Nokia 6.1 TA-1054 - GSM-Forum

spinky360 · 05-27-2019, 22:11

Code:

RUNNING NTool 0.049
 
SELECT FIRMWARE PACKAGE
Will flash : PL2-3270-0-00CN-00WW.NBx
PLEASE CONNECT POWERED OFF PHONE
PHONE "PL2GAM1811800045" CONNECTED
Project : PL21
model : P2C
sub_model : none
software version : 
SW model : 
build number : 
hardware version : 5.0
RF band id : G_850_900_1800_1900^W_1_2_5_8^C_0^T_34_39^L_1_3_
secure : yes
Bootloader type : commercial
Download size : 00000384 mB
Security version : 0004
Challenge : 04F21EB37B6BDC74C0C3BECE27CD5EA05E63CE2F
Waiting for calculation process ...
RESPONSE: "SUCCESS" [256]
BOOTLOADER AUTH PASSED
Flash "B2N-0-3270-xbl_service.zip" to "xbl_a"
FATAL ERROR: Failed to write "xbl_a", error : "(xbl_a) No such partition"
Elapsed: 2 secs.

Any Help ?

juwelrana091 · 05-27-2019, 22:46

Dont flash this....it will brick ur device

Sent from my TA-1054 using Tapatalk

spinky360 · 05-27-2019, 23:43

Quote:

Originally Posted by juwelrana091

Dont flash this....it will brick ur device

Sent from my TA-1054 using Tapatalk

Is already bircked ...

is just in download mode and wont exit... there isnt nothing except testpoint ?

juwelrana091 · 05-28-2019, 02:53

Test point is only a solution...u can check if ur boot is ok or not... download minimal adb .....type fastboot devices
See, if ur device recognize, then knock me...
Telegram @juwelrana091

Sent from my TA-1054 using Tapatalk

spinky360 · 05-28-2019, 07:30

Quote:

Originally Posted by juwelrana091

Test point is only a solution...u can check if ur boot is ok or not... download minimal adb .....type fastboot devices
See, if ur device recognize, then knock me...
Telegram @juwelrana091

Sent from my TA-1054 using Tapatalk

Bootloader is ok. i cant add you on telegream. if you have skype or soething

the_laser · 05-28-2019, 11:12

the only solution : Nokia6.Plate2.PL2/BootFix

juwelrana091 · 05-28-2019, 11:42

Bootfix https://drive.google.com/file/d/1RjB...w?usp=drivesdk

Sent from my TA-1054 using Tapatalk

spinky360 · 05-30-2019, 21:40

Hello again ... did test point but is starting direct in download mode.
I took test point with Positive from battery like in Read Me file ..., put an 3.5 battery positive on that point and gnd to gnd ... still the same
P.S. managed to save the display

))
Any ideeas ? thanks

the_laser · 05-30-2019, 23:07

you did something wrong.
follow guide to the letter and all will be fine.

for example, first disconnect phone from battery and usb cable, connect testpoint to +3.3 ( at least +1.8 ), then connect usb cable and detach testpoint

if you using battery terminal, then you need to connect testpoint, attach battery, attach usb cable, detach testpoint .

spinky360 · 06-04-2019, 21:31

Quote:

Originally Posted by the_laser

you did something wrong.
follow guide to the letter and all will be fine.

for example, first disconnect phone from battery and usb cable, connect testpoint to +3.3 ( at least +1.8 ), then connect usb cable and detach testpoint

if you using battery terminal, then you need to connect testpoint, attach battery, attach usb cable, detach testpoint .

Nothing is working
Did: disconnect battery - Outside Power 3.3v - > connect battery -> connect USB - direct in download mode
Same with battery terminal.... - Direct in download mode ...
any other ideea ?

juwelrana091 · 06-05-2019, 07:07

Quote:

Originally Posted by spinky360

Nothing is working

Did: disconnect battery - Outside Power 3.3v - > connect battery -> connect USB - direct in download mode

Same with battery terminal.... - Direct in download mode ...

any other ideea ?

Knock me...i faced same problem... And i solved it by myself

Sent from my TA-1054 using Tapatalk

spinky360 · 06-07-2019, 00:06

Quote:

Originally Posted by juwelrana091

Knock me...i faced same problem... And i solved it by myself

Sent from my TA-1054 using Tapatalk

Could you pleas post the solution here ? there are other ppl like me ... this is why we are a forum ... Thanks

juwelrana091 · 06-07-2019, 16:59

First connect battery ,short 2 pin then connect usb with pc....check driver if show Qualcomm port 9008... update it to qloader 9008.then flash TA1054 stock firmware nbo format with emergency download mode.....it failed but dont worry...now try same firmware with ntool...it take flash

Sent from my TA-1054 using Tapatalk

juwelrana091 · 06-07-2019, 17:01

https://drive.google.com/file/d/11sX...w?usp=drivesdk

Sent from my TA-1054 using Tapatalk

juwelrana091 · 06-07-2019, 18:41

https://drive.google.com/file/d/11sX...w?usp=drivesdk
Here is 2 pin for Short

Sent from my TA-1054 using Tapatalk

05-30-2019, 21:40	#8 (permalink)
spinky360 Freak Poster Join Date: Dec 2007 Posts: 134 Member: 644581 Status: Offline Thanks Meter: 16	Hello again ... did test point but is starting direct in download mode. I took test point with Positive from battery like in Read Me file ..., put an 3.5 battery positive on that point and gnd to gnd ... still the same P.S. managed to save the display)) Any ideeas ? thanks

05-27-2019, 22:46	#2 (permalink)
juwelrana091 Freak Poster Join Date: May 2018 Posts: 167 Member: 2835334 Status: Offline Thanks Meter: 23	Dont flash this....it will brick ur device Sent from my TA-1054 using Tapatalk

05-28-2019, 02:53	#4 (permalink)
juwelrana091 Freak Poster Join Date: May 2018 Posts: 167 Member: 2835334 Status: Offline Thanks Meter: 23	Test point is only a solution...u can check if ur boot is ok or not... download minimal adb .....type fastboot devices See, if ur device recognize, then knock me... Telegram @juwelrana091 Sent from my TA-1054 using Tapatalk

05-28-2019, 11:12	#6 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,150	the only solution : Nokia6.Plate2.PL2/BootFix

05-28-2019, 11:42	#7 (permalink)
juwelrana091 Freak Poster Join Date: May 2018 Posts: 167 Member: 2835334 Status: Offline Thanks Meter: 23	Bootfix https://drive.google.com/file/d/1RjB...w?usp=drivesdk Sent from my TA-1054 using Tapatalk

05-30-2019, 23:07	#9 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,150	you did something wrong. follow guide to the letter and all will be fine. for example, first disconnect phone from battery and usb cable, connect testpoint to +3.3 ( at least +1.8 ), then connect usb cable and detach testpoint if you using battery terminal, then you need to connect testpoint, attach battery, attach usb cable, detach testpoint .

06-07-2019, 16:59	#13 (permalink)
juwelrana091 Freak Poster Join Date: May 2018 Posts: 167 Member: 2835334 Status: Offline Thanks Meter: 23	First connect battery ,short 2 pin then connect usb with pc....check driver if show Qualcomm port 9008... update it to qloader 9008.then flash TA1054 stock firmware nbo format with emergency download mode.....it failed but dont worry...now try same firmware with ntool...it take flash Sent from my TA-1054 using Tapatalk

06-07-2019, 17:01	#14 (permalink)
juwelrana091 Freak Poster Join Date: May 2018 Posts: 167 Member: 2835334 Status: Offline Thanks Meter: 23	https://drive.google.com/file/d/11sX...w?usp=drivesdk Sent from my TA-1054 using Tapatalk

06-07-2019, 18:41	#15 (permalink)
juwelrana091 Freak Poster Join Date: May 2018 Posts: 167 Member: 2835334 Status: Offline Thanks Meter: 23	https://drive.google.com/file/d/11sX...w?usp=drivesdk Here is 2 pin for Short Sent from my TA-1054 using Tapatalk