Post here success stories with Octoplus Huawei Tool - GSM-Forum

Octopus box · 05-22-2018, 15:56

Post here success stories with Octoplus Huawei Tool.

WAJID PNR · 05-23-2018, 10:15

Huawei Mate 10 remove 'Demo' Done !

with Octopus Huawei Tool

before any operation info

Code:

-------------------------------------------------------------------------
Starting Read Info
Reading basic data...
Reading secure data...

Device Model: ALP-L29
Firmware: System 8.0.0.38(03Y0)
Boot: System 8.0.0.38(03Y0)_BOOT
Fastboot: Chipset-boston8.0.0.38(01DN)_FASTBOOT
System: System 8.0.0.38(03Y0)
Recovery: (unknow)
IMEI A: 866xxxxxxxxxxxxx
IMEI B: 866xxxxxxxxxxxxx
Bt MAC address: 78:62:56:48:D6:D7
WiFi MAC address: 78:62:56:48:D5:34
SN: Qxxxxxxxxxxxxxxxxxx
Board SN: 7Nxxxxxxxxxxxxxx
Vendor/Country code: other/demo
 
Read Info done.
Performed by 1.0.0 Software version.

-------------------------------------------------------------------------

Repair Tab Logs

Code:

Starting Repair Info
Reading basic data...
Reading secure data...
Identifying security...
Repairing Vendor/Country code...
Resetting your device
 
Repair Info done.
Performed by 1.0.0 Software version.

after Repair "Vendor / Country Logs

Code:

Device Model: ALP-L29
Firmware: System 8.0.0.38(03Y0)
Boot: System 8.0.0.38(03Y0)_BOOT
Fastboot: Chipset-boston8.0.0.38(01DN)_FASTBOOT
System: System 8.0.0.38(03Y0)
Recovery: (unknow)
IMEI A: 866xxxxxxxxxxxxx
IMEI B: 866xxxxxxxxxxxxx
Bt MAC address: 78:62:56:48:D6:D7
WiFi MAC address: 78:62:56:48:D5:34
SN: Qxxxxxxxxxxxxxxxxx
Board SN: 7Nxxxxxxxxxxxxxxxxxx
Vendor/Country code: hw/meafnaf
 
Auto detect done.
Performed by 1.0.0 Software version.

note : after repair vendor code and country you have to update fimware which is belong to that vendor/country

WAJID PNR · 05-23-2018, 10:40

Mate 10 lite (RNE-L21 ) FRP unlock Done !
with Octopus Huawei Tool

Code:

Starting Reset FRP
 
Put the phone in 'Fastboot' mode
  1. Power off the phone. Remove SD and SIM cards
  2. Press 'Vol-' and insert USB cable
  3. Wait until phone enters 'Fastboot' mode
Total interfaces: 1


Device Model: RNE-L21
IMEI A: 866xxxxxxxxxxxxx
IMEI B: 866xxxxxxxxxxxxx
SN: FFxxxxxxxxxxxxxxxxxx
Initializing Reset FRP process
Connecting to Server
Writing Reset FRP data

Reset FRP done.
Performed by 1.0.0 Software version

WAJID PNR · 05-23-2018, 11:31

Honor 7c (LND-L29) FRP remove Done !!
with Octopus Huawei Tool

Code:

Starting Reset FRP
 
Put the phone in 'Fastboot' mode
  1. Power off the phone. Remove SD and SIM cards
  2. Press 'Vol-' and insert USB cable
  3. Wait until phone enters 'Fastboot' mode
Selected device Qualcomm Android Device
Total interfaces: 1

Device Model: LND-L29
IMEI A: 86xxxxxxxxxxxxxx
SN: 9xxxxxxxxxxxxxx
Initializing Reset FRP process
Connecting to server
Writing Reset FRP data
 
Reset FRP done.
Performed by 1.0.0 Software version.

WAJID PNR · 05-23-2018, 18:13

Honor 8 Lite (PRA-L21HN) Bootloader Code Done

with Octopus Huawei Tool

Code:

Starting Auto detect
Detected HiSilicon Android Device at COM216
Removing security protection...
Connecting to server
Authorization successful
Reading basic data...
Reading secure data...

Device Model: PRA-L21HN
Firmware: NRD90M test-keys
Boot: Dallas-Release_B200_BOOT
Fastboot: Chipset-dallas 5.0.0.1(0DZ2)_FASTBOOT
System: System 5.0.0.57(197E)
Recovery: (unknow)
IMEI A: 86xxxxxxxxxxxxx
IMEI B: 86xxxxxxxxxxxxx
Bt MAC address: F0:0F:EC:12:F5:4A
WiFi MAC address: F0:0F:EC:12:ED:79
SN: HGxxxxxxxxxxxxxxx
Board SN: DUxxxxxxxxxxxxxxx
Vendor/Country code: hw/meafnaf
 
Auto detect done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Read Bootloader Code
Reading basic data...
Reading secure data...
Bootloader code: 8700090063738871
 
Read Bootloader Code done.
Performed by 1.0.0 Software version.

308981113 · 05-24-2018, 08:20

Starting Auto detect
Detected Qualcomm Android Device at COM17
Removing security protection...
Connecting to server
Authorization successful

Device Model: TRT-AL00
Firmware: HL1TRTM-AL00
Boot: Chipset-msm8940 5.1.0.1(0LED)_SBL1
System: System 5.1.0.78(0PJ1)
IMEI A: 867271032345760
IMEI B: 867271032479122
Bt MAC address: 54:B1:21:61:4E:8F
WiFi MAC address: 54:B1:21:61:5E:33
SN: 9YJNW17921003097
Board SN: NW4KXK179N053031
Vendor/Country code: all/cn

Auto detect done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Reset Huawei ID
Resetting your device

Reset Huawei ID done.
Performed by 1.0.0.1 Software version.

308981113 · 05-25-2018, 06:09

-------------------
Starting Auto detect
Warning: Set modem mode fail
Detected Qualcomm Android Device at COM7
Removing security protection...
Connecting to server
Authorization successful

Device Model: SLA-AL00
Firmware: SH1SLA-AL00
Boot: Chipset-msm8917_b200_release 5.1.0.1(00HP)_SBL1
System: System 5.1.0.78(0987)
IMEI A: 864100033676399
IMEI B: 864100033704696
Bt MAC address: 10:B1:F8:70:13

5
WiFi MAC address: 10:B1:F8:60

1:95
SN: 3UQBB17801506814
Board SN: 3UQBBDE772803311
Vendor/Country code: all/cn

Auto detect done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Reset Huawei ID
Resetting your device

Reset Huawei ID done.
Performed by 1.0.0.1 Software version.

308981113 · 05-25-2018, 06:10

Starting Auto detect
Detected HiSilicon Android Device at COM13
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Removing security protection...
Connecting to server
Authorization successful
Reading basic data...
Reading secure data...

Device Model: WAS-AL00
Firmware: System 5.1.0.78(0PIV)
Boot: Dallas-Trunk_BOOT
Fastboot: Chipset-dallas 5.1.0.1(0K79)_FASTBOOT
System: System 5.1.0.78(0PIV)
Recovery: (unknow)
IMEI A: 863095030997874
IMEI B: 863095031017888
Bt MAC address: 88:44:77

0:94:B9
WiFi MAC address: 88:44:77

0:AF:BE
SN: 4YY4C17228000183
Board SN: 4C4AGS172V078741
Vendor/Country code: all/cn

Auto detect done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Reset Huawei ID
Resetting your device

Reset Huawei ID done.
Performed by 1.0.0.1 Software version.

WAJID PNR · 05-28-2018, 19:27

Honor 5Cpro (DLI-L42) FRP Done with Octopus Huawei Tool

Code:

Starting Reset FRP
 
Put the phone in 'Fastboot' mode
  1. Power off the phone. Remove SD and SIM cards
  2. Press 'Vol-' and insert USB cable
  3. Wait until phone enters 'Fastboot' mode
Total interfaces: 1

Device Model: DLI-L42
IMEI A: 86-----------------
Bt MAC address: 78:62:56:44:7E:22
WiFi MAC address: 78:62:56:44:7E:23
SN: 7P--------------------
Board SN: 5H-------------------
Initializing Reset FRP process
Connecting to server
Writing Reset FRP data
 
Reset FRP done.
Performed by 1.0.0.1 Software version.

Maurioski · 05-29-2018, 06:33

add test model for CHC-U03

Code:

2018-05-28 17:49:10.341    Starting Auto detect
2018-05-28 17:49:10.342    Refreshing serial ports list
2018-05-28 17:49:14.397    Found COM ports:
2018-05-28 17:49:14.399    1:    COM13    HUAWEI Mobile Connect - Fake Acm Interface
2018-05-28 17:49:14.400    2:    COM14    HUAWEI Mobile Connect - Fake Acm Interface
2018-05-28 17:49:14.403    3:    COM15    DBAdapter Reserved Interface
2018-05-28 17:49:14.404    4:    COM16    Android Adapter PCUI
2018-05-28 17:49:14.411    Running detect for Qualcomm
2018-05-28 17:49:14.517    Not Qualcomm based device
2018-05-28 17:49:14.528    Running detect for HiSilicon
2018-05-28 17:49:14.652    Detect HiSilicon platform ok
2018-05-28 17:49:14.654    Detected HiSilicon Android Device at COM16
2018-05-28 17:49:14.655    Read pre auth info for HiSilicon
2018-05-28 17:49:14.757    Warning: Can't get device model.
2018-05-28 17:49:14.918    Removing security protection...
2018-05-28 17:49:15.040    Connecting to server
2018-05-28 17:49:17.598    Authorization successful
2018-05-28 17:49:17.602    Reading basic data...
2018-05-28 17:49:17.994    Warning: Can't get device model.
2018-05-28 17:49:18.101    Reading secure data...
2018-05-28 17:49:21.511    Device Model: Huawei HiSilicon Device
2018-05-28 17:49:21.517    Firmware: CHC-U03 V100R001C25B130CUSTC25D001
2018-05-28 17:49:21.522    Boot: DailyBuild_201510211535_BOOT
2018-05-28 17:49:21.525    Fastboot: DailyBuild_201510211535_FASTBOOT
2018-05-28 17:49:21.529    System: CHC-U03 V100R001C25B130_SYSTEM
2018-05-28 17:49:21.533    Recovery: (unknow)
2018-05-28 17:49:21.537    IMEI A: ------022800982
2018-05-28 17:49:21.542    Bt MAC address: AC:CF:85:59:B2:06
2018-05-28 17:49:21.545    WiFi MAC address: AC:CF:85:59:A2:65
2018-05-28 17:49:21.549    SN: A5B4C15A13002839
2018-05-28 17:49:21.553    Board SN: 4C3GSQ15A6051362
2018-05-28 17:49:21.557    Vendor/Country code: claro/la
2018-05-28 17:49:21.560    
2018-05-28 17:49:21.562    Auto detect done.
2018-05-28 17:49:21.566    Performed by 1.0.0.1 Software version.

308981113 · 05-29-2018, 07:34

Welcome to Octoplus/Octopus Huawei Software v.1.0.0.1

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

-------------------------------------------------------------------------
Starting Reset FRP

Put the phone in 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
Total interfaces: 1

Device Model: CAZ-AL10
IMEI A: 863793030345827
SN: XPUDU16B09003028
Initializing Reset FRP process
Connecting to server
Writing Reset FRP data

Reset FRP done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Auto detect
Warning: Set modem mode fail
Detected Qualcomm Android Device at COM7
Removing security protection...
Connecting to server
Authorization successful

Device Model: CAN-AL00
Firmware: HL1CANAL10M
Boot: Chipset-msm8953 5.0.0.33(03BA)_SBL1
System: System 5.0.0.57(12P4)
Recovery: CAZC00B380_RECOVERY
IMEI A: 863793030345827
IMEI B: 863531038653044
Bt MAC address: 7C:11:CB:BE:C6:7C
WiFi MAC address: 7C:11:CB:BE:B9:FB
SN: XPUDU16B09003028
Board SN: DU3SDH16BE018824
Vendor/Country code: all/cn

Auto detect done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Reset Huawei ID
Resetting your device

Reset Huawei ID done.
Performed by 1.0.0.1 Software version.

mestoo1 · 05-29-2018, 12:53

MATE 8:

308981113 · 05-31-2018, 03:37

Welcome to Octoplus/Octopus Huawei Software v.1.0.0.1

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

-------------------------------------------------------------------------
Starting Auto detect
Detected HiSilicon Android Device at COM13
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Removing security protection...
Connecting to server
Authorization successful
Reading basic data...
Reading secure data...

Device Model: PRA-AL00
Firmware: NRD90M test-keys
Boot: Dallas-Release_B200_BOOT
Fastboot: Chipset-dallas 5.0.0.1(0E37)_FASTBOOT
System: System 5.0.0.57(1AQY)
Recovery: (unknow)
IMEI A: 867007032786508
IMEI B: 867007032927631
Bt MAC address: 54:B1:21:9E:E7:F2
WiFi MAC address: 54:B1:21:9E:F5:CB
SN: HMK7N17919011126
Board SN: 7N4RBM179M087553
Vendor/Country code: all/cn

Auto detect done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Reset Huawei ID
Resetting your device

Reset Huawei ID done.
Performed by 1.0.0.1 Software version.

Shensohau · 06-01-2018, 22:40

Huawei CM990 Movilnet VE MEID DONE On Seconds

P.D: Complain About it??? Fast, Easy, Powerful... More Surprises will Arrive

Best Regards
Shensohau

308981113 · 06-02-2018, 02:53

Starting Auto detect
Detected HiSilicon Android Device at COM13
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Removing security protection...
Connecting to server
Authorization successful
Reading basic data...
Reading secure data...

Device Model: WAS-AL00
Firmware: NRD90M test-keys
Boot: Dallas-Trunk_BOOT
Fastboot: Chipset-dallas 5.1.0.1(09YO)_FASTBOOT
System: System 5.1.0.63(0TCB)
Recovery: (unknow)
IMEI A: 865121039578024
IMEI B: 865121039714280
Bt MAC address: C8:94:BB:BA:F4:74
WiFi MAC address: C8:94:BB:BB:28:84
SN: 4YYDU17504007761
Board SN: DU4AGS1757065400
Vendor/Country code: all/cn

Auto detect done.
Performed by 1.0.0.1 Software version.

-------------------------------------------------------------------------
Starting Reset Huawei ID
Resetting your device

Reset Huawei ID done.
Performed by 1.0.0.1 Software version.

05-22-2018, 15:56	#1 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,809 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	Post here success stories with Octoplus Huawei Tool Post here success stories with Octoplus Huawei Tool. Last edited by Octopus box; 06-08-2018 at 04:47.

05-24-2018, 08:20	#6 (permalink)
308981113 No Life Poster Join Date: Mar 2010 Posts: 676 Member: 1274135 Status: Offline Thanks Meter: 157	TRT-AL00 Reser Huawei ID successfully done Starting Auto detect Detected Qualcomm Android Device at COM17 Removing security protection... Connecting to server Authorization successful Device Model: TRT-AL00 Firmware: HL1TRTM-AL00 Boot: Chipset-msm8940 5.1.0.1(0LED)_SBL1 System: System 5.1.0.78(0PJ1) IMEI A: 867271032345760 IMEI B: 867271032479122 Bt MAC address: 54:B1:21:61:4E:8F WiFi MAC address: 54:B1:21:61:5E:33 SN: 9YJNW17921003097 Board SN: NW4KXK179N053031 Vendor/Country code: all/cn Auto detect done. Performed by 1.0.0.1 Software version. ------------------------------------------------------------------------- Starting Reset Huawei ID Resetting your device Reset Huawei ID done. Performed by 1.0.0.1 Software version. Last edited by Octopus box; 05-24-2018 at 09:04.

05-25-2018, 06:09	#7 (permalink)
308981113 No Life Poster Join Date: Mar 2010 Posts: 676 Member: 1274135 Status: Offline Thanks Meter: 157	SLA-AL00 Huawei Account Reset successfully done ------------------- Starting Auto detect Warning: Set modem mode fail Detected Qualcomm Android Device at COM7 Removing security protection... Connecting to server Authorization successful Device Model: SLA-AL00 Firmware: SH1SLA-AL00 Boot: Chipset-msm8917_b200_release 5.1.0.1(00HP)_SBL1 System: System 5.1.0.78(0987) IMEI A: 864100033676399 IMEI B: 864100033704696 Bt MAC address: 10:B1:F8:70:135 WiFi MAC address: 10:B1:F8:601:95 SN: 3UQBB17801506814 Board SN: 3UQBBDE772803311 Vendor/Country code: all/cn Auto detect done. Performed by 1.0.0.1 Software version. ------------------------------------------------------------------------- Starting Reset Huawei ID Resetting your device Reset Huawei ID done. Performed by 1.0.0.1 Software version. Last edited by Octopus box; 05-25-2018 at 06:16.

05-25-2018, 06:10	#8 (permalink)
308981113 No Life Poster Join Date: Mar 2010 Posts: 676 Member: 1274135 Status: Offline Thanks Meter: 157	WAS-AL00 account opened successfully Starting Auto detect Detected HiSilicon Android Device at COM13 Warning: Can't get device model. Warning: Can't get IMEI/MAC info. Removing security protection... Connecting to server Authorization successful Reading basic data... Reading secure data... Device Model: WAS-AL00 Firmware: System 5.1.0.78(0PIV) Boot: Dallas-Trunk_BOOT Fastboot: Chipset-dallas 5.1.0.1(0K79)_FASTBOOT System: System 5.1.0.78(0PIV) Recovery: (unknow) IMEI A: 863095030997874 IMEI B: 863095031017888 Bt MAC address: 88:44:770:94:B9 WiFi MAC address: 88:44:770:AF:BE SN: 4YY4C17228000183 Board SN: 4C4AGS172V078741 Vendor/Country code: all/cn Auto detect done. Performed by 1.0.0.1 Software version. ------------------------------------------------------------------------- Starting Reset Huawei ID Resetting your device Reset Huawei ID done. Performed by 1.0.0.1 Software version. Last edited by Octopus box; 05-25-2018 at 06:18.

05-29-2018, 07:34	#11 (permalink)
308981113 No Life Poster Join Date: Mar 2010 Posts: 676 Member: 1274135 Status: Offline Thanks Meter: 157	Huawei NOVA unlocks account lock to determine Welcome to Octoplus/Octopus Huawei Software v.1.0.0.1 To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: ##2846579## ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode ------------------------------------------------------------------------- Starting Reset FRP Put the phone in 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode Total interfaces: 1 Device Model: CAZ-AL10 IMEI A: 863793030345827 SN: XPUDU16B09003028 Initializing Reset FRP process Connecting to server Writing Reset FRP data Reset FRP done. Performed by 1.0.0.1 Software version. ------------------------------------------------------------------------- Starting Auto detect Warning: Set modem mode fail Detected Qualcomm Android Device at COM7 Removing security protection... Connecting to server Authorization successful Device Model: CAN-AL00 Firmware: HL1CANAL10M Boot: Chipset-msm8953 5.0.0.33(03BA)_SBL1 System: System 5.0.0.57(12P4) Recovery: CAZC00B380_RECOVERY IMEI A: 863793030345827 IMEI B: 863531038653044 Bt MAC address: 7C:11:CB:BE:C6:7C WiFi MAC address: 7C:11:CB:BE:B9:FB SN: XPUDU16B09003028 Board SN: DU3SDH16BE018824 Vendor/Country code: all/cn Auto detect done. Performed by 1.0.0.1 Software version. ------------------------------------------------------------------------- Starting Reset Huawei ID Resetting your device Reset Huawei ID done. Performed by 1.0.0.1 Software version. Last edited by Octopus box; 05-29-2018 at 13:27.

05-29-2018, 12:53	#12 (permalink)
mestoo1 Freak Poster Join Date: May 2013 Location: Turkey Posts: 498 Member: 1941192 Status: Offline Thanks Meter: 57	Huawei Mate 8 NXT-L29 Repair Successfully Done MATE 8: Last edited by Octopus box; 05-29-2018 at 13:25.

05-31-2018, 03:37	#13 (permalink)
308981113 No Life Poster Join Date: Mar 2010 Posts: 676 Member: 1274135 Status: Offline Thanks Meter: 157	Huawei Glory 8 Youth version of PRA-AL00 Reset Huawei ID successfully done Welcome to Octoplus/Octopus Huawei Software v.1.0.0.1 To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: ##2846579## ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode ------------------------------------------------------------------------- Starting Auto detect Detected HiSilicon Android Device at COM13 Warning: Can't get device model. Warning: Can't get IMEI/MAC info. Removing security protection... Connecting to server Authorization successful Reading basic data... Reading secure data... Device Model: PRA-AL00 Firmware: NRD90M test-keys Boot: Dallas-Release_B200_BOOT Fastboot: Chipset-dallas 5.0.0.1(0E37)_FASTBOOT System: System 5.0.0.57(1AQY) Recovery: (unknow) IMEI A: 867007032786508 IMEI B: 867007032927631 Bt MAC address: 54:B1:21:9E:E7:F2 WiFi MAC address: 54:B1:21:9E:F5:CB SN: HMK7N17919011126 Board SN: 7N4RBM179M087553 Vendor/Country code: all/cn Auto detect done. Performed by 1.0.0.1 Software version. ------------------------------------------------------------------------- Starting Reset Huawei ID Resetting your device Reset Huawei ID done. Performed by 1.0.0.1 Software version. Last edited by Octopus box; 05-31-2018 at 05:02.

06-01-2018, 22:40	#14 (permalink)
Shensohau No Life Poster Join Date: Aug 2010 Location: Inside Logic Age: 37 Posts: 5,882 Member: 1377783 Status: Offline Sonork: 100.1611724 Thanks Meter: 3,335	Huawei CM990 Movilnet VE MEID DONE On Seconds Huawei CM990 Movilnet VE MEID DONE On Seconds P.D: Complain About it??? Fast, Easy, Powerful... More Surprises will Arrive Best Regards Shensohau Last edited by Octopus box; 06-02-2018 at 08:17.

06-02-2018, 02:53	#15 (permalink)
308981113 No Life Poster Join Date: Mar 2010 Posts: 676 Member: 1274135 Status: Offline Thanks Meter: 157	Huawei WAS-AL00 reset ID completed Starting Auto detect Detected HiSilicon Android Device at COM13 Warning: Can't get device model. Warning: Can't get IMEI/MAC info. Removing security protection... Connecting to server Authorization successful Reading basic data... Reading secure data... Device Model: WAS-AL00 Firmware: NRD90M test-keys Boot: Dallas-Trunk_BOOT Fastboot: Chipset-dallas 5.1.0.1(09YO)_FASTBOOT System: System 5.1.0.63(0TCB) Recovery: (unknow) IMEI A: 865121039578024 IMEI B: 865121039714280 Bt MAC address: C8:94:BB:BA:F4:74 WiFi MAC address: C8:94:BB:BB:28:84 SN: 4YYDU17504007761 Board SN: DU4AGS1757065400 Vendor/Country code: all/cn Auto detect done. Performed by 1.0.0.1 Software version. ------------------------------------------------------------------------- Starting Reset Huawei ID Resetting your device Reset Huawei ID done. Performed by 1.0.0.1 Software version. Last edited by Octopus box; 06-02-2018 at 08:13.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode