‪VNS-L21C150B130‬
IMEI A: ‪860918033588619‬
S/N: ‪9JT4C16B25002993‬
Connecting to server...
Writing Reset FRP data...

Reset FRP (Fastboot Mode) done.
Performed by ‪1.2.4.3‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to AbDuLlAH kHaWaR For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 21:46.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.31658 seconds with 7 queries

SEO by vBSEO