P30 ele-l09 unlock first with octoplus - Page 13 - GSM-Forum

AbDuLlAH kHaWaR · 06-22-2021, 14:45

HuAWEI P30 LITE MAR-LX1 UNLOCK DONE WITH TP

Quote:

Job ID: 000000000129C6AB
2021-06-22 13:38:53 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪MAR-LX1A‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 36V4C20813002277
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.435(IRLC555E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-06-22 13:40:01 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪MAR-LX1A‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.5.3‬ Software version.
Your balance: 30 credit(s)
2021-06-22 13:40:31 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪MAR-LX1A‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.435(IRLC555E9R1P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.

AbDuLlAH kHaWaR · 06-23-2021, 10:36

HuAWEI P9 LITE vns-l31 UNLOCK DONE WITH MANUFACTURE MODE FREE

Quote:

Starting Connect
Selected phone model: ‪VNS-L31‬
Detected ‪Android Adapter PCUI‬ port
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...

Device Model: ‪VNS-L11‬
Firmware: ‪NRD90M test-keys‬
Boot: ‪Dallas-Trunk_BOOT‬
Fastboot: ‪Chipset-dallas 5.0.0.1(0ENW)_FASTBOOT‬
System: ‪System 5.0.0.57(1H4A)‬
Recovery: ‪(unknow)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪860921031317718‬
IMEI B: ‪860921031317718‬
Bluetooth MAC: ‪E0:A3:AC:BD:EB

2‬
WiFi MAC: ‪E0:A3:AC:BD:E9:74‬
S/N: ‪4TE7N16511006747‬
Board S/N: ‪7N3RUP1659009914‬
Vendor Code: ‪vodafone‬
Country Code: ‪pt‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-06-23 09:31:44 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪VNS-L31‬
Reading basic data...
Reading secure data...
Writing public keys...
Identifying security...
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.

AbDuLlAH kHaWaR · 06-29-2021, 12:55

https://www.youtube.com/watch?v=AEr4...FO%2CTRAVELFIT
(GSM INFO) HUAWEI MATE 10 PRO (BLA-L09) FRP GMAIL ACCOUNT REMOVE OCTOPLUS (FIT)

Quote:

2021-06-15 11:00:57.170 Loading application settings
2021-06-15 11:00:57.218 Refreshing serial ports list
2021-06-15 11:00:57.312 Found COM ports:
2021-06-15 11:00:57.313 1: COM3 DBAdapter Reserved Interface
2021-06-15 11:00:57.314 2: COM4 HUAWEI Mobile Connect - Fake Acm Interface
2021-06-15 11:00:57.314 3: COM5 Android Adapter PCUI
2021-06-15 11:00:58.426 Welcome to Octoplus Huawei Software v.1.2.5
2021-06-15 11:00:58.427
2021-06-15 11:00:58.427 To enable 'Manufacture' mode dial
2021-06-15 11:00:58.428 - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2021-06-15 11:00:58.430 ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2021-06-15 11:00:58.430 - for MTK based models: *#*#14789632#*#*
2021-06-15 11:00:58.431 ProjectMenu > Background Settings > USB Port Settings > Debug Mode
2021-06-15 11:00:58.432
2021-06-15 11:00:58.432 To enable 'Fastboot' mode
2021-06-15 11:00:58.433 1. Power off the phone. Remove SD and SIM cards
2021-06-15 11:00:58.434 2. Press 'Vol-' and insert USB cable
2021-06-15 11:00:58.434 3. Wait until phone enters 'Fastboot' mode
2021-06-15 11:00:58.435
2021-06-15 11:00:58.436 To enable 'Upgrade' mode
2021-06-15 11:00:58.436 1. Power off the phone. Remove SD and SIM cards
2021-06-15 11:00:58.437 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2021-06-15 11:00:58.438 3. Wait until phone enters 'Upgrade mode'
2021-06-15 11:01:00.453 Refreshing serial ports list
2021-06-15 11:01:00.468 Found COM ports:
2021-06-15 11:01:00.469 1: COM3 DBAdapter Reserved Interface
2021-06-15 11:01:00.470 2: COM4 HUAWEI Mobile Connect - Fake Acm Interface
2021-06-15 11:01:00.471 3: COM5 Android Adapter PCUI
2021-06-15 11:01:00.645 Init finished
2021-06-15 11:01:34.675 2021-06-15 11:01:34 GMT -------------------------------------------------
2021-06-15 11:01:34.684 Starting ON/OFF Factory Mode
2021-06-15 11:01:34.689 Selected phone model: BLA-L09
2021-06-15 11:01:34.716 To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
2021-06-15 11:01:34.736 To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
2021-06-15 11:01:34.828 Checking the existence of the auto firmware file...
2021-06-15 11:01:34.840 Resource file does not exist
2021-06-15 11:01:36.918 Performing ON Factory Mode operation...
2021-06-15 11:01:36.924 Checking firmware package type
2021-06-15 11:01:36.930 Initializing remote service connection...
2021-06-15 11:01:36.936 Downloading patch files from the server...
2021-06-15 11:01:36.941 Resource file does not exist
2021-06-15 11:01:36.947 Resource file does not exist
2021-06-15 11:01:36.954 Searching device in Upgrade mode...
2021-06-15 11:01:36.972 Refreshing serial ports list
2021-06-15 11:01:36.983 Found COM ports:
2021-06-15 11:01:36.985 1: COM3 DBAdapter Reserved Interface
2021-06-15 11:01:36.985 2: COM4 HUAWEI Mobile Connect - Fake Acm Interface
2021-06-15 11:01:36.985 3: COM5 Android Adapter PCUI
2021-06-15 11:01:36.985 Detected DBAdapter Reserved Interface port
2021-06-15 11:01:36.993 Connecting to phone..
2021-06-15 11:01:37.000 Phone connect successfully!
2021-06-15 11:01:37.006 Writing firmware partitions...
2021-06-15 11:01:37.012 Writing SHA256RSA partition...
2021-06-15 11:01:38.239 Writing CRC partition...
2021-06-15 11:01:39.532 Writing BASE_VERLIST partition...
2021-06-15 11:01:40.664 Writing PACKAGE_TYPE partition...
2021-06-15 11:01:41.954 Writing XLOADER partition...
2021-06-15 11:01:43.241
2021-06-15 11:01:46.764 Firmware writing successfully completed
2021-06-15 11:01:46.772
2021-06-15 11:01:46.781 ON/OFF Factory Mode done.
2021-06-15 11:01:46.788 Performed by 1.2.5 Software version.
2021-06-15 11:02:07.157 2021-06-15 11:02:07 GMT -------------------------------------------------
2021-06-15 11:02:07.171 Starting Reset FRP (Factory Mode)
2021-06-15 11:02:07.180 Selected phone model: BLA-L09
2021-06-15 11:02:07.194 Searching HUAWEI USB COM 1.0 port...
2021-06-15 11:02:07.260 Refreshing serial ports list
2021-06-15 11:02:07.263 Found COM ports:
2021-06-15 11:02:07.264 1: COM6 HUAWEI USB COM 1.0
2021-06-15 11:02:07.264 Detected HUAWEI USB COM 1.0 port
2021-06-15 11:02:07.273 Writing bootloader KIRIN970_A8.1_V0...
2021-06-15 11:02:07.283 Initializing remote service connection...
2021-06-15 11:02:07.537 Writing XLOADER partition...
2021-06-15 11:02:09.333 Writing UCE partition...
2021-06-15 11:02:26.921 Writing FASTBOOT partition...
2021-06-15 11:02:45.994 Bootloader Update successfully
2021-06-15 11:02:46.011 Rebooting to fastboot mode...
2021-06-15 11:02:46.055 Searching Fastboot devices...
2021-06-15 11:02:52.192 Total interfaces: 1
2021-06-15 11:02:52.192 Interface 0 : flags: 1, name(79): \\?\usb#vid_18d1&pid_d00d#5&216db789&0&7#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
2021-06-15 11:02:52.202 Found a fastboot device: GAB7N18201015985
2021-06-15 11:02:52.334 Reading product model
2021-06-15 11:02:54.630 Reading serial number
2021-06-15 11:02:55.060 Response contains FAIL!
2021-06-15 11:02:55.060 Reading serial number failed
2021-06-15 11:02:57.066 Reading build number
2021-06-15 11:02:59.500 Device Model: BLA-L09
2021-06-15 11:02:59.513 System: BLA-L09 10.0.0.182(C782E6R1P3)
2021-06-15 11:02:59.524 Writing FRP partition..
2021-06-15 11:03:00.357 Response contains FAIL!
2021-06-15 11:03:10.367 Writing 0xC1000 frp data failed!
2021-06-15 11:03:12.036
2021-06-15 11:03:12.053 Reset FRP (Factory Mode) done.
2021-06-15 11:03:12.069 Performed by 1.2.5 Software version.

AbDuLlAH kHaWaR · 06-29-2021, 13:29

https://www.youtube.com/watch?v=rS7w...FO%2CTRAVELFIT
(GSMI INFO) HUAWEI P20 PRO (CLT-L09) SIM NETWORK UNLOCK OCTOPLUS (FIT)

Quote:

Welcome to Octoplus Huawei Software v.?1.2.5?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 HDA CX11270 Soft Modem
Your balance: 30 credit(s)

Found COM ports:
1: COM8 HUAWEI Mobile Connect - Fake Acm Interface
2: COM6 Android Adapter PCUI
3: COM7 DBAdapter Reserved Interface
4: COM3 HDA CX11270 Soft Modem

Found COM ports:
1: COM8 HUAWEI Mobile Connect - Fake Acm Interface
2: COM6 Android Adapter PCUI
3: COM7 DBAdapter Reserved Interface
4: COM3 HDA CX11270 Soft Modem

Found COM ports:
1: COM8 HUAWEI Mobile Connect - Fake Acm Interface
2: COM6 Android Adapter PCUI
3: COM7 DBAdapter Reserved Interface
4: COM3 HDA CX11270 Soft Modem
2021-06-07 11:24:17 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CLT-L09?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Error: Resource file does not exist
Error: Resource file does not exist
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Writing ?PACKAGE_TYPE? partition...
Writing ?XLOADER? partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ?1.2.5? Software version.
2021-06-07 11:25:05 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?CLT-L09?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN970_A8.1_V0...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: LCL7N18B21007493
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?CLT-L09?
System: ?CLT-L09 9.1.0.345(C432E8R1P11)?
MEID: ?A000009C857638?
IMEI A: ?869312040052929?
IMEI B: ?869312040052929?
S/N: ?LCL7N18B21007493?
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5? Software version.
2021-06-07 11:26:17 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?CLT-L09?
Saving backup of MODEM_SECURE...
Connecting to server...
Initializing remote service connection...
Downloading unlock patch files...
Writing MODEM_SECURE partition...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.5? Software version.

AbDuLlAH kHaWaR · 06-29-2021, 14:26

https://www.youtube.com/watch?v=bMfY...FO%2CTRAVELFIT
(GSM INFO) HUAWEI P20 (EML-L09) SIM NETWORK UNLOCK OCTOPLUS (FIT)

Quote:

Welcome to Octoplus Huawei Software v.?1.2.5.3?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM11 Standard Serial over Bluetooth link
2: COM15 HUAWEI USB COM 1.0
3: COM10 Standard Serial over Bluetooth link

Job ID: 00000000011DC93C
2021-06-11 11:48:53 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?EML-L09?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN970_A8.1_V0...
Initializing remote service connection...
Downloading additional resources...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: BPN0218424000064
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?EML-L09?
System: ?EML-L09 10.0.0.185(C432E8R1P3)?
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5.3? Software version.
2021-06-11 11:50:01 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?EML-L09?
Saving backup of MODEM_SECURE...
Connecting to server...
Initializing remote service connection...
Downloading unlock patch files...
Downloading additional resources...
Writing MODEM_SECURE partition...
Rebooting device...

Direct Unlock done.
Performed by ?1.2.5.3? Software version.

AbDuLlAH kHaWaR · 06-30-2021, 17:39

HuAWEI P9 LITE vns-l31 UNLOCK DONE WITH MANUFACTURE MODE FREE

Quote:

Welcome to Octoplus Huawei Software v.‪1.2.5.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 F5521gw Mobile Broadband Device Management
2: COM4 F5521gw Mobile Broadband Device Management
3: COM7 Intel(R) Active Management Technology - SOL
4: COM6 F5521gw Mobile Broadband GPS Port
5: COM5 F5521gw Mobile Broadband Modem Port

Job ID: 0000000001334D57
2021-06-30 16:23:07 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪VNS-L31‬
Detected ‪Android Adapter PCUI‬ port
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...

Device Model: ‪VNS-L11‬
Firmware: ‪NRD90M test-keys‬
Boot: ‪Dallas-Trunk_BOOT‬
Fastboot: ‪Chipset-dallas 5.0.0.1(07AU)_FASTBOOT‬
System: ‪System 5.0.0.57(0GC5)‬
Recovery: ‪(unknow)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪864002030384755‬
IMEI B: ‪864002030384755‬
Bluetooth MAC: ‪A4:CA:A0:1C:6D:16‬
WiFi MAC: ‪A4:CA:A0:1C:6C:1A‬
S/N: ‪4TE7N16C06010579‬
Board S/N: ‪7N3RUP16C5061893‬
Vendor Code: ‪hw‬
Country Code: ‪eu‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-06-30 16:23:30 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪VNS-L31‬
Reading basic data...
Reading secure data...
Writing public keys...
Identifying security...
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.

AbDuLlAH kHaWaR · 07-01-2021, 12:26

HuAWEI PSMART 2019 POT-LX1 UNLOCK DONE WITH TP FREE

Quote:

Welcome to Octoplus Huawei Software v.‪1.2.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
2021-07-01 11:20:37 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Found a fastboot device: 6BY7N19409000891
Error: Serial port ‪Android Sooner Single ADB Interface‬ is not available at the moment!

Connect failed.
Performed by ‪1.2.5‬ Software version.
2021-07-01 11:21:37 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Canceling... Please be patient!

Connect canceled.
Performed by ‪1.2.5‬ Software version.
2021-07-01 11:22:40 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19409000891
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.296(C555E11R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5‬ Software version.
2021-07-01 11:23:43 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username:
Warning: Invalid username

Direct Unlock failed.
Performed by ‪1.2.5‬ Software version.
Your balance: 30 credit(s)
2021-07-01 11:24:21 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.296(C555E11R1P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5‬ Software version.

AbDuLlAH kHaWaR · 07-03-2021, 13:05

HUAWEi P8 LITE MAR-LX1 UNLOCK DONE WITH MANUFACTURE MODE

Quote:

Job ID: 000000000129FAB6
2021-06-22 16:08:22 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?PRA-LX1?
Detected ?Android Adapter PCUI? port
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...

Device Model: ?PRA-L11?
Firmware: ?System 8.0.0.046(1L6X)_Preas-OVS 8.0.0(O)?
Boot: ?System 8.0.0.046(1L6X)_BOOT?
Fastboot: ?Chipset-dallas8.0.1.001(0G0L)_FASTBOOT?
System: ?System 8.0.0.046(1L6X)?
Recovery: ?(unknow)?
MEID: ?00000000000000?
PESN: ?00000000?
IMEI A: ?865006033864274?
IMEI B: ?000000000000000?
Bluetooth MAC: ?0C:8F:FF:CB:25:CC?
WiFi MAC: ?0C:8F:FF:CB:21:E3?
S/N: ?57U7N17809004618?
Board S/N: ?7N4REW1787067616?
Vendor Code: ?ee?
Country Code: ?gb?

Connect done.
Performed by ?1.2.5.3? Software version.
2021-06-22 16:08:40 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ?PRA-LX1?
Reading basic data...
Warning: Can't read Vendor/Country code.
Reading secure data...
Writing public keys...
Identifying security...
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot

Direct Unlock done.
Performed by ?1.2.5.3? Software version.

AbDuLlAH kHaWaR · 07-06-2021, 13:15

HuAWEI PSMART 2019 POT-LX1 UNLOCK DONE WITHOUT TP FREE

Quote:

Selected phone model: POT-LX1
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from the server...
Searching device in Upgrade mode...
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Writing ‪PACKAGE_TYPE‬ partition...
Writing ‪XLOADER‬ partition...

Firmware writing successfully completed

ON/OFF Factory Mode done.
Performed by ‪1.2.3.1‬ Software version.
Your balance: 30 credit(s)

Job ID: 000000000139DECE
2021-07-06 11:58:36 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪POT-LX1‬
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19613000175

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.3.1‬ Software version.

Job ID: 000000000139DF3F
2021-07-06 11:59:55 GMT -------------------------------------------------
Starting Direct Unlock
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
To perform this operation you need to have: 0 credits.
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
MEID: ‪00000000000000‬
IMEI A: ‪868188044184145‬
IMEI B: ‪000000000000000‬
S/N: ‪6BY7N19613000175‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
MEID: ‪00000000000000‬
IMEI A: ‪868188044184145‬
IMEI B: ‪000000000000000‬
S/N: ‪6BY7N19613000175‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.3.1‬ Software version.

Job ID: 000000000139DFF6
2021-07-06 12:02:29 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: POT-LX1
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 6BY7N19613000175

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.243(C555E9R1P3)‬
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ‪1.2.3.1‬ Software version.

AbDuLlAH kHaWaR · 07-06-2021, 15:51

https://www.youtube.com/watch?v=uJmX...FO%2CTRAVELFIT
(GSM INFO) HUAWEI P40 LITE (JNY-L21) HUAWEI ID REMOVE OCTOPLUS (FIT)

Quote:

Welcome to Octoplus Huawei Software v.?1.2.5.3?

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM10 DBAdapter Reserved Interface
2: COM11 Android Adapter PCUI
3: COM9 HUAWEI Mobile Connect - Fake Acm Interface

Job ID: 00000000011CDDD6
2021-06-10 14:28:38 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?JNY-LX1?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!

ON/OFF Factory Mode failed.
Performed by ?1.2.5.3? Software version.

Job ID: 00000000011CDE10
2021-06-10 14:29:15 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?JNY-LX1?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Initializing remote service connection...
Downloading additional resources...
Checking firmware package type
Searching device in Upgrade mode...
Detected ?DBAdapter Reserved Interface? port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ?SHA256RSA? partition...
Writing ?CRC? partition...
Writing ?BASE_VERLIST? partition...
Writing ?BASE_VER? partition...
Writing ?PACKAGE_TYPE? partition...
Writing ?HISIUFS_GPT? partition...

ON/OFF Factory Mode done.
Performed by ?1.2.5.3? Software version.

Job ID: 00000000011CDE62
2021-06-10 14:30:16 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?JNY-LX1?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN810_V1...
Initializing remote service connection...
Downloading additional resources...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7TSX207Y049015
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?JNY-LX1?
System: ?JNY-L21 10.1.0.226(C432E1R6P1)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?

Connect done.
Performed by ?1.2.5.3? Software version.
2021-06-10 14:31:44 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ?JNY-LX1?
Username:
Warning: Invalid username

Reset Huawei ID failed.
Performed by ?1.2.5.3? Software version.
Your balance: 30 credit(s)
2021-06-10 14:32:08 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ?JNY-LX1?
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?

Device Model: ?JNY-LX1?
System: ?JNY-L21 10.1.0.226(C432E1R6P1)?
MEID: ?A00000B99BDAE9?
IMEI A: ?861822058040374?
IMEI B: ?861822058050381?
Resetting Huawei ID...
Formatting secure data...
Rebooting device...

Reset Huawei ID done.
Performed by ?1.2.5.3? Software version.

Job ID: 00000000011CDF72
2021-06-10 14:33:24 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?JNY-LX1?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN810_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7TSX207Y049015
Detected ?Android Sooner Single ADB Interface? port

Device Model: ?JNY-LX1?
System: ?JNY-L21 10.1.0.226(C432E1R6P1)?
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?
Writing secure data...
Rebooting device...

ON/OFF Factory Mode done.
Performed by ?1.2.5.3? Software version.

AbDuLlAH kHaWaR · 07-08-2021, 17:48

Huawei P30 PRO VOG-L09 SIMLOCK NETWORK UNLOCKD WITH TP FREE

Quote:

Welcome to Octoplus Huawei Software v.‪1.2.5.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 Standard Serial over Bluetooth link
2: COM4 Standard Serial over Bluetooth link

Job ID: 00000000013CE32B
2021-07-08 16:41:03 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪VOG-L29‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Downloading additional resources...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Error: Wrong username or password!
Your balance: 30 credit(s)
Writing ‪FASTBOOT‬ partition...
Your balance: 30 credit(s)
Your balance: 30 credit(s)
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 7N6AYU1956123015
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-07-08 16:42:26 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪VOG-L29‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.

AbDuLlAH kHaWaR · 07-09-2021, 15:12

HuAWEI P30 LITE MAR-LX1A UNLOCK DONE WITH TP FREE...............

Quote:

Welcome to Octoplus Huawei Software v.‪1.2.5.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 Standard Serial over Bluetooth link
2: COM4 Standard Serial over Bluetooth link

Job ID: 00000000013DD109
2021-07-09 13:57:24 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪MAR-LX1A‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Initializing remote service connection...
Downloading patch files from the server...
Downloading additional resources...
Writing ‪SHA256RSA‬ partition...
Writing ‪CRC‬ partition...
Writing ‪BASE_VERLIST‬ partition...
Error: Failed write ‪BASE_VERLIST‬ partition
Canceling... Please be patient!
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.5.3‬ Software version.

Job ID: 00000000013DD45F
2021-07-09 14:08:48 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪MAR-LX1A‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading additional resources...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: JRQ0219A25002371
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.435(IRLC555E9R1P3)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-07-09 14:10:21 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ‪MAR-LX1A‬
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.435(IRLC555E9R1P3)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...

Direct Unlock done.
Performed by ‪1.2.5.3‬ Software version.

AbDuLlAH kHaWaR · 07-10-2021, 17:06

HuAWEI P30 LITE MAR-LX1A FRP REMOVED WITH TP FREE

Quote:

ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM6 Standard Modem over Bluetooth link

Job ID: 00000000013F2CFE
2021-07-10 15:57:48 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪MAR-LX1A‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: JRQ0219A13000794
Detected ‪Android Sooner Single ADB Interface‬ port
Your balance: 30 credit(s)

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.448(C431E13R2P7)‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬

Connect done.
Performed by ‪1.2.5.3‬ Software version.
2021-07-10 15:59:20 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪MAR-LX1A‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found

Reset FRP (Factory Mode) failed.
Performed by ‪1.2.5.3‬ Software version.

Job ID: 00000000013F2EDC
2021-07-10 16:03:26 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪MAR-LX1A‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: JRQ0219A13000794

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.448(C431E13R2P7)‬
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 10.0.0.448(C431E13R2P7)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.5.3‬ Software version.

AbDuLlAH kHaWaR · 07-12-2021, 16:15

HuAWEI PSMART 2020 POT-LX1A FRP GMAIL REMOVE WITH TP FREE

Quote:

Starting Reset FRP (Factory Mode)
Selected phone model: ‪POT-LX1‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 2HP4C20521010351

Device Model: ‪POT-LX1A‬
System: ‪POT-LX1A 9.1.0.380(C431E4R2P1)‬
MEID: ‪00000000000000‬
IMEI A: ‪866870045147393‬
IMEI B: ‪866870045197406‬
S/N: ‪2HP4C20521010351‬
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1A‬
System: ‪POT-LX1A 9.1.0.380(C431E4R2P1)‬
MEID: ‪00000000000000‬
IMEI A: ‪866870045147393‬
IMEI B: ‪866870045197406‬
S/N: ‪2HP4C20521010351‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.5.3‬ Software version.

AbDuLlAH kHaWaR · 07-13-2021, 11:11

HuAWEI P8 LITE (2017) FRP GMAIL REMOVE IN FASTBOOT MODE FREE

Quote:

Job ID: 000000000141F1E7
2021-07-13 09:58:20 GMT -------------------------------------------------
Starting Reset FRP (Fastboot Mode)
Searching Fastboot devices...
Found android device: 9DC4C17216000835

Device Model: ‪PRA-LX1‬
IMEI A: ‪862550034285743‬
IMEI B: ‪862550034317256‬
S/N: ‪9DC4C17216000835‬
Connecting to server...
Writing Reset FRP data...

Reset FRP (Fastboot Mode) done.
Performed by ‪1.2.5.3‬ Software version.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode