★★★ Post All Successfully Repaired Phones by Hydra Tool ★★★

[Dipendra Pathak]

Cherry Mobile Flare S8 FRP partition successfully removed by Hydra Tool

1. Run MTK Tool and choose "SOSC".
2. Choose Brand and Module as AUTO.
3. Go to "Service"--> "Tool"
4. Choose "Factory format Protection (FRP)"
5. Choose "Auto" from "Method / Option" drop down menu..
6. Click "Execute"
7. Connect device to computer using USB Data Cable.
8. Wait until the operation is completed

Screen Short:



Logs:

=====================================
Searching for MTK Device...Found
Port Identification :Flashmode Preloader
FriendlyName :MediaTek PreLoader USB VCOM (Android) (COM54)
Device :5&c4f6ec7&0&5
SymbolicName :\??\USB#VID_0E8D&PID_2000#5&c4f6ec7&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver :09/11/2014,3.0.1437.1

Handshaking...Ok

Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0690MT6763T [6763]
hw subcode : 8A00
hw version : CA01
sw version : 0001
Target config : 00
SB : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SECURE VERSION : 00
BL VERSION : 03

Preparing Download Agent..
DA : 6763.bin
Agent: MTK_DOWNLOAD_AGENT -HYDRA
Ver : MTK_AllInOne_DA_v3.3001.2020-11-03.22:07_536568
Init : Loader [1]
Sending : Accepted

Identifying Protocol...
Protocol : New
Synchronization...SYNC
Mode : preloader

Execute Secondary Loader
Init : Loader [2]
Executing : SYNC

Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 849634FC16443A1E44DCCD70573D1CFC
ERAM Size : 0x0000000000040000 -256 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000747C00000 -29.121 GB
eMMC CID : 90014A68423861503E020F4C414D44C7 - hB8aP>

DA Speed : high-speed

Reading GPT-EMMC [0x00008000] 130 Items

Reading System Info
Brand : Cherry_Mobile
Vendor : Cherry_Mobile
Model : Flare S8
ID : PPR1.180610.011
SDK : 28
Release : 9
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_g1860ps_v2_gh_fng_g33scr_p-user 9 PPR1.180610.011 1205211558 release-keys
Device : X930
Display ID : Cherry_X930_Flare_S8_12052019_v1
Security Patch : 2019-12-05
FRPPST : /dev/block/platform/bootdevice/by-name/frp
Fingerprint : Cherry_Mobile/Flare_S8/X930:9/PPR1.180610.011/1205211558:user/release-keys
StorageType : mtp
Userdata State : Encrypted

Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
-> Renaming Preloader.... preloader_g1860ps_v2_gh_fng_g33scr_p.bin
Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0690_Cherry_Mobile_Flare_S8_X930 _9_PPR1.180610.011_1205211558_062021085608\MT6763T _Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x03588000]1024 KB ->frp.bin...Ok
-nvdata[0x05688000]64 MB ->nvdata.bin...Ok
-protect1[0x0B688000]8 MB ->protect1.bin...Ok
-protect2[0x0BE88000]9.469 MB ->protect2.bin...Ok
-persist[0x0D000000]48 MB ->persist.bin...Ok
-nvram[0x17800000]64 MB ->nvram.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0690_Cherry_Mobile_Flare_S8_X930 _9_PPR1.180610.011_1205211558_062021085608
MTK Phone Loader is NOW RUNNING.

Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 849634FC16443A1E44DCCD70573D1CFC
ERAM Size : 0x0000000000040000 -256 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000747C00000 -29.121 GB
eMMC CID : 90014A68423861503E020F4C414D44C7 - hB8aP>

Reading GPT-EMMC [0x00008000] 130 Items


Reading System Info
Brand : Cherry_Mobile
Vendor : Cherry_Mobile
Model : Flare S8
ID : PPR1.180610.011
SDK : 28
Release : 9
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_g1860ps_v2_gh_fng_g33scr_p-user 9 PPR1.180610.011 1205211558 release-keys
Device : X930
Display ID : Cherry_X930_Flare_S8_12052019_v1
Security Patch : 2019-12-05
FRPPST : /dev/block/platform/bootdevice/by-name/frp
Fingerprint : Cherry_Mobile/Flare_S8/X930:9/PPR1.180610.011/1205211558:user/release-keys
StorageType : mtp
Userdata State : Encrypted

-------------------------------------
Operation : Auto
Processing...
ZeroWipe FRP Partition... Ok

Elapsed Time : 00:00:45

BR
Dipendra Pathak

[Dipendra Pathak]

Xiaomi Redmi Note 7 (Lavender) Successfully flashed by Hydra Tool

1. Run Hydra Qualcomm Module and Sosc.
2. Choose Brand and Module or leave it as "Auto"
3. Go to "Flash Tool" Tab.
4. Choose Flash file and its location.
5. Click on "Flash"
6. connect device to the computer with USB Data cable
7. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Huawei MEDLX9 (Y6P 2020) Restoring OEM Info successfully done by Hydra Tool

1. Run MTK tool of Hydra Dongle.
2. Choose Correct Module and Brand.
3. Go to "Service" -- > "Tool"
4. choose "Huawei".
5. Choose "Restore OEM info" from "Method / Option" of drop down menu.
6. Click on "Execute" and connect device with computer using USB cable.
7. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Xiaomi Redmi 5 Plus (Vince) restoring QCN successfully done by Hydra Tool

1. Run Hydra Qualcomm Module and Sosc.
2. Choose Brand and Module or leave it as "Auto"
3. Go to "Repair and calibration" Tab.
4. Choose "EQCNFile" file and its location.
5. Tick "Enable IMEI 1"
6. Click on "Restore QCN"
7. connect device to the computer with USB Data cable
8. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Xiaomi Mi A3 (Bamboo) Fastboot format user data successfully done by Hydra Tool

1. Run Hydra Qualcomm Module and Sosc.
2. Choose Brand and Module
3. Go to "Service"-->"Xiaomi" Tab.
4. Choose "Factory user data" from fastboot mode.
5. Take cellphone or device into fastboot mode.
6. Tick "include FRP" if you want to do FRP.
7. connect device to the computer with USB Data cable
8. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Oppo A15 (CPH 2185) formatting user data successfully removed by Hydra Tool

1. Run Hydra MTK Module and Sosc.
2. Choose Brand and Module
3. Go to "Service"-->"Tool" Tab.
4. Choose "Ultra Power Option" from fastboot mode.
5. Choose "Erase user data" from "Method/ Option" from drop down method.
6. connect device to the computer with USB Data cable
7. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Huawei MRD-LX2 (Y6 2019) formatting user data using Ultra Power done by Hydra Too

1. Run Hydra MTK Module and Sosc.
2. Choose Brand and Module
3. Go to "Service"-->"Tool" Tab.
4. Choose "Ultra Power Option" from fastboot mode.
5. Choose "Erase user data" from "Method/ Option" from drop down method.
6. connect device to the computer with USB Data cable
7. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Another Huawei MEDLX9 (Y6P 2020) Restoring OEM Info successfully done by Hydra Too

1. Run MTK tool of Hydra Dongle.
2. Choose Correct Module and Brand.
3. Go to "Service" -- > "Tool"
4. choose "Huawei".
5. Choose "Restore OEM info" from "Method / Option" of drop down menu.
6. Click on "Execute" and connect device with computer using USB cable.
7. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Xiaomi Redmi 4a (Rolex) FRP successfully done by Hydra Tool

1. Run Hydra Qualcomm Module
2. Choose Brand and Module
3. Go to "Service"--> "Universal" Tab.
4. Choose "Factory Reset Protection" from drop down menu.
5. Click on "auto" from flash mode
6. Click "Execute"
7. connect device to the computer with USB Data cable
8. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Huawei FRL23 (Y9A 2021) Backing Partition successfully done by Hydra Tool

1. Run MTK tool of Hydra Dongle.
2. Choose Correct Module and Brand.
3. Go to "Service" -- > "Tool"
4. choose "Backup Partition" from universal option.
5. Choose "Backup stock ROM" from "Method / Option" of drop down menu.
6. Click on "Execute" and connect device with computer using USB cable.
7. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Samsung SM-A125F (A12) formatting selected partition (Persistence) done by Hydra Tool

1. Run Hydra MTK Module and Sosc.
2. Choose Brand and Module
3. Go to "PM" Tab.
4. Choose "Flash Mode" from fastboot mode.
5. Click "Read" and wait few second
6. Choose Selected partition like "Presistence" here
7. Choose format / erase ect according to your need.
8. connect device to the computer with USB Data cable
9. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Huawei FRL-L23 (Y9A) Double IMEI Repair within minute done by Hydra Tool

1. Run Hydra MTK Tool
2. Choose Brand and Module
3. Go to "Service"--> "Repair IMEI"
4. Tick "IMEI change....Illigal......
5. Choose "Huawei Flash Mode" from drop down menu.
6. Tick both IMEI to active box and type both IMEI as written in battery housing of the cellphone.
7. Click on "Repair IMEI"
8. Connect cellphone with computer using USB Data Cable.
9. Wait until the operation is completed.

Screen Short:



Logs:

BR
Dipendra Pathak

[Dipendra Pathak]

Xiaomi Redmi 9a (DANDELION) Mi Account plus FRP successfully removed by Hydra Tool

1. Run Hydra MTK Module and Sosc.
2. Choose Brand and Module.
3. Go to "Service"-->"Tool" Tab.
4. Choose "Xiaomi".
5. Click on "Remove Mi Account (Erased Method) + FRP" from drop down menu.
6. Click "Execute" button
7. connect device to the computer with USB Data cable
8. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Xiaomi Redmi MICRON Note 7 (Lavender) removed Mi Account successfully done by Hydra

1. Run Hydra Qualcomm module.
2. Choose Brand and Module.
3. Go to "Service"-->"Xioami" Tab.
4. Choose "Mi Account" from drop down menu.
5. Choose "Remove Mi Account (New Method) from flash mode.
6. Click "Execute" button
7. connect device to the computer with USB Data cable
8. Wait until the process is completed.

Screen Short:

BR
Dipendra Pathak

[Dipendra Pathak]

Xiaomi Redmi Note 9 (Merlin) successfully flashed by Hydra Tool

1. Run Hydra MTK Module and Sosc.
2. Choose Brand and Module or leave it as "Auto"
3. Go to "Flash Tool" Tab.
4. Choose Flash file and its location.
5. Click on "Flash"
6. connect device to the computer with USB Data cable
7. Wait until the process is completed.

Note : you can also choose auto reboot, enable write preloader, format before flashing just above "Execute" button.

Screen Short:

BR
Dipendra Pathak