P30 ele-l09 unlock first with octoplus

[AbDuLlAH kHaWaR]

Huawei p30 lite unlock done with tp............

welcome to octoplus huawei software v.‪1.2.4‬

to enable 'manufacture' mode dial
- for qualcomm and hisilicon based models: *#*#2846579#*#*
projectmenu > background settings > usb port settings > manufacture mode
- for mtk based models: *#*#14789632#*#*
projectmenu > background settings > usb port settings > debug mode

to enable 'fastboot' mode
1. Power off the phone. Remove sd and sim cards
2. Press 'vol-' and insert usb cable
3. Wait until phone enters 'fastboot' mode

to enable 'upgrade' mode
1. Power off the phone. Remove sd and sim cards
2. Press and hold 'vol-' and 'vol+' keys and insert usb cable
3. Wait until phone enters 'upgrade mode'

found com ports:
1: Com13 standard serial over bluetooth link
2: Com11 standard serial over bluetooth link
3: Com12 standard serial over bluetooth link
4: Com10 standard serial over bluetooth link

job id: 000000000112bb0a
2021-06-01 15:28:13 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: ‪mar-lx1a‬
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode connect the phone in factory mode or factory fastboot mode!
Error: No devices to on/off factory mode!

On/off factory mode failed.
Performed by ‪1.2.4‬ software version.

Job id: 000000000112bb7d
2021-06-01 15:29:31 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: ‪mar-lx1a‬
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode connect the phone in factory mode or factory fastboot mode!
Error: No devices to on/off factory mode!

On/off factory mode failed.
Performed by ‪1.2.4‬ software version.

Job id: 000000000112bc50
2021-06-01 15:31:43 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: ‪mar-lx1a‬
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode connect the phone in factory mode or factory fastboot mode!
Error: No devices to on/off factory mode!

On/off factory mode failed.
Performed by ‪1.2.4‬ software version.

Job id: 000000000112bce1
2021-06-01 15:33:06 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: ‪mar-lx1a‬
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode connect the phone in factory mode or factory fastboot mode!
Checking the existence of the auto firmware file...
Performing on factory mode operation...
Checking firmware package type
initializing remote service connection...
Downloading patch files from the server...
Searching device in upgrade mode...
Detected ‪dbadapter reserved interface‬ port
connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪sha256rsa‬ partition...
Writing ‪crc‬ partition...
Writing ‪base_verlist‬ partition...
Error: Failed write ‪base_verlist‬ partition
canceling... Please be patient!
Checking firmware package type
warning: Switching your device to factory mode is not possible! Please, connect your device via test point and perform the desired operation.

On/off factory mode failed.
Performed by ‪1.2.4‬ software version.

Job id: 000000000112bff0
2021-06-01 15:40:59 gmt -------------------------------------------------
starting connect
selected phone model: ‪mar-lx1a‬
searching huawei usb com 1.0 port...
Detected ‪huawei usb com 1.0‬ port
writing bootloader kirin710_v1...
Initializing remote service connection...
Writing ‪xloader‬ partition...
Writing ‪uce‬ partition...
Writing ‪fastboot‬ partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: Jrqdu20220000645
detected ‪android sooner single adb interface‬ port

device model: ‪mar-lx1a‬
system: ‪mar-l01a 10.0.0.448(c431e13r2p7)‬
fb lock state: ‪locked‬
user lock state: ‪locked‬

connect done.
Performed by ‪1.2.4‬ software version.
2021-06-01 15:42:11 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪mar-lx1a‬
username: Octoplus888
connecting to the credit server...
Checking balance...
Your balance: 30 credits
sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
Fb lock state: ‪unlocked‬
user lock state: ‪locked‬

device model: ‪mar-lx1a‬
system: ‪mar-l01a 10.0.0.448(c431e13r2p7)‬
saving backup of modem_secure...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct unlock done.
Performed by ‪1.2.4‬ software version.

[AbDuLlAH kHaWaR]

Huawei psmart fig-lx1 unlock with tp free............

device model: ‪fig-lx1‬
system: ‪fig-lx1 8.0.0.138(c02)‬
meid: ‪00000000000000‬
imei a: ‪865878039708691‬
imei b: ‪000000000000000‬
s/n: ‪hbedu18502007366‬
fb lock state: ‪unlocked‬
user lock state: ‪locked‬

connect done.
Performed by ‪1.2.5‬ software version.
2021-06-04 16:48:17 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪fig-lx1‬
connecting to server...
Saving backup of modem_secure...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file imeifile_i1.bin!
Error: Can't get file imeifile_i1.hash!
Writing modem_secure partition...
Rebooting device...

Direct unlock done.
Performed by ‪1.2.5‬ software version.

[AbDuLlAH kHaWaR]

Huawei psmart fig-lx1 unlock with tp free............

device model: ‪fig-lx1‬
system: ‪fig-lx1 8.0.0.138(c02)‬
meid: ‪00000000000000‬
imei a: ‪865878039708691‬
imei b: ‪000000000000000‬
s/n: ‪hbedu18502007366‬
fb lock state: ‪unlocked‬
user lock state: ‪locked‬

connect done.
Performed by ‪1.2.5‬ software version.
2021-06-04 16:48:17 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪fig-lx1‬
connecting to server...
Saving backup of modem_secure...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file imeifile_i1.bin!
Error: Can't get file imeifile_i1.hash!
Writing modem_secure partition...
Rebooting device...

Direct unlock done.
Performed by ‪1.2.5‬ software version.

[AbDuLlAH kHaWaR]

psmart 2019 pot-lx1 unlock done with tp free.................

Welcome to Octoplus Huawei Software v.‪1.2.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 Intel(R) Active Management Technology - SOL
2: COM1 Communications Port
2021-06-04 20:10:30 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Error: Failed write ‪BASE_VERLIST‬ partition
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Error: No devices in Upgarde mode found
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.5‬ Software version.
2021-06-04 20:13:33 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Your balance: 30 credit(s)
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY4C19809004108
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C431E9R2P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5‬ Software version.
2021-06-04 20:14:51 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C431E9R2P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5‬ Software version.

[AbDuLlAH kHaWaR]

psmart 2019 pot-lx1 unlock done with tp free.................

Welcome to Octoplus Huawei Software v.‪1.2.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 Intel(R) Active Management Technology - SOL
2: COM1 Communications Port
2021-06-04 20:10:30 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Error: Failed write ‪BASE_VERLIST‬ partition
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Error: No devices in Upgarde mode found
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.5‬ Software version.
2021-06-04 20:13:33 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Your balance: 30 credit(s)
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY4C19809004108
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C431E9R2P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5‬ Software version.
2021-06-04 20:14:51 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C431E9R2P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5‬ Software version.

[AbDuLlAH kHaWaR]

HUAWEI MaTE 20 LITE SNE-LX1 UNLOCK DONE FREE WITH TP

Job ID: 00000000011BB2F0
2021-06-09 15:06:29 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪SNE-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: HVY0219402000619
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪SNE-LX1‬
System: ‪SNE-LX1 10.0.0.279(C432E10R1P1)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-06-09 15:07:37 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪SNE-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪SNE-LX1‬
System: ‪SNE-LX1 10.0.0.279(C432E10R1P1)‬
MEID: ‪00000000000000‬
IMEI A: ‪869328039793364‬
IMEI B: ‪000000000000000‬
S/N: ‪HVY0219402000619‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.

[AbDuLlAH kHaWaR]

https://www.youtube.com/watch?v=FXmk...FO%2CTRAVELFIT
(GSM INFO) HUAWEI NOVA 7 SE 5G (CDY-AN20) HUAWEI ID REMOVED OCTOPLUS (FIT)

2021-05-03 15:21:09 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?CDY-AN90?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN820_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Writing ?BL2? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5? Software version.
2021-05-03 15:22:57 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ?CDY-AN90?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
MEID: ?A00000BA6E0C07?
IMEI A: ?868729059938675?
IMEI B: ?865049050006684?
Resetting Huawei ID...
Formatting secure data...
Rebooting device...

Reset Huawei ID done.
Performed by ?1.2.5? Software version.

[AbDuLlAH kHaWaR]

https://www.youtube.com/watch?v=ynub...FO%2CTRAVELFIT
(GSM INFO) HUAWEI NOVA 7 SE 5G (CDY-AN20) FRP GMAIL ACCOUNT REMOVED OCTOPLUS (FIT)

Welcome to Octoplus Huawei Software v.?1.2.5?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2021-05-03 14:55:07 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!

ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:55:31 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!

ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:55:56 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!

ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:57:22 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Error: Resource file does not exist
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:57:36 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-NX9?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Error: Resource file does not exist
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:58:41 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-NX9?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Error: Resource file does not exist
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 15:11:17 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?CDY-AN90?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN820_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Writing ?BL2? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5? Software version.
2021-05-03 15:12:41 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ?CDY-AN90?
Username:
Warning: Invalid username

Reset FRP (Factory Mode) failed.
Performed by ?1.2.5? Software version.
Your balance: 30 credit(s)
2021-05-03 15:13:26 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ?CDY-AN90?
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found

Reset FRP (Factory Mode) failed.
Performed by ?1.2.5? Software version.
2021-05-03 15:14:48 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ?CDY-AN90?
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN820_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Writing ?BL2? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF

Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
MEID: ?A00000BA6E0C07?
IMEI A: ?868729059938675?
IMEI B: ?865049050006684?
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ?1.2.5? Software version.

[AbDuLlAH kHaWaR]

Huawei p smart 2018 fig-lx1 unlock done with tp...

welcome to octoplus huawei software v.‪1.2.4.1‬

to enable 'manufacture' mode dial
- for qualcomm and hisilicon based models: *#*#2846579#*#*
projectmenu > background settings > usb port settings > manufacture mode
- for mtk based models: *#*#14789632#*#*
projectmenu > background settings > usb port settings > debug mode

to enable 'fastboot' mode
1. Power off the phone. Remove sd and sim cards
2. Press 'vol-' and insert usb cable
3. Wait until phone enters 'fastboot' mode

to enable 'upgrade' mode
1. Power off the phone. Remove sd and sim cards
2. Press and hold 'vol-' and 'vol+' keys and insert usb cable
3. Wait until phone enters 'upgrade mode'

found com ports:

Job id: 00000000011df1a4
2021-06-11 14:20:43 gmt -------------------------------------------------
starting connect
selected phone model: ‪fig-lx1‬
no devices in manufacture mode found

connect failed.
Performed by ‪1.2.4.1‬ software version.

Job id: 00000000011df1ac
2021-06-11 14:20:52 gmt -------------------------------------------------
starting connect
selected phone model: ‪fig-lx1‬
searching huawei usb com 1.0 port...
Detected ‪huawei usb com 1.0‬ port
writing bootloader kirin659_a8.0_v1...
Initializing remote service connection...
Writing ‪xloader‬ partition...
Writing ‪fastboot‬ partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: Hbedu18b12001279
detected ‪android sooner single adb interface‬ port

device model: ‪fig-lx1‬
system: ‪fig-lx1 9.1.0.206(c782e9r1p5)‬
meid: ‪00000000000000‬
imei a: ‪862239041141236‬
imei b: ‪000000000000000‬
s/n: ‪hbedu18b12001279‬
fb lock state: ‪unlocked‬
user lock state: ‪locked‬

connect done.
Performed by ‪1.2.4.1‬ software version.
2021-06-11 14:21:41 gmt -------------------------------------------------
starting direct unlock
selected phone model: ‪fig-lx1‬
saving backup of modem_secure...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file imeifile_i1.bin!
Error: Can't get file imeifile_i1.hash!
Writing modem_secure partition...
Rebooting device...

Direct unlock done.
Performed by ‪1.2.4.1‬ software version.

[AbDuLlAH kHaWaR]

Huawei psmart 2019 pot-lx1 unlock done with TP FREE

Welcome to Octoplus Huawei Software v.‪1.2.5.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM6 HUAWEI Mobile Connect - Fake Acm Interface
2: COM7 Android Adapter PCUI
3: COM8 DBAdapter Reserved Interface

Job ID: 0000000001226F0A
2021-06-15 17:13:40 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪POT-LX1‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Initializing remote service connection...
Downloading patch files from the server...
Downloading additional resources...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Error: Failed write ‪BASE_VERLIST‬ partition
Checking firmware package type
Searching device in Upgrade mode...
Error: No devices in Upgarde mode found
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.5.3‬ Software version.

Job ID: 00000000012272D9
2021-06-15 17:24:55 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading additional resources...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 6BY7N19301003075
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C432E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-06-15 17:26:18 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.5.3‬ Software version.
Your balance: 30 credit(s)
2021-06-15 17:27:12 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C432E9R1P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.

[AbDuLlAH kHaWaR]

HuAWEI P30 LITE MAR-LX1A UNLOCK DONE WITHOUT TP FREE

Welcome to Octoplus Huawei Software v.?1.2.5?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM2 Communications Port
3: COM3 HUAWEI Mobile Connect - Fake Acm Interface
4: COM4 Android Adapter PCUI
5: COM5 DBAdapter Reserved Interface
Your balance: 30 credit(s)
2021-06-14 13:20:22 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Writing ?PACKAGE_TYPE? partition...
Writing ?XLOADER? partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ?1.2.5? Software version.
2021-06-14 13:21:13 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ?1.2.5? Software version.
2021-06-14 13:22:08 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ?1.2.5? Software version.
2021-06-14 13:24:00 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Error: Failed to open COM port COM6
Error: Connecting to COM6 failed
Searching Fastboot devices...
Error: Fastboot devices not found

Connect failed.
Performed by ?1.2.5? Software version.
2021-06-14 13:24:40 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MAR-LX1A?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 36V4C20813002250
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.268(IRLC555E7R1P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5? Software version.
2021-06-14 13:26:10 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MAR-LX1A?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.268(IRLC555E7R1P3)?
MEID: ?00000000000000?
IMEI A: ?864627040399870?
IMEI B: ?000000000000000?
S/N: ?36V4C20813002250?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.5? Software version.
2021-06-14 13:28:07 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MAR-LX1A?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 36V4C20813002250
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?MAR-LX1A?
System: ?MAR-L01A 10.0.0.268(IRLC555E7R1P3)?
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ?1.2.5? Software version.

[AbDuLlAH kHaWaR]

https://www.youtube.com/watch?v=WiEg...FO%2CTRAVELFIT
HUAWEI PSMART 2019 (POT-LX1) SIM NETWORK UNLOCK OCTOPUS (FIT)

Welcome to Octoplus Huawei Software v.?1.2.4.3?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM7 DBAdapter Reserved Interface
2: COM8 HUAWEI Mobile Connect - Fake Acm Interface
3: COM9 Android Adapter PCUI
2021-05-18 11:29:18 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?POT-LX1?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: File is not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Error: Failed write ?BASE_VERLIST? partition
Canceling... Please be patient!
Checking firmware package type
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ?1.2.4.3? Software version.
2021-05-18 11:38:41 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?POT-LX1?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY4C19B29000248
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?POT-LX1?
System: ?POT-LX1 10.0.0.296(C431E9R4P1)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.4.3? Software version.
2021-05-18 11:39:50 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?POT-LX1?
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ?1.2.4.3? Software version.
Your balance: 30 credit(s)
2021-05-18 11:40:30 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?POT-LX1?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?POT-LX1?
System: ?POT-LX1 10.0.0.296(C431E9R4P1)?
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.4.3? Software version.

[AbDuLlAH kHaWaR]

https://www.youtube.com/watch?v=wGgm...FO%2CTRAVELFIT
(GSM INFO) HUAWEI Y6 2017 (MYA-L11) SIM NETWORK UNLOCK OCTPLUS (FIT)

Welcome to Octoplus Huawei Software v.?1.2.4?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 000000000103B0E5
2021-05-18 17:01:07 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MYA-L11?
Searching devices in META mode
Please Power off the phone and insert USB cable
Canceling... Please be patient!
MTK Preloader COM port is not found

Connect canceled.
Performed by ?1.2.4? Software version.

Job ID: 000000000103B193
2021-05-18 17:03:32 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MYA-L11?
Searching devices in META mode
Please Power off the phone and insert USB cable
MTK Preloader COM port is not found

Connect failed.
Performed by ?1.2.4? Software version.

Job ID: 000000000103B1B1
2021-05-18 17:03:58 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MYA-L11?
Searching devices in META mode
Please Power off the phone and insert USB cable
Detected ?MediaTek PreLoader USB VCOM (Android)? port
Switching device to MTK META mode
Send para V1 OK!
Waiting for device loading
Canceling... Please be patient!
MTK META failed to load in time. Please reconnect

Connect canceled.
Performed by ?1.2.4? Software version.

Job ID: 000000000103B1C8
2021-05-18 17:04:16 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MYA-L11?
Please Power off the phone and insert USB cable
MTK Preloader COM port is not found

Connect failed.
Performed by ?1.2.4? Software version.

Job ID: 000000000103B3FB
2021-05-18 17:11:28 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MYA-L11?
Please Power off the phone and insert USB cable
MTK Preloader COM port is not found

Connect failed.
Performed by ?1.2.4? Software version.

Job ID: 000000000103B41D
2021-05-18 17:11:54 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MYA-L11?
Please Power off the phone and insert USB cable
Detected ?MediaTek PreLoader USB VCOM (Android)? port

Detecting Chip Version...
HW Chip : MT6737T
HW Version : 8A00.CA00.0000.0000
Brom Version: FF
Boot Loader Version: 01
Initializing remote service connection...
Downloading Download Agent data...
Using MTK_AllInOne_DA_v3.3001.00.00 download agent...
Found a suitable Download agent.
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: 15010051.4531334D.420DF41A.6ADCB7FB
eMMC Flash: Samsung: QE13MB
DA ver : 4.2.93
Initializing Memory Flash...
Initialization completed
Sending Loader...
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 14910 Mb
Internal RAM size : 128 Kb
External RAM size : 2048 Mb
IMEI A: ?862665038308216?
IMEI B: ?????????????????
Bluetooth MAC: ?B0:55:08:64:35:99?
WiFi MAC: ?B0:55:08:72:6B:64?

Connect done.
Performed by ?1.2.4? Software version.
2021-05-18 17:12:24 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?MYA-L11?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!

ON/OFF Factory Mode is not supported for this device.
Performed by ?1.2.4? Software version.

Job ID: 000000000103B454
2021-05-18 17:12:36 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?MYA-L11?
Searching devices in META mode
Please Power off the phone and insert USB cable
Detected ?MediaTek PreLoader USB VCOM (Android)? port
Switching device to MTK META mode
Send para V1 OK!
Waiting for device loading
BaseBand chip: MT6737T,S01
S/W version: Maya-L11C368B122
H/W board version: S01
BaseBand chip: ?MT6735, E00?
S/W version: ?MOLY.LR9.W1444.MD.LWTG.MP.V94.P66?
H/W board version: ?HQ6737T_66_1HA_M0_HW?
IMEI A: ?862665038308216?
IMEI B: ?FFFFFFFFFFFFFFF?

Connect done.
Performed by ?1.2.4? Software version.
2021-05-18 17:13:05 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?MYA-L11?
Reading mddb from target
Reading sim lock info...
Writing unlock data. Step 1
Writing unlock data. Step 2
Writing unlock data. Step 1
Writing unlock data. Step 2

Direct Unlock done.
Performed by ?1.2.4? Software version.

[AbDuLlAH kHaWaR]

Psmart 2019 pot-lx1 unlock done with TP free

Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19418001949
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C432E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5‬ Software version.
2021-06-21 13:11:48 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.299(C432E9R1P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5‬ Software version.

[AbDuLlAH kHaWaR]

HuAWEI P30 LITE MAR-LX1 UNLOCK DONE WITH TP

Job ID: 000000000129C6AB
2021-06-22 13:38:53 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪MAR-LX1A‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 36V4C20813002277
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.435(IRLC555E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-06-22 13:40:01 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪MAR-LX1A‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.5.3‬ Software version.
Your balance: 30 credit(s)
2021-06-22 13:40:31 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪MAR-LX1A‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.435(IRLC555E9R1P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.