GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus Huawei Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 09-01-2022, 07:27   #361 (permalink)
No Life Poster
 
Join Date: Jan 2012
Location: YOUR HEART
Posts: 2,513
Member: 1712884
Status: Offline
Thanks Meter: 853
Cool Art-l29 huawei id remove done


Code:
2022-08-31 17:11:19.252    Loading application settings
2022-08-31 17:11:19.281    Refreshing serial ports list
2022-08-31 17:11:19.286    Found COM ports:
2022-08-31 17:11:19.287    1: COM1 Communications Port
2022-08-31 17:11:19.287    2: COM11 USB Serial Port
2022-08-31 17:11:19.798    Welcome to Octoplus Huawei Software v.1.3.2.3
2022-08-31 17:11:19.798    
2022-08-31 17:11:19.798    To enable 'Manufacture' mode dial
2022-08-31 17:11:19.798    - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2022-08-31 17:11:19.799    ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2022-08-31 17:11:19.799    - for MTK based models: *#*#14789632#*#*
2022-08-31 17:11:19.799    ProjectMenu > Background Settings > USB Port Settings > Debug Mode
2022-08-31 17:11:19.799    
2022-08-31 17:11:19.799    To enable 'Fastboot' mode
2022-08-31 17:11:19.800    1. Power off the phone. Remove SD and SIM cards
2022-08-31 17:11:19.800    2. Press 'Vol-' and insert USB cable
2022-08-31 17:11:19.800    3. Wait until phone enters 'Fastboot' mode
2022-08-31 17:11:19.800    
2022-08-31 17:11:19.801    To enable 'Upgrade' mode
2022-08-31 17:11:19.801    1. Power off the phone. Remove SD and SIM cards
2022-08-31 17:11:19.801    2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2022-08-31 17:11:19.801    3. Wait until phone enters 'Upgrade mode'
2022-08-31 17:11:20.747    Refreshing serial ports list
2022-08-31 17:11:20.750    Found COM ports:
2022-08-31 17:11:20.751    1: COM1 Communications Port
2022-08-31 17:11:20.751    2: COM11 USB Serial Port
2022-08-31 17:11:20.811    Init finished
2022-08-31 17:13:16.928    Job ID: 00000000018ED556
2022-08-31 17:13:17.500    2022-08-31 17:13:17
2022-08-31 17:13:17.510    Starting Reset Huawei ID
2022-08-31 17:13:17.533    Selected phone model: ART-TL00X
2022-08-31 17:13:20.948    Searching HUAWEI USB COM 1.0 port...
2022-08-31 17:13:25.238    Detected HUAWEI USB COM 1.0 port
2022-08-31 17:13:25.248    Phone connect successfully
2022-08-31 17:13:25.252    Writing bootloader KIRIN710_V1...
2022-08-31 17:13:25.256    Initializing remote service connection...
2022-08-31 17:13:25.429    Writing XLOADER partition...
2022-08-31 17:13:28.218    Writing UCE partition...
2022-08-31 17:13:32.988    Writing FASTBOOT partition...
2022-08-31 17:13:51.734    Bootloader Update successfully
2022-08-31 17:13:51.741    Rebooting to fastboot mode...
2022-08-31 17:13:57.970    Searching Fastboot devices...
2022-08-31 17:13:57.975    Total interfaces: 1
2022-08-31 17:13:57.975    Interface 0 : flags: 1, name(79): \\?\usb#vid_18d1&pid_d00d#7&28f484fa&0&4#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
2022-08-31 17:13:57.976    Found android device: HYJNW18A27001862
2022-08-31 17:13:57.980    Detected Android Sooner Single ADB Interface port
2022-08-31 17:13:57.994    Reading basic data...
2022-08-31 17:13:58.058    Reading product model
2022-08-31 17:14:00.078    Reading build number
2022-08-31 17:14:02.093    Device Model: ART-L29
2022-08-31 17:14:02.109    System: ARTH-L29 10.1.0.248(C185E2R3P1)
2022-08-31 17:14:02.121    Android Version: 10
2022-08-31 17:14:02.129    Base Version: ART-LGRP2-OVS 10.1.0.248
2022-08-31 17:14:02.135    Custom Version: ARTH-L29-CUST 10.1.0.2(C185)
2022-08-31 17:14:02.141    Preload Version: ARTH-L29-PRELOAD 10.1.0.1(C185R3)
2022-08-31 17:14:02.146    C_Version: C185
2022-08-31 17:14:02.152    D_Version: D000
2022-08-31 17:14:02.157    FB Lock State: LOCKED
2022-08-31 17:14:02.161    User Lock State: LOCKED
2022-08-31 17:14:02.851    Connecting to the credit server...
2022-08-31 17:14:02.860    Username: Default_user
2022-08-31 17:14:11.355    Reading product model
2022-08-31 17:14:13.369    Reading build number
2022-08-31 17:14:15.370    Checking balance...
2022-08-31 17:14:16.842    Your balance: 0 credits
2022-08-31 17:14:18.246    Sending device information...
2022-08-31 17:14:19.307    Sending firmware information...
2022-08-31 17:14:20.175    Removing firmware protection...
2022-08-31 17:14:20.459    Connecting to server...
2022-08-31 17:14:22.385    Private enc 0
2022-08-31 17:14:24.413    Waiting for a response from the server...
2022-08-31 17:14:29.421    Writing sign buf data
2022-08-31 17:14:31.217    FB Lock State: UNLOCKED
2022-08-31 17:14:31.790    User Lock State: LOCKED
2022-08-31 17:14:31.795    Reading product model
2022-08-31 17:14:33.763    Reading build number
2022-08-31 17:14:35.771    Reading serial number
2022-08-31 17:14:35.785    Response contains FAIL!
2022-08-31 17:14:35.785    Reading serial number failed
2022-08-31 17:14:37.785    Device Model: ART-L29
2022-08-31 17:14:37.792    System: ARTH-L29 10.1.0.248(C185E2R3P1)
2022-08-31 17:14:38.784    Resetting Huawei ID...
2022-08-31 17:15:12.770    Rebooting device...
2022-08-31 17:15:12.803    Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
2022-08-31 17:15:14.350    Reset Huawei ID done.
2022-08-31 17:15:14.363    Performed by 1.3.2.3 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to Moh3en.pc For This Useful Post:
Old 09-06-2022, 11:26   #362 (permalink)
Insane Poster
 
Join Date: Jan 2018
Posts: 79
Member: 2803352
Status: Offline
Thanks Meter: 41
Arrow Huawei P10 Lite WAS-LX1A‬‬ FRP Reset Done with octoplus Huawei tool

Starting Reset FRP
Selected phone model: WAS-LX1A‬‬
Searching Fastboot devices...
Found android device: 2XJDU17621000250
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪WAS-LX1A‬
Android Version: ‪8.0.0‬
C_Version: ‪C185‬
D_Version: ‪D000‬
Connecting to server...
Writing Reset FRP data...
Reset FRP done.
Performed by ‪1.3.2.3‬ Software version.
  Reply With Quote
The Following 3 Users Say Thank You to faisal naeem For This Useful Post:
Show/Hide list of the thanked
Old 09-06-2022, 14:02   #363 (permalink)
Junior Member
 
Join Date: Nov 2011
Posts: 39
Member: 1696276
Status: Offline
Thanks Meter: 11
JNY-LX1‬ Reset Huawei ID Done

Job ID: 0000000001A2706F
2022-09-06 12:27:40
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX1‬
Selected method: Reset Huawei Id (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V4...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7VMG2068026002
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...

Device Model: ‪JNY-LX1‬
System: ‪JNY-L21 10.1.0.393(C185E5R3P1)‬
Android Version: ‪10‬
Base Version: ‪JNY-LGRP2-OVS 10.1.0.393‬
Custom Version: ‪JNY-L21-CUST 10.1.0.5(C185)‬
Preload Version: ‪JNY-L21-PRELOAD 10.0.1.1(C185R3)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: llmasoud.gsmll
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪JNY-LX1‬
System: ‪JNY-L21 10.1.0.393(C185E5R3P1)‬
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!

Reset Huawei ID done.
Performed by ‪1.3.1‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to masoud_2del For This Useful Post:
Old 09-06-2022, 14:03   #364 (permalink)
Junior Member
 
Join Date: Nov 2011
Posts: 39
Member: 1696276
Status: Offline
Thanks Meter: 11
JNY-LX1‬ Reset Huawei ID Done

Job ID: 0000000001A2706F
2022-09-06 12:27:40
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX1‬
Selected method: Reset Huawei Id (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V4...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7VMG2068026002
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...

Device Model: ‪JNY-LX1‬
System: ‪JNY-L21 10.1.0.393(C185E5R3P1)‬
Android Version: ‪10‬
Base Version: ‪JNY-LGRP2-OVS 10.1.0.393‬
Custom Version: ‪JNY-L21-CUST 10.1.0.5(C185)‬
Preload Version: ‪JNY-L21-PRELOAD 10.0.1.1(C185R3)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: llmasoud.gsmll
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪JNY-LX1‬
System: ‪JNY-L21 10.1.0.393(C185E5R3P1)‬
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!

Reset Huawei ID done.
Performed by ‪1.3.1‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to masoud_2del For This Useful Post:
Old 09-08-2022, 10:16   #365 (permalink)
Junior Member
 
Join Date: Aug 2022
Location: 中国福ॿ
Posts: 1
Member: 3018984
Status: Offline
Thanks Meter: 2
开始自动检测
在 COM17 检测到 Qualcomm Android 设备正在
移除安全保护...
连接到服务器
授权成功

设备型号:TRT-AL00
固件:HL1TRTM-AL00
启动:Chipset-msm8940 5.1.0.1(0LED)_SBL1
系统:系统 5.1.0.78( 0PJ1)
IMEI A: 867271032345760
IMEI B: 867271032479122
Bt MAC 地址: 54:B1:21:61:4E:8F
WiFi MAC 地址: 54:B1:21:61:5E:33
SN: 9YJNW17921003097
Board SN:
NW4KXK17N9代码:all/cn

自动检测完成。
由 1.0.0.1 软件版本执行。

-------------------------------------------------- ----------------------
开始 重置华为 ID
重置您的设备

重置华为 ID 完成。
由 1.0.0.1 软件版本执行。
  Reply With Quote
The Following 2 Users Say Thank You to a0446382 For This Useful Post:
Old 09-25-2022, 13:32   #366 (permalink)
Freak Poster
 
Join Date: Nov 2016
Location: Plumtree, Zimbabwe
Posts: 140
Member: 2647569
Status: Offline
Thanks Meter: 70
Donate money to this user
Huawei Y7P Huawei ID removed successfully

Quote:
Welcome to Octoplus Huawei Software v.‪1.3.2‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM102 HUAWEI USB COM 1.0
2: COM69 RIM Virtual Serial Port v2
3: COM70 RIM Virtual Serial Port v2

Job ID: 00000000019FD918
2022-09-25 12:28:45
Starting Reset Huawei ID
Selected phone model: ‪ART-AL00X‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: DUJNW20602006261
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪ART-L29‬
System: ‪ARTH-L29 10.1.0.248(C185E2R3P1)‬
Android Version: ‪10‬
Base Version: ‪ART-LGRP2-OVS 10.1.0.248‬
Custom Version: ‪ARTH-L29-CUST 10.1.0.2(C185)‬
Preload Version: ‪ARTH-L29-PRELOAD 10.1.0.1(C185R3)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪ART-L29‬
System: ‪ARTH-L29 10.1.0.248(C185E2R3P1)‬
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!

Reset Huawei ID done.
Performed by ‪1.3.2‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to gchipangura For This Useful Post:
Old 10-01-2022, 22:06   #367 (permalink)
Junior Member
 
Join Date: Nov 2010
Posts: 24
Member: 1439198
Status: Offline
Sonork: 22311495
Thanks Meter: 4
Smile JLN-LX1 102.0.1.159(C185E6R1P2) Reset Huawei ID Done

2022-10-01 16:44:07.693 Starting Reset Huawei ID
2022-10-01 16:44:07.709 Selected phone model: JLN-LX1
2022-10-01 16:44:19.901 Downloading resource...
2022-10-01 16:44:20.742 Searching Qualcomm HS-USB QDLoader 9008 port...
2022-10-01 16:44:20.742 Please, reconnect battery, connect USB cable with attached Test Point on your phone!
2022-10-01 16:44:20.742 Detected Qualcomm HS-USB QDLoader 9008 port
2022-10-01 16:44:20.773 Connecting to device...
2022-10-01 16:44:20.788 Hadshaking...
2022-10-01 16:44:20.804 Reading bootloader info...
2022-10-01 16:44:23.739 OEM PK HASH: B25DECD85D217F5D9B53DC3C42EF7846DCEF59DD3E0AF4D126 06199F5099FF23
2022-10-01 16:44:23.754 MSM HW ID: 001B80E1
2022-10-01 16:44:23.770 Serial Number: C99DF7F2
2022-10-01 16:44:23.785 Sending loader Qualcomm Snapdragon 680V.0.mbn...
2022-10-01 16:44:23.853 Loader send successfully
2022-10-01 16:44:23.858 Reconnecting, please wait...
2022-10-01 16:44:35.441 Configuring device...
2022-10-01 16:44:40.704 Reading partition table...
2022-10-01 16:44:51.617 Creating backup...
2022-10-01 16:44:51.655 Rawprogram file created successfully.
2022-10-01 16:44:53.461 Searching for Huawei Id protection...
2022-10-01 16:44:53.483 Resetting Huawei Id...
2022-10-01 16:45:07.833 Performing factory reset...
2022-10-01 16:45:09.671 Please perform the factory reset operation manually through the recovery mode if the operation was not done automatically
2022-10-01 16:45:18.832 Reset Huawei ID done.
2022-10-01 16:45:18.854 Performed by 1.3.2.3 Software version.
  Reply With Quote
The Following User Says Thank You to by-slimanto For This Useful Post:
Old 10-28-2022, 12:19   #368 (permalink)
No Life Poster
 
allumts's Avatar
 
Join Date: Apr 2011
Age: 56
Posts: 16,168
Member: 1564612
Status: Offline
Thanks Meter: 12,214
Donate money to this user
Thumbs up "world first" huawei tablet bah3-l09 kirin 810 removed "huawei id" from octopus

"WORLD FIRST" HUAWEI TABLET "BAH3-L09" KIRIN 810, (NOT BAH2 or LOWER) REMOVED "HUAWEI ID" WITH SUCCESS BY OCTOPUS HUAWEI

LOOCK CAREFULLY LOG, BECOUSE THERE ARE ALL TRICKS!!!

IF FIRMWARE IS IN EMUI 10 OR HIGHER, "MANDATORY" GOOD "NEMESIS CABLE"

Quote:
Job ID: 0000000001AD4A3E
2022-10-28 09:52:28
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX1‬
Selected method: Reset Huawei Id (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V4...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: NU198XXXXXXXX
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪BAH3-L09‬
System: ‪BAH3-L09 10.1.0.230(C432E4R1P3)‬
Android Version: ‪10‬

Base Version: ‪BAH3-LGRP2-OVS 10.1.0.230‬
Custom Version: ‪BAH3-L09-CUST 10.1.0.4(C432)‬
Preload Version: ‪BAH3-L09-PRELOAD 10.1.0.3(C432R1)‬
C_Version: ‪C432‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪BAH3-L09‬
System: ‪BAH3-L09 10.1.0.230(C432E4R1P3)‬
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by ‪1.3.3‬ Software version.
DEVICE DONE:



Thanks OCTOPUS DEVELOPERS FOR XLOADER

BR
Allumts
  Reply With Quote
The Following User Says Thank You to allumts For This Useful Post:
Old 11-01-2022, 08:45   #369 (permalink)
Insane Poster
 
Join Date: Jan 2018
Posts: 79
Member: 2803352
Status: Offline
Thanks Meter: 41
Huawei MediaPad T3 ‪AGS-L09‬ FRP Lock Remove Done with Octoplus Huawei Tool

Starting Reset FRP
Selected phone model: ‪AGS-L09‬
Searching Fastboot devices...
Found android device: HEKNU19823104187
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪AGS-L09‬
System: ‪AGS-L09C199B281‬
C_Version: ‪C199‬
D_Version: ‪D001‬
Connecting to server...
Writing Reset FRP data...
Reset FRP done.
Performed by ‪1.3.2.3‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to faisal naeem For This Useful Post:
Old 11-04-2022, 15:54   #370 (permalink)
Freak Poster
 
Join Date: Nov 2016
Location: Plumtree, Zimbabwe
Posts: 140
Member: 2647569
Status: Offline
Thanks Meter: 70
Donate money to this user
Post here success stories with Octoplus Huawei Tool

HUAWEI P Smart 2019 IMEI repair Done
Thanks to [mention]yuranc8 [/mention]

Code:
 Welcome to Octoplus Huawei Software v. 1.3.2 

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM115 HUAWEI USB COM 1.0
2: COM69 RIM Virtual Serial Port v2
3: COM70 RIM Virtual Serial Port v2

Job ID: 0000000001B032F4
2022-11-04 14:14:37
Starting Read Cert
Selected phone model:  POT-LX1 
Searching HUAWEI USB COM 1.0 port...
Detected  HUAWEI USB COM 1.0  port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing  XLOADER  partition...
Writing  UCE  partition...
Writing  FASTBOOT  partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: BSN4C19218000866
Detected  Android Sooner Single ADB Interface  port
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State:  UNLOCKED 
User Lock State:  LOCKED 
Device Model:  POT-LX1AF 
System:  POT-L01AF 12.0.0.224(C185E2R1P1) 
Reading certificate files...
Reading certificate for IMEI A...
Reading certificate for IMEI B...
Error: Can't get current certificate file!
Warning: Skipping read certificate for IMEI B
Rebooting device...

Read Cert done.
Performed by  1.3.2  Software version.
Selected IMEI_A file: C:/Users/gchip/Desktop/Firmware/POT-LX1/POT-LX1/POT-LX1_IMEI_SLOT_1_862266040XXXXXX.obf

Job ID: 0000000001952C33
2022-11-04 14:23:33
Starting Write Cert
Selected phone model:  POT-LX1 
Searching HUAWEI USB COM 1.0 port...
Detected  HUAWEI USB COM 1.0  port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing  XLOADER  partition...
Writing  UCE  partition...
Writing  FASTBOOT  partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: BSN4C19218000866
Detected  Android Sooner Single ADB Interface  port
Username: Default_user
Connecting to the credit server...
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State:  UNLOCKED 
User Lock State:  LOCKED 
Device Model:  POT-LX1AF 
System:  POT-L01AF 12.0.0.224(C185E2R1P1) 
Saving backup of MODEM_SECURE...
Saving backup of OEMINFO...
Reading secure data...
Writing certificate files...
Warning: Can`t find imei block!
Warning: The oeminfo partition may be corrupted. In case of imei was not changed properly, you need to restore oeminfo partition!
Rebooting device...

Write Cert done.
Performed by  1.3.2  Software version.
Code:
Before


Code:
After




Sent from my iPhone using Tapatalk

Last edited by gchipangura; 11-04-2022 at 16:01.
  Reply With Quote
The Following 3 Users Say Thank You to gchipangura For This Useful Post:
Show/Hide list of the thanked
Old 11-13-2022, 16:42   #371 (permalink)
Crazy Poster
 
Join Date: May 1999
Location: azaz arashad
Posts: 57
Member: 45
Status: Offline
Thanks Meter: 9
Huewei y9 2019 by test points

Quote:
Originally Posted by Octopus box View Post
Post here success stories with Octoplus Huawei Tool.
Welcome to Octoplus Huawei Software v.‪1.3.2‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 Intel(R) Active Management Technology - SOL
2: COM1 Communications Port
3: COM94 USB Serial Port

Job ID: 0000000001B977A7
2022-11-13 15:25:37
Starting Reset FRP
Selected phone model: ‪JKM-LX1‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: DEFNW18C21004787
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪JKM-LX1‬
System: ‪JKM-LX1 9.1.0.309(C185E2R1P1)‬
Android Version: ‪9‬
Base Version: ‪JKM-LGRP2-OVS 9.1.0.309‬
Custom Version: ‪JKM-LX1-CUST 9.1.0.2(C185)‬
Preload Version: ‪JKM-LX1-PRELOAD 9.1.0.1(C185R1)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪JKM-LX1‬
System: ‪JKM-LX1 9.1.0.309(C185E2R1P1)‬
MEID: ‪00000000000000‬
IMEI A: ‪86696304‬
IMEI B: ‪86696304‬
S/N: ‪DEFNW18C21004787‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP done.
Performed by ‪1.3.2‬ Software version.
  Reply With Quote
The Following User Says Thank You to .::Gorbagy::. For This Useful Post:
Old 11-20-2022, 12:45   #372 (permalink)
Crazy Poster
 
Join Date: May 1999
Location: azaz arashad
Posts: 57
Member: 45
Status: Offline
Thanks Meter: 9
Test point photo

https://ibb.co/Hg5qT5C

octoplus tool photo

https://ibb.co/bRHVLCz

huawei y6p

Job ID: 0000000001B68D81
2022-11-20 11:15:38
Starting Reset Huawei ID
Selected phone model: ‪MED-LX9‬
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected ‪MediaTek USB Port‬ port
Handshake done

Detecting Chip Version...
HW Chip : MT6765
HW Version : 8A00.CA00.0000.0000
Initializing remote service connection...
Downloading Mtk Loader...
Writing loader...
DA successfully sent
Reconnecting...
Detected ‪MediaTek PreLoader USB VCOM (Android)‬ port
Initializing remote service connection...
Downloading special secure data...
Writing special secure data...
Reading secure data dump...
Writing secure data dump...
Resetting Huawei ID...
Please perform "Factory reset" manually via Recovery Mode, if your device doesn`t work properly!

Reset Huawei ID done.
Performed by ‪1.3.2‬ Software version.
  Reply With Quote
The Following 2 Users Say Thank You to .::Gorbagy::. For This Useful Post:
Old 11-25-2022, 09:08   #373 (permalink)
No Life Poster
 
cellcare prasad's Avatar
 
Join Date: Oct 2007
Location: VIZAG,A.P, INDIA
Posts: 2,028
Member: 602547
Status: Offline
Sonork: 100.1621466
Thanks Meter: 915
Huawei stk-l22 frp done with octopus huawei tool

HUAWEI STK-L22 FRP DONE WITH OCTOPUS HUAWEI TOOL




BRO
PRASAD
  Reply With Quote
The Following 2 Users Say Thank You to cellcare prasad For This Useful Post:
Old 11-29-2022, 12:04   #374 (permalink)
Freak Poster
 
Join Date: Nov 2016
Location: Plumtree, Zimbabwe
Posts: 140
Member: 2647569
Status: Offline
Thanks Meter: 70
Donate money to this user
Huawei Mate Pro FRP LYA-L09 done
Quote:
Welcome to Octoplus Huawei Software v.‪1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM105 HUAWEI USB COM 1.0
2: COM69 RIM Virtual Serial Port v2
3: COM70 RIM Virtual Serial Port v2

Job ID: 000000000191992F
2022-11-29 10:53:56
Starting Read Info
Selected phone model: ‪LYA-L09‬
Selected method: Read Info (EMUI 11)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN980_V3...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 7N5GSJ18BC152616
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪LYA-L09‬
System: ‪LYA-L09 9.0.0.126(C316E11R1P16)‬
Android Version: ‪9‬
Base Version: ‪LYA-LGRP2-OVS 9.0.0.126‬
Custom Version: ‪LYA-L09-CUST 9.0.0.11(C316)‬
Preload Version: ‪LYA-L09-PRELOAD 9.0.0.16(C316R1)‬
C_Version: ‪C316‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Read Info done.
Performed by ‪1.3.3‬ Software version.

Job ID: 0000000001B9D273
2022-11-29 10:55:50
Starting Reset FRP
Selected phone model: ‪LYA-L09‬
Selected method: Reset Frp (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Canceling... Please be patient!
Reset FRP canceled.
Performed by ‪1.3.3‬ Software version.

Job ID: 0000000001BEA827
2022-11-29 10:57:20
Starting Reset FRP
Selected phone model: ‪LYA-L09‬
Selected method: Reset Frp (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN980_V5...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 7N5GSJ18BC152616
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪LYA-L09‬
System: ‪LYA-L09 9.0.0.126(C316E11R1P16)‬
Android Version: ‪9‬
Base Version: ‪LYA-LGRP2-OVS 9.0.0.126‬
Custom Version: ‪LYA-L09-CUST 9.0.0.11(C316)‬
Preload Version: ‪LYA-L09-PRELOAD 9.0.0.16(C316R1)‬
C_Version: ‪C316‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: Default_user
Warning: The phone contains an unknown firmware version. Make sure you follow the correct method for this operation.
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪LYA-L09‬
System: ‪LYA-L09 9.0.0.126(C316E11R1P16)‬
MEID: ‪A000009C183F96‬
IMEI A: ‪869161031463953‬
IMEI B: ‪869161031463953‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.3‬ Software version.
  Reply With Quote
The Following User Says Thank You to gchipangura For This Useful Post:
Old Yesterday, 21:28   #375 (permalink)
Freak Poster
 
Join Date: May 2007
Location: Meetiyagoda
Posts: 108
Member: 504925
Status: Offline
Thanks Meter: 45
Donate money to this user
Huawei P30 (PPA-LX2) Huawei ID Remove Successfully Test Point with Octoplus Huawei

Welcome to Octoplus Huawei Software v.‪1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM82 USB Serial Port
2: COM15 RIM Virtual Serial Port v2
3: COM16 RIM Virtual Serial Port v2

Job ID: 0000000001BB97BF
2022-12-03 19:53:32
Starting Reset Huawei ID
Selected phone model: ‪ELE-AL00‬
Selected method: Reset Huawei Id (EMUI 11)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN980_V3...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 026RXT197H002650
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪ELE-AL00‬
System: ‪ELE-AL00 11.0.0.142(C00E142R2P5)‬
Android Version: ‪10‬
Base Version: ‪ELE-LGRP1-CHN 11.0.0.142‬
Custom Version: ‪ELE-AL00-CUST 11.0.0.142(C00)‬
Preload Version: ‪ELE-AL00-PRELOAD 11.0.0.5(C00R2)‬
C_Version: ‪C00‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: kalumxxxx
Checking balance...
Your balance: 10 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪ELE-AL00‬
System: ‪ELE-AL00 11.0.0.142(C00E142R2P5)‬
MEID: ‪A00000AEFDDxxx‬
IMEI A: ‪8643580458xxxxx‬
IMEI B: ‪8643580459xxxxx
Writing secure data...
Resetting Huawei ID...
Reset Huawei ID done.
Performed by ‪1.3.3‬ Software version.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 20:29.



Powered by Searchlight © 2022 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2022 -
Page generated in 0.14550 seconds with 8 queries

SEO by vBSEO