|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
07-10-2019, 12:01 | #151 (permalink) |
Junior Member Join Date: Jan 2014
Posts: 11
Member: 2118695 Status: Offline Thanks Meter: 1 | Welcome to Octoplus Huawei Software v.1.1.0 To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: *#*#2846579#*#* ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: *#*#14789632#*#* ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' 2019-07-09 13:56:17 GMT ------------------------------------------------- Starting Auto detect Warning: Set modem mode fail Detected Qualcomm Android Device at COM97 Removing security protection... Connecting to server... Authorization is successful Device Model: ATU-L21 Boot: Chipset-msm8917 8.0.0.33(02FH)_SBL1 System: System 8.0.0.073(00QU) MEID: 00000000000000 PESN: 00000000 IMEI A: *************** IMEI B: *************** Bluetooth MAC: B4:86:55:13:08:00 WiFi MAC: B4:86:55:13:07:FF S/N: DKJ9X18A18G01015 Board S/N: 78606P4541013015 Vendor Code: hw Country Code: cea Auto detect done. Performed by 1.1.0 Software version. 2019-07-09 13:56:49 GMT ------------------------------------------------- Starting Repair Info New IMEI A: *************** New IMEI B: *************** Repairing IMEI A... Repairing IMEI B... Resetting your device Repair Info done. Performed by 1.1.0 Software version. |
07-27-2019, 11:41 | #152 (permalink) |
Freak Poster Join Date: May 2015 Location: Pakistan
Posts: 334
Member: 2401943 Status: Offline Thanks Meter: 182 | 2019-07-27 10:39:17 GMT ------------------------------------------------- Starting Reset FRP (Fastboot Mode) Searching connected Fastboot devices... Device Model: ATU-L31 System: ATU-L31 8.0.0.141(C185) IMEI A: 86XXXXXXXXXXXX S/N: DKJ9X18508G07337 Initializing Reset FRP process... Connecting to server... Writing Reset FRP data... Reset FRP (Fastboot Mode) done. Performed by 1.1.0 Software version. |
08-06-2019, 10:44 | #153 (permalink) |
No Life Poster Join Date: Mar 2016 Location: Ukraine
Posts: 1,024
Member: 2550141 Status: Offline Thanks Meter: 1,115 | Huawei Y6 2018 ATU-L21 Reset FRP Code: Starting Read Info (Fastboot Mode) Searching connected Fastboot devices... Device Model: ATU-L21 IMEI A: 866248048250680 S/N: GSM9X18B06G04399 Build Number: ATU-L21 8.0.0.147(C432) Region Code: C432 Region: Europe Read Info (Fastboot Mode) done. Performed by 1.1.0 Software version. 2019-08-06 09:42:13 GMT ------------------------------------------------- Starting Reset FRP (Fastboot Mode) Searching connected Fastboot devices... Device Model: ATU-L21 System: ATU-L21 8.0.0.147(C432) IMEI A: 866248048250680 S/N: GSM9X18B06G04399 Initializing Reset FRP process... Connecting to server... Writing Reset FRP data... Reset FRP (Fastboot Mode) done. Performed by 1.1.0 Software version. |
08-12-2019, 09:56 | #154 (permalink) |
Junior Member Join Date: Sep 2012 Location: Minsk
Posts: 17
Member: 1807607 Status: Offline Thanks Meter: 2 | fig-lx1 frp com 1.0 ------------------------------------------------- Starting Update OEMINFO Phone connect successfully Updating bootloader KIRIN659_A8.0_V1.. Writing XLOADER partition.. XLOADER partition has been written successfully Writing FASTBOOT partition.. FASTBOOT partition has been written successfully Bootloader Update successfully Rebooting to fastboot mode.. Searching Fastboot devices... Device Model: FIG-LX1 System: FIG-LX1 9.1.0.115(C10E5R1P4) MEID: 00000000000000 IMEI A: 862160046583513 IMEI B: 862160046597521 S/N: XEDNW18814000272 Writing FRP partition.. Update OEMINFO done. Performed by 1.1.0.17 Software version. System: FIG-LX1 9.1.0.115(C10E5R1P4) |
08-14-2019, 11:33 | #155 (permalink) |
No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | Ath-ul01 frp done 2019-08-14 10:32:01 GMT ------------------------------------------------- Starting Reset FRP (Fastboot Mode) Searching connected Fastboot devices... System: ATH-UL01C10B140 S/N: EGQ7N1XXXXXXXXXXXXXXX Initializing Reset FRP process... Connecting to server... Writing Reset FRP data... Reset FRP (Fastboot Mode) done. Performed by 1.0.9 Software version. |
08-26-2019, 06:56 | #156 (permalink) |
No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | Huawei VNS-L31 Resetr FRp DONE 2019-08-26 05:26:52.642 To enable 'Upgrade' mode 2019-08-26 05:26:52.642 1. Power off the phone. Remove SD and SIM cards 2019-08-26 05:26:52.643 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 2019-08-26 05:26:52.643 3. Wait until phone enters 'Upgrade mode' 2019-08-26 05:26:52.801 Init finished 2019-08-26 05:28:13.492 2019-08-26 05:28:13 GMT ------------------------------------------------- 2019-08-26 05:28:13.494 Starting Reset FRP (Fastboot Mode) 2019-08-26 05:28:13.510 Searching connected Fastboot devices... 2019-08-26 05:28:14.530 Total interfaces: 1 2019-08-26 05:28:14.530 Interface 0 : flags: 1, name(79): \\?\usb#vid_18d1&pid_d00d#6&38f528ad&1&2#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b} 2019-08-26 05:28:15.931 System: VNS-L31C02B346 2019-08-26 05:28:15.933 IMEI A: 8640020xxxxxxxxxxx 2019-08-26 05:28:15.939 S/N: 4TE7xxxxxxxxxxxxxxxx 2019-08-26 05:28:15.942 Initializing Reset FRP process... 2019-08-26 05:28:16.331 Connecting to server... 2019-08-26 05:28:18.847 FRP unlock 0 2019-08-26 05:28:19.123 Writing erase FRP data 2019-08-26 05:28:19.956 Writing Reset FRP data... 2019-08-26 05:28:20.156 2019-08-26 05:28:20.158 Reset FRP (Fastboot Mode) done. 2019-08-26 05:28:20.160 Performed by 1.0.9 Software version. |
10-22-2019, 13:57 | #157 (permalink) |
No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | ATU-L31 Reset FRP DONE Starting Reset FRP (Fastboot Mode) Searching Fastboot devices... Device Model: ATU-L31 System: ATU-L31 8.0.0.155(C10) IMEI A: 86xxxxxxxxxxxxxxxxx S/N: DKxxxxxxxxxxxxxxxxx Connecting to server... Writing Reset FRP data... Reset FRP (Fastboot Mode) done. |
11-03-2019, 14:55 | #159 (permalink) |
Insane Poster Join Date: Oct 2012 Location: Gsm World
Posts: 77
Member: 1819074 Status: Offline Thanks Meter: 30 | huawei MRD-LX1F frp reset done succefully Welcome to Octoplus Huawei Software v.1.1.1.13 To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: *#*#2846579#*#* ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: *#*#14789632#*#* ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' Found COM ports: 1: COM11 USB Serial Port 2019-11-03 05:36:18 GMT ------------------------------------------------- Starting Reset FRP (MTK Test Point) Please Power off the phone, attach Test Point and insert USB cable Detecting Chip Version... HW Chip : MT6761 HW Version : 8A00.CA01.0200.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 16 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 29820 Mb Reading Partition Table Reading FRP Partition Removing FRP secure data... Reset FRP (MTK Test Point) done. Performed by 1.1.1.13 Software version. |
11-13-2019, 13:16 | #160 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | ANE-LX1 8.0.0.150(C432) Reset FRP successfully done using Test Point: Code: 2019-11-13 08:08:54 GMT ------------------------------------------------- Starting Reset FRP (Test Point) Selected phone model: ANE-LX1 Phone connect successfully Updating bootloader KIRIN659_A8.0_V1.. Initializing remote service connection Writing XLOADER partition.. XLOADER partition has been written successfully Writing FASTBOOT partition.. FASTBOOT partition has been written successfully Bootloader Update successfully Rebooting to fastboot mode.. Searching Fastboot devices... Device Model: ANE-LX1 System: ANE-LX1 8.0.0.150(C432) MEID: 00000000000000 IMEI A: 866237045564xxx IMEI B: 866237045589xxx S/N: 9WV4C18C21012xxx Writing FRP partition.. Reset FRP (Test Point) done. Performed by 1.1.1.20 Software version. Last edited by Dr_Wolodya; 11-13-2019 at 13:25. |
11-18-2019, 06:20 | #161 (permalink) |
No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | Dua l22 FRP Done Detecting Chip Version... HW Chip : MT6739 HW Version : 8A00.CB00.0002.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Removing security protection... Connecting to server... Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 4 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 14910 Mb Reading Partition Table Reading FRP Partition Writing FRP Partition data Reset FRP (MTK Loader) done. Performed by 1.1.1.13 Software version. |
11-18-2019, 14:15 | #162 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | ANE-LX1 (8.0.0.046) Read Bootloader Code successfully done: Code: Starting Connect Selected phone model: ANE-LX1 Warning: Can't get device model. Warning: Can't get IMEI/MAC info. Connecting to server... Authorization is successful Reading basic data... Reading secure data... Device Model: ANE-L21 Firmware: System 8.0.0.046(09B8) Boot: System 8.0.0.046(09B8)_BOOT Fastboot: Chipset-dallas8.0.0.001(02BC)_FASTBOOT System: System 8.0.0.046(09B8) Recovery: (unknow) MEID: 00000000000000 PESN: 00000000 IMEI A: 866237045564xxxx IMEI B: 866237045589xxxx Bluetooth MAC: D0:16:B4:9F:D7:A5 WiFi MAC: D0:16:B4:9F:CD:E0 S/N: 9WV4C18C21012xxx Board S/N: 4C4VYH18CM023786 Vendor Code: hw Country Code: eu Connect done. Performed by 1.1.1.20 Software version. 2019-11-18 09:11:42 GMT ------------------------------------------------- Starting Read Bootloader Code Reading basic data... Reading secure data... Bootloader code: 8984443585625772 Read Bootloader Code done. Performed by 1.1.1.20 Software version. |
11-23-2019, 09:59 | #164 (permalink) |
No Life Poster Join Date: Apr 2008 Location: South Africa
Posts: 708
Member: 746586 Status: Offline Thanks Meter: 205 | Welcome to Octoplus Huawei Software v.1.1.2 To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: *#*#2846579#*#* ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: *#*#14789632#*#* ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' 2019-11-23 08:50:36 GMT ------------------------------------------------- Starting Connect Selected phone model: DRA-LX5 Please Power off the phone, Press 'Vol-' and insert USB cable Detecting Chip Version... HW Chip : MT6739 HW Version : 8A00.CB00.0002.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Removing security protection... Connecting to server... Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 4 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 14910 Mb IMEI A: xxxxxxxxxxxxxxxxxxx IMEI B: fffffffffffffff Connect done. Performed by 1.1.2 Software version. 2019-11-23 08:51:13 GMT ------------------------------------------------- Starting Repair Info New IMEI A: xxxxxxxxxxxxxxx Creating partition backup: DRA-LX5_nvdata_2019-11-23_10-51-15.bin Create partition backup done Creating partition backup: DRA-LX5_proinfo_2019-11-23_10-51-18.bin Create partition backup done Repair Info done. Performed by 1.1.2 Software version. |
11-25-2019, 18:03 | #165 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | WAS-AL00 (8.0.0.046) Read Bootloader Code successfully done: Code: 2019-11-25 12:59:23 GMT ------------------------------------------------- Starting Connect Selected phone model: WAS-AL00 Warning: Can't get serial number. Warning: Can't get device model. Warning: Can't get IMEI/MAC info. Connecting to server... Authorization is successful Reading basic data... Reading secure data... Device Model: WAS-AL00 Firmware: System 8.0.0.046(0T8H) Boot: System 8.0.0.046(0T8H)_BOOT Fastboot: Chipset-dallas8.0.1.001(025R)_FASTBOOT System: System 8.0.0.046(0T8H) Recovery: (unknow) MEID: A0000077D15ADA PESN: 80CF80BA IMEI A: 863271038170216 IMEI B: 863271038193044 Bluetooth MAC: 50:04:B8:E7:44:D4 WiFi MAC: 50:04:B8:E7:52:84 S/N: NPE4C17621000371 Board S/N: 4C4AGU176M019211 Vendor Code: all Country Code: cn Connect done. Performed by 1.1.2 Software version. 2019-11-25 12:59:36 GMT ------------------------------------------------- Starting Read Bootloader Code Reading basic data... Reading secure data... Bootloader code: 3807040007448697 Read Bootloader Code done. Performed by 1.1.2 Software version. |
The Following User Says Thank You to Dr_Wolodya For This Useful Post: |
Bookmarks |
| |
|