★★★ Post All Successfully Repaired Phones by Hydra Tool ★★★ - Page 173 - GSM-Forum

**Dipendra Pathak** · 09-22-2021, 14:02

Xiaomi Redmi Note 9 (Merlin) erasing NVRAM and NVDATA done by Hydra Tool

1. Run Hydra Tool MTK Module.
2. Choose Brand and Module.
3. Tick "Auto Broom Exploit", "Enable UBL Loader" and "Enable Auto PrelDUMP"
4. Go to "Servic"--> "Tool"
5. Choose "NOn-Volatile Random Access Memory (NVRAM)
6. Choose "Erase NVRAM and NVDATA" from drop down menu.
7. Tick "Auto Reboot"
8. Connect cellphone to computer using USB Data Cable.
9. Wait until the operation is completed.

Screen Short:

BR
Dipendra Pathak

**Dipendra Pathak** · 09-22-2021, 14:10

Generic SC7731E SPD device's FRP succ3essfully removed by Hydra Tool

1. Run Hydra Tool SPD Module.
2. Choose Brand and Module.
3. Go to "Service"--> "Tool"
4. Choose "Factory Reset Protection"
5. Choose "FRP remove" from Flash mode
6. Tick "Auto Reboot"
7. Connect cellphone to computer using USB Data Cable.
8. Wait until the operation is completed.

Screen Short:

BR
Dipendra Pathak

Gsm-Ahmed · 09-25-2021, 14:01

Condor T2 SP9832A Remove FRP

Gsm-Ahmed · 09-25-2021, 14:03

Xiaomi Redmi 9a (dandelion) Ultra Power Option

Code:

Searching for MTK Device...Found
 Port Identification :Flashmode BROM 
 FriendlyName :MediaTek USB Port_V1633 (COM21)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..
Handshaking...Ok

Identifying Hardware ID.....
Reading Device hardware info..
 hw code       : 0766MT6765 [6765]
 hw subcode    : 8A00
 hw version    : CA00
 sw version    : 0000
 Target config : E7
 SBC           : 01 (True)
 SLA           : 02 (True)
 DAA           : 04 (True)
 SWJTAG        : 06 (True)
 EPP           : 00 (False)
 CERT          : 00 (False)
 MEMREAD       : 20 (True)
 MEMWRITE      : 40 (True)
 CMD_C8        : 80 (True)

Exploiting Device...
Exploit Sent..
Successfully Exploited...
Handshaking...Ok

C:\Hydra Tool\Backup\Preloader_dump\prel.tmp
Handshaking...

Identifying Hardware ID.....
Reading Device hardware info..
 hw code       : 0766MT6765 [6765]
 hw subcode    : 8A00
 hw version    : CA00
 sw version    : 0000
 Target config : 00
 SBC           : 00 (False)
 SLA           : 00 (False)
 DAA           : 00 (False)
 SWJTAG        : 00 (False)
 EPP           : 00 (False)
 CERT          : 00 (False)
 MEMREAD       : 00 (False)
 MEMWRITE      : 00 (False)
 CMD_C8        : 00 (False)

MEID : E2E4E225A8924384B84CE31F0F10041A
Stage 1..[Size:216440]
 Sending :  Please wait.. Accepted

Identifying Protocol...
 Protocol : New
 Synchronization...SYNC
 Preloader Initialization...
 Parsing prel.tmp
 Init : Accepted
 Executing : SYNC

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : CA9D407118507F70DD498F4E8606FA5A
 ERAM Size  : 0x0000000000038000 -224 KB
 IRAM Size  : 0x0000000080000000 -2 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000001000000 -16 MB
 eMMC USER  : 0x0000000747C00000 -29.121 GB
 eMMC CID   : 4501004441343033320195F43E1337F9 - DA4032
 Executing : ACCEPTED...

Reading GPT-EMMC [0x00008000] 130 Items

Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
   -> Renaming Preloader....  preloader_k62v1_64_bsp.bin
   Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0766__092521105711\MT6765_Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x3BD88000]1024 KB ->frp.bin...Ok
-nvdata[0x3DE88000]64 MB ->nvdata.bin...Ok
-protect1[0x45522000]8 MB ->protect1.bin...Ok
-protect2[0x45D22000]10.867 MB ->protect2.bin...Ok
-persist[0x47000000]48 MB ->persist.bin...Ok
-nvram[0x52E80000]64 MB ->nvram.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0766__092521105711
MTK Phone Loader is NOW RUNNING.

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : CA9D407118507F70DD498F4E8606FA5A
 ERAM Size  : 0x0000000000038000 -224 KB
 IRAM Size  : 0x0000000080000000 -2 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000001000000 -16 MB
 eMMC USER  : 0x0000000747C00000 -29.121 GB
 eMMC CID   : 4501004441343033320195F43E1337F9 - DA4032

Reading GPT-EMMC [0x00008000] 130 Items


-------------------------------------
Operation : Safe Format Method 1
Processing...
Erasing FRP Partition...
Safeformat Universal...
Action Result :  Ok

Rebooting Device [Reboot To Normal]
Reboot Done!!

Elapsed Time : 00:00:48

Gsm-Ahmed · 09-25-2021, 14:06

OPPO A54 (CPH2239) Ultra Power Option

Code:

Searching for MTK Device...Found
 Port Identification :Flashmode BROM 
 FriendlyName :MediaTek USB Port_V1633 (COM21)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : BA8B1603091E6931116AC133EBAFFF25
 ERAM Size  : 0x0000000000038000 -224 KB
 IRAM Size  : 0x0000000100000000 -4 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000001000000 -16 MB
 eMMC USER  : 0x0000000E8F800000 -58.242 GB
 eMMC CID   : 90014A68433861503E030029D00B4877 - hC8aP>

Reading GPT-EMMC [0x00008000] 130 Items


-------------------------------------
Operation : Erase Userdata
Processing...
Erasing FRP Partition...
Formatting Userdata...
Action Result :  Ok

Rebooting Device [Reboot To Normal]
Reboot Done!!

Elapsed Time : 00:00:04

Gsm-Ahmed · 09-27-2021, 12:05

Starlight C Note Pro Fix Touch + Red Writing
Flash Done By Hydra Tool

Gsm-Ahmed · 09-27-2021, 12:06

Starlight C_Note_Pro Ultra Power Option

ZeroWipe FRP + Safeformat

Code:

Searching for MTK Device...Found
 Port Identification :Flashmode Preloader
 FriendlyName :MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_2000#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..
Handshaking...Ok

Identifying Hardware ID.....
Reading Device hardware info..
 hw code       : 0699MT6739 [6739]
 hw subcode    : 8A00
 hw version    : CB00
 sw version    : 0002
 Target config : 00
 SBC           : 00 (False)
 SLA           : 00 (False)
 DAA           : 00 (False)
 SWJTAG        : 00 (False)
 EPP           : 00 (False)
 CERT          : 00 (False)
 MEMREAD       : 00 (False)
 MEMWRITE      : 00 (False)
 CMD_C8        : 00 (False)
 FUSEID         : 00000000
 SECURE VERSION : FF 
 BL VERSION     : 03 

Preparing Download Agent..
 DA   : 6739.bin
 Agent: MTK_DOWNLOAD_AGENT -HYDRA
 Ver  : MTK_AllInOne_DA_v3.3001.2020-11-03.22:07_536568
 Init : Loader [1]
 Sending : Accepted

Identifying Protocol...
 Protocol : New
 Synchronization...SYNC
 Mode : preloader

Execute Secondary Loader
 Init : Loader [2]
 Executing : SYNC

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : 14F07F560C6E7AFB9CD99EEC803BC3AF
 ERAM Size  : 0x0000000000020000 -128 KB
 IRAM Size  : 0x00000000C0000000 -3 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000000400000 -4 MB
 eMMC USER  : 0x0000000747C00000 -29.121 GB
 eMMC CID   : 90014A484247346132A404931C0E53DD - HBG4a2

DA Speed : high-speed

Reading GPT-EMMC [0x00008000] 130 Items

Reading System Info
  Brand          : Starlight
  Vendor         : Starlight
  Model          : C_Note_Pro
  ID             : PPR1.180610.011
  SDK            : 28
  Release        : 9
  ABI            : armeabi-v7a
  CPU abilist    : armeabi-v7a,armeabi
  Locale         : en-US
  Description    : full_t939he_v2_av_hxgj_ac68d_sta_p-user 9 PPR1.180610.011 eng.autoft.20190410.191855 release-keys
  Device         : C_Note_Pro
  Display ID     : Starlight.C_Note_Pro.X.V3.04_20190410
  Security Patch : 2019-03-05
  Fingerprint    : Starlight/C_Note_Pro/C_Note_Pro:9/PPR1.180610.011/autoftp04101917:user/release-keys
  StorageType    : mtp
  Userdata State : Encrypted

Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
   -> Renaming Preloader....  preloader_t939he_v2_av_hxgj_ac68d_sta_p.bin
   Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0699_Starlight_C_Note_Pro_C_Note_Pro_9_PPR1.180610.011_autoftp04101917_092621103103\MT6739_Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x02D88000]1024 KB ->frp.bin...Ok
-nvdata[0x03688000]32 MB ->nvdata.bin...Ok
-protect1[0x07688000]8 MB ->protect1.bin...Ok
-protect2[0x07E88000]9.469 MB ->protect2.bin...Ok
-persist[0x09000000]48 MB ->persist.bin...Ok
-nvram[0x13700000]5 MB ->nvram.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0699_Starlight_C_Note_Pro_C_Note_Pro_9_PPR1.180610.011_autoftp04101917_092621103103
MTK Phone Loader is NOW RUNNING.

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : 14F07F560C6E7AFB9CD99EEC803BC3AF
 ERAM Size  : 0x0000000000020000 -128 KB
 IRAM Size  : 0x00000000C0000000 -3 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000000400000 -4 MB
 eMMC USER  : 0x0000000747C00000 -29.121 GB
 eMMC CID   : 90014A484247346132A404931C0E53DD - HBG4a2

Reading GPT-EMMC [0x00008000] 130 Items


Reading System Info
  Brand          : Starlight
  Vendor         : Starlight
  Model          : C_Note_Pro
  ID             : PPR1.180610.011
  SDK            : 28
  Release        : 9
  ABI            : armeabi-v7a
  CPU abilist    : armeabi-v7a,armeabi
  Locale         : en-US
  Description    : full_t939he_v2_av_hxgj_ac68d_sta_p-user 9 PPR1.180610.011 eng.autoft.20190410.191855 release-keys
  Device         : C_Note_Pro
  Display ID     : Starlight.C_Note_Pro.X.V3.04_20190410
  Security Patch : 2019-03-05
  Fingerprint    : Starlight/C_Note_Pro/C_Note_Pro:9/PPR1.180610.011/autoftp04101917:user/release-keys
  StorageType    : mtp
  Userdata State : Encrypted

-------------------------------------
Operation : Auto
Processing...
ZeroWipe FRP Partition...
Safeformat Universal...
Action Result :  Ok

Rebooting Device [Reboot To Normal]
Reboot Done!!

Elapsed Time : 00:00:27

ismailcnr · 09-27-2021, 13:03

REDMI NOTE 8 PRO FULL FLASH DONE

Reading System Info
Vendor : Xiaomi
ID : RP1A.200720.011
SDK : 30
Release : 11
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-GB
Description : begoniain-user 11 RP1A.200720.011 V12.5.3.0.RGGINXM release-keys
Miui Ver : V125
Mod_device : begoniain_in_global
Display ID : RP1A.200720.011
Security Patch : 2021-07-01
StorageType : mtp
Userdata State : Not Encrypted

Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
-> Renaming Preloader.... preloader_begoniain.bin
Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0813__092721172015\MT6785_Androi d_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x05888000]1024 KB ->frp.bin...Ok
-nvdata[0x08188000]64 MB ->nvdata.bin...Ok
-persist[0x0E188000]70.469 MB ->persist.bin...Ok
-protect1[0x12800000]8 MB ->protect1.bin...Ok
-protect2[0x13000000]8 MB ->protect2.bin...Ok
-nvram[0x17580000]64 MB ->nvram.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0813__092721172015
MTK Phone Loader is NOW RUNNING.

Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 77FCDBD93D6056AF7199384E26F1253B
ERAM Size : 0x0000000000080000 -512 KB
IRAM Size : 0x0000000180000000 -6 GB
UFS LU0 Size: 0x0000000000400000 -4 MB
UFS LU1 Size: 0x0000000000400000 -4 MB
UFS LU2 Size: 0x0000001DCB000000 -119.172 GB
UFS CID : *H9HQ16AECMMDAR
UFS UNIQID : 140126c51365000000000000

Reading GPT-UFS [0x00008000] 130 Items

Flashing Selected Partitions....
- preloader[preloader_begoniain.bin] 512 KB Skipped
- recovery[recovery.img] 64 MB Flash -> = Ok
- vbmeta[vbmeta.img] 8 MB Flash -> = Ok
- efuse[efuse.img] 512 KB Flash -> = Ok
- md1img[md1img.img] 150 MB Flash -> = Ok
- spmfw[spmfw.img] 1024 KB Flash -> = Ok
- audio_dsp[audio_dsp.img] 4 MB Flash -> = Ok
- scp1[scp.img] 6 MB Flash -> = Ok
- scp2[scp.img] 6 MB Flash -> = Ok
- sspm_1[sspm.img] 1024 KB Flash -> = Ok
- sspm_2[sspm.img] 1024 KB Flash -> = Ok
- cam_vpu1[cam_vpu1.img] 15 MB Flash -> = Ok
- cam_vpu2[cam_vpu2.img] 15 MB Flash -> = Ok
- cam_vpu3[cam_vpu3.img] 15 MB Flash -> = Ok
- gz1[gz.img] 32 MB Flash -> = Ok
- gz2[gz.img] 32 MB Flash -> = Ok
- lk[lk.img] 2 MB Flash -> = Ok
- lk2[lk.img] 2 MB Flash -> = Ok
- boot[boot.img] 64 MB Flash -> = Ok
- logo[logo.bin] 64 MB Flash -> = Ok
- dtbo[dtbo.img] 32 MB Flash -> = Ok
- tee1[tee.img] 5 MB Flash -> = Ok
- tee2[tee.img] 9.5 MB Flash -> = Ok
- vendor[vendor.img] 1.5 GB Flash -> = Ok
- system[system.img] 3.5 GB Flash -> = Ok
- cache[cache.img] 432 MB Flash -> = Ok
- gsort[gsort.img] 16 MB Flash -> = Ok
- oem_misc1[oem_misc1.img] 16 MB Flash -> = Ok
- exaid[exaid.img] 128 MB Flash -> = Ok
- cust[cust.img] 832 MB Flash -> = Ok
- userdata[userdata.img] 12 GB Flash -> = Ok
=====================================

Elapsed Time : 00:08:47

gunit1 · 09-27-2021, 19:03

Huawei Mediapad T5 AGS2-L09 FRP done .

Hydra Main Tool Ver 1.0.1 Build 61 -
Windows 10 (Version 10.0, Build 21996, 64-bit Edition)
Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz
Intel(R) HD Graphics
Ram Installed : 8 GB
Windows Access Right : Admin
Software Run As Admnistrator

******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 210300012902
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]

Searching Device By Fastboot
Device Found...

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Reading Device Information...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
hotainfo......
#hotainfo_len :
#C_version :
#D_version :
#PLMN :
#BoardID :
#DeviceName :
Build number : AGS2-L09 8.0.0.319(OCEC432)
Product Model : AGS2-L09
hwnff_ver : Ver2.3
key_version : huawei_key_v1
product : hi6250
system_update_state :
vendorcountry : hw/eu
soc_id : 0.5
ro_build_fingerprint : 0.5
ro_build_version_full : 0.5
ro_build_version_qcom : 0.5
psid.........
#SN : VQTBB18925151314
#IMEI1 : 869564035200364
#IMEI2 : 000000000000000

Security Info....
#Dongle_info : 0.5
#FB Lock State : UNLOCKED
#USER Lock State : LOCKED

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Huawei Fastboot Service...
Factory Reset Protection...
Removing....Ok

Elapsed Time : 00:00:02

gunit1 · 09-27-2021, 19:04

Huawei Mediapad T5 AGS2-L09 FRP done .

Hydra Main Tool Ver 1.0.1 Build 61 -
Windows 10 (Version 10.0, Build 21996, 64-bit Edition)
Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz
Intel(R) HD Graphics
Ram Installed : 8 GB
Windows Access Right : Admin
Software Run As Admnistrator

******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 210300012902
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]

Searching Device By Fastboot
Device Found...

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Reading Device Information...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
hotainfo......
#hotainfo_len :
#C_version :
#D_version :
#PLMN :
#BoardID :
#DeviceName :
Build number : AGS2-L09 8.0.0.319(OCEC432)
Product Model : AGS2-L09
hwnff_ver : Ver2.3
key_version : huawei_key_v1
product : hi6250
system_update_state :
vendorcountry : hw/eu
soc_id : 0.5
ro_build_fingerprint : 0.5
ro_build_version_full : 0.5
ro_build_version_qcom : 0.5
psid.........
#SN : VQTBB18925151314
#IMEI1 : 869564035200364
#IMEI2 : 000000000000000

Security Info....
#Dongle_info : 0.5
#FB Lock State : UNLOCKED
#USER Lock State : LOCKED

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Huawei Fastboot Service...
Factory Reset Protection...
Removing....Ok

Elapsed Time : 00:00:02

test point

Gsm-Ahmed · 09-30-2021, 14:14

Redmi Note 8 Pro (begonia) Ultra Power Option

Code:

Brand : XIAOMI Model : Redmi Note 8 Pro (begonia) Connection : Flash Mode

=====================================
How To Boot : Power off phone
 * BROM Mode : Press VOL + or Press VOL -+
 * Preloader Mode : Just Insert cable

Searching for MTK Device...Found
 Port Identification :Flashmode BROM 
 FriendlyName :MediaTek USB Port_V1633 (COM21)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..
Handshaking...Ok

Identifying Hardware ID.....
Reading Device hardware info..
 hw code       : 0813MT6785 [6785]
 hw subcode    : 8A00
 hw version    : CA00
 sw version    : 0000
 Target config : E7
 SBC           : 01 (True)
 SLA           : 02 (True)
 DAA           : 04 (True)
 SWJTAG        : 06 (True)
 EPP           : 00 (False)
 CERT          : 00 (False)
 MEMREAD       : 20 (True)
 MEMWRITE      : 40 (True)
 CMD_C8        : 80 (True)

Exploiting Device...
Exploit Sent..
Successfully Exploited...
Handshaking...Ok

C:\Hydra Tool\Backup\Preloader_dump\prel.tmp
Handshaking...

Identifying Hardware ID.....
Reading Device hardware info..
 hw code       : 0813MT6785 [6785]
 hw subcode    : 8A00
 hw version    : CA00
 sw version    : 0000
 Target config : 00
 SBC           : 00 (False)
 SLA           : 00 (False)
 DAA           : 00 (False)
 SWJTAG        : 00 (False)
 EPP           : 00 (False)
 CERT          : 00 (False)
 MEMREAD       : 00 (False)
 MEMWRITE      : 00 (False)
 CMD_C8        : 00 (False)

MEID : 5F421864E8048714FE392A82F79C8BEA
Stage 1..[Size:234968]
 Sending :  Please wait.. Accepted

Identifying Protocol...
 Protocol : New
 Synchronization...SYNC
 Preloader Initialization...
 Parsing prel.tmp
 Init : Accepted
 Executing : SYNC

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : 7D36670F8B2B9E30970127A654DFBBEC
 ERAM Size  : 0x0000000000080000 -512 KB
 IRAM Size  : 0x0000000180000000 -6 GB
 UFS LU0 Size: 0x0000000000400000 -4 MB
 UFS LU1 Size: 0x0000000000400000 -4 MB
 UFS LU2 Size: 0x0000001DCB000000 -119.172 GB
 UFS CID     : ÎKM2V8001CM-B707
 UFS UNIQID  : 00330062003200310065003300610035
 Executing : ACCEPTED...

Reading GPT-UFS [0x00008000] 130 Items

Reading System Info
  Vendor         : Xiaomi
  ID             : RP1A.200720.011
  SDK            : 30
  Release        : 11
  ABI            : arm64-v8a
  CPU abilist    : arm64-v8a,armeabi-v7a,armeabi
  Locale         : en-GB
  Description    : begoniain-user 11 RP1A.200720.011 V12.5.3.0.RGGINXM release-keys
  Miui Ver       : V125
  Mod_device     : begoniain_in_global
  Display ID     : RP1A.200720.011
  Security Patch : 2021-07-01
  StorageType    : mtp
  Userdata State : Not Encrypted

Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
   -> Renaming Preloader....  preloader_begoniain.bin
   Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0813__093021104102\MT6785_Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x05888000]1024 KB ->frp.bin...Ok
-nvdata[0x08188000]64 MB ->nvdata.bin...Ok
-persist[0x0E188000]70.469 MB ->persist.bin...Ok
-protect1[0x12800000]8 MB ->protect1.bin...Ok
-protect2[0x13000000]8 MB ->protect2.bin...Ok
-nvram[0x17580000]64 MB ->nvram.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0813__093021104102
MTK Phone Loader is NOW RUNNING.
=====================================

Elapsed Time : 00:00:39

Code:

=====================================
Searching for MTK Device...Found
 Port Identification :Flashmode BROM 
 FriendlyName :MediaTek USB Port_V1633 (COM21)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : 7D36670F8B2B9E30970127A654DFBBEC
 ERAM Size  : 0x0000000000080000 -512 KB
 IRAM Size  : 0x0000000180000000 -6 GB
 UFS LU0 Size: 0x0000000000400000 -4 MB
 UFS LU1 Size: 0x0000000000400000 -4 MB
 UFS LU2 Size: 0x0000001DCB000000 -119.172 GB
 UFS CID     : ÎKM2V8001CM-B707
 UFS UNIQID  : 00330062003200310065003300610035

Reading GPT-UFS [0x00008000] 130 Items


Reading System Info
  Vendor         : Xiaomi
  ID             : RP1A.200720.011
  SDK            : 30
  Release        : 11
  ABI            : arm64-v8a
  CPU abilist    : arm64-v8a,armeabi-v7a,armeabi
  Locale         : en-GB
  Description    : begoniain-user 11 RP1A.200720.011 V12.5.3.0.RGGINXM release-keys
  Miui Ver       : V125
  Mod_device     : begoniain_in_global
  Display ID     : RP1A.200720.011
  Security Patch : 2021-07-01
  StorageType    : mtp
  Userdata State : Not Encrypted

-------------------------------------
Operation : Auto
Processing...
ZeroWipe FRP Partition...
Safeformat Universal...
Action Result :  Ok

Rebooting Device [Reboot To Normal]
Reboot Done!!

Elapsed Time : 00:00:02

Gsm-Ahmed · 09-30-2021, 14:15

Oppo F1 Plus (X9009) Read Pattern Done By Hydra Tool

Gsm-Ahmed · 09-30-2021, 15:43

Samsung A10S (SM-A107F) U8 FRP Remove

Format Selected Partition : Formatting [persistent] Ok

Code:

Searching for MTK Device...Found
 Port Identification :Flashmode BROM 
 FriendlyName :MediaTek USB Port_V1633 (COM21)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : 753EA43DF97A9D6FFA0B176CA9522045
 ERAM Size  : 0x0000000000038000 -224 KB
 IRAM Size  : 0x0000000080000000 -2 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000001000000 -16 MB
 eMMC USER  : 0x0000000747C00000 -29.121 GB
 eMMC CID   : 150100515836334D4200A231BC47B713 - QX63MB

Reading GPT-EMMC [0x00008000] 46 Items

Reading System Info
  ID             : QP1A.190711.020
  SDK            : 29
  Release        : 10
  ABI            : armeabi-v7a
  CPU abilist    : armeabi-v7a,armeabi
  Locale         : en-GB
  Description    : a10sxx-user 10 QP1A.190711.020 A107FXXU8BUF1 release-keys
  Display ID     : QP1A.190711.020.A107FXXU8BUF1
  Security Patch : 2021-04-01
  StorageType    : mtp
  Userdata State : Not Encrypted

Format Selected Partition
Formatting [persistent] Ok!
=====================================

Elapsed Time : 00:00:03

Gsm-Ahmed · 10-02-2021, 13:06

OPPO A5S (CPH1909) Ultra Power Option

Code:

Brand : OPPO Model : A5s (CPH1909) Connection : Flash Mode

=====================================
How To Boot : Power off phone
 * BROM Mode : Press VOL + or Press VOL -+
 * Preloader Mode : Just Insert cable

Searching for MTK Device...Found
 Port Identification :Flashmode BROM 
 FriendlyName :MediaTek USB Port_V1633 (COM21)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..
Handshaking...Ok

Identifying Hardware ID.....
Reading Device hardware info..
 hw code       : 0766MT6765 [6765]
 hw subcode    : 8A00
 hw version    : CA00
 sw version    : 0000
 Target config : E5
 SBC           : 01 (True)
 SLA           : 00 (False)
 DAA           : 04 (True)
 SWJTAG        : 04 (True)
 EPP           : 00 (False)
 CERT          : 00 (False)
 MEMREAD       : 20 (True)
 MEMWRITE      : 40 (True)
 CMD_C8        : 80 (True)

Exploiting Device...
Exploit Sent..
Successfully Exploited...
Handshaking...Ok

C:\Hydra Tool\Backup\Preloader_dump\prel.tmp
Handshaking...

Identifying Hardware ID.....
Reading Device hardware info..
 hw code       : 0766MT6765 [6765]
 hw subcode    : 8A00
 hw version    : CA00
 sw version    : 0000
 Target config : 00
 SBC           : 00 (False)
 SLA           : 00 (False)
 DAA           : 00 (False)
 SWJTAG        : 00 (False)
 EPP           : 00 (False)
 CERT          : 00 (False)
 MEMREAD       : 00 (False)
 MEMWRITE      : 00 (False)
 CMD_C8        : 00 (False)

MEID : 5136E3C2B360382611E2201F25F74EB9
Stage 1..[Size:216440]
 Sending :  Please wait.. Accepted

Identifying Protocol...
 Protocol : New
 Synchronization...SYNC
 Preloader Initialization...
 Parsing prel.tmp
 Init : Accepted
 Executing : SYNC

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : EEEBFEC38EBAED10E79ED09E230A7BAC
 ERAM Size  : 0x0000000000038000 -224 KB
 IRAM Size  : 0x00000000C0000000 -3 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000000400000 -4 MB
 eMMC USER  : 0x0000000747C00000 -29.121 GB
 eMMC CID   : 150100474436424D420123DD9BD776F7 - GD6BMB
 Executing : ACCEPTED...

Reading GPT-EMMC [0x00008000] 130 Items

Reading System Info
  Vendor         : OPPO
  ID             : O11019
  SDK            : 27
  Release        : 8.1.0
  ABI            : arm64-v8a
  CPU abilist    : arm64-v8a,armeabi-v7a,armeabi
  Locale         : en-US
  Description    : full_oppo6765_18511-user 8.1.0 O11019 1616154336 release-keys
  Security Patch : 2021-04-05
  StorageType    : mtp
  Userdata State : Encrypted

Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
   -> Renaming Preloader....  preloader_oppo6765_18511.bin
   Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0766__100221093948\MT6765_Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x09E88000]1024 KB ->frp.bin...Ok
-nvdata[0x0BF88000]64 MB ->nvdata.bin...Ok
-protect1[0x11F88000]8 MB ->protect1.bin...Ok
-protect2[0x12788000]8.469 MB ->protect2.bin...Ok
-persist[0x13800000]48 MB ->persist.bin...Ok
-nvram[0x20000000]64 MB ->nvram.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0766__100221093948
MTK Phone Loader is NOW RUNNING.
=====================================

Elapsed Time : 00:00:43

Code:

Searching for MTK Device...Found
 Port Identification :Flashmode BROM 
 FriendlyName :MediaTek USB Port_V1633 (COM21)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..

Reading Device UniqueID, RAM and Flash Chip Info...
 UNIQUE ID  : EEEBFEC38EBAED10E79ED09E230A7BAC
 ERAM Size  : 0x0000000000038000 -224 KB
 IRAM Size  : 0x00000000C0000000 -3 GB
 eMMC BOOT1 : 0x0000000000400000 -4 MB
 eMMC BOOT2 : 0x0000000000400000 -4 MB
 eMMC RPMB  : 0x0000000000400000 -4 MB
 eMMC USER  : 0x0000000747C00000 -29.121 GB
 eMMC CID   : 150100474436424D420123DD9BD776F7 - GD6BMB

Reading GPT-EMMC [0x00008000] 130 Items


Reading System Info
  Vendor         : OPPO
  ID             : O11019
  SDK            : 27
  Release        : 8.1.0
  ABI            : arm64-v8a
  CPU abilist    : arm64-v8a,armeabi-v7a,armeabi
  Locale         : en-US
  Description    : full_oppo6765_18511-user 8.1.0 O11019 1616154336 release-keys
  Security Patch : 2021-04-05
  StorageType    : mtp
  Userdata State : Encrypted

-------------------------------------
Operation : Auto
Processing...
ZeroWipe FRP Partition...
Safeformat Universal...
Action Result :  Ok

Rebooting Device [Reboot To Normal]
Reboot Done!!

Elapsed Time : 00:00:02

Gsm-Ahmed · 10-03-2021, 11:11

IRIS IS2S Stuck On Logo Done By Ultra Power Option

(ZeroWipe FRP + Safeformat Universal)

Code:

=====================================
Searching for MTK Device...Found
 Port Identification :Flashmode Preloader
 FriendlyName :MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
 Device       :6&12e3c9ed&0&1
 SymbolicName :\??\USB#VID_0E8D&PID_2000#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Driver Ver   :01/22/2015,3.0.1504.0

Opened handle..


Reading System Info
  Brand          : IRIS
  Vendor         : IRIS
  Model          : IS2S
  ID             : NRD90M
  SDK            : 24
  Release        : 7.0
  ABI            : armeabi-v7a
  CPU abilist    : armeabi-v7a,armeabi
  Locale         : fr-FR
  Description    : full_len6737m_35_n-user 7.0 NRD90M 1516951110 test-keys
  Device         : IS2S
  Board          : IS2S
  Display ID     : IS2S_20180208V1.0
  Security Patch : 2018-01-05
  Platform       : mt6737m
  FRPPST         : /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
  Fingerprint    : IRIS/IS2S/IS2S:7.0/NRD90M/1516951110:user/release-keys
  StorageType    : mtp
  Userdata State : Not Encrypted

-------------------------------------
Operation : Auto
Processing...
ZeroWipe FRP Partition... [Ok]
Safeformat Universal...(tmp.bin)512 Bytes Ok
Action Result :  Ok

Rebooting Device [Reboot To Normal]
Reboot Done!!

Elapsed Time : 00:00:04

09-22-2021, 14:02	#2581 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,609	Xiaomi Redmi Note 9 (Merlin) erasing NVRAM and NVDATA done by Hydra Tool Xiaomi Redmi Note 9 (Merlin) erasing NVRAM and NVDATA done by Hydra Tool 1. Run Hydra Tool MTK Module. 2. Choose Brand and Module. 3. Tick "Auto Broom Exploit", "Enable UBL Loader" and "Enable Auto PrelDUMP" 4. Go to "Servic"--> "Tool" 5. Choose "NOn-Volatile Random Access Memory (NVRAM) 6. Choose "Erase NVRAM and NVDATA" from drop down menu. 7. Tick "Auto Reboot" 8. Connect cellphone to computer using USB Data Cable. 9. Wait until the operation is completed. Screen Short: BR Dipendra Pathak

09-22-2021, 14:10	#2582 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,609	Generic SC7731E SPD device's FRP succ3essfully removed by Hydra Tool Generic SC7731E SPD device's FRP succ3essfully removed by Hydra Tool 1. Run Hydra Tool SPD Module. 2. Choose Brand and Module. 3. Go to "Service"--> "Tool" 4. Choose "Factory Reset Protection" 5. Choose "FRP remove" from Flash mode 6. Tick "Auto Reboot" 7. Connect cellphone to computer using USB Data Cable. 8. Wait until the operation is completed. Screen Short: BR Dipendra Pathak

09-25-2021, 14:01	#2583 (permalink)
Gsm-Ahmed No Life Poster Join Date: Jan 2020 Location: Algeria Posts: 790 Member: 2944109 Status: Offline Thanks Meter: 621	Condor T2 SP9832A Remove FRP Condor T2 SP9832A Remove FRP

09-27-2021, 12:05	#2586 (permalink)
Gsm-Ahmed No Life Poster Join Date: Jan 2020 Location: Algeria Posts: 790 Member: 2944109 Status: Offline Thanks Meter: 621	Starlight C Note Pro Fix Touch + Red Writing Flash Done By Hydra Tool Starlight C Note Pro Fix Touch + Red Writing Flash Done By Hydra Tool

09-30-2021, 14:15	#2592 (permalink)
Gsm-Ahmed No Life Poster Join Date: Jan 2020 Location: Algeria Posts: 790 Member: 2944109 Status: Offline Thanks Meter: 621	Oppo F1 Plus (X9009) Read Pattern Done Oppo F1 Plus (X9009) Read Pattern Done By Hydra Tool

09-27-2021, 13:03	#2588 (permalink)
ismailcnr Freak Poster Join Date: Aug 2017 Location: Tamilnadu Posts: 120 Member: 2749644 Status: Online Sonork: 100.1678692 Thanks Meter: 47	REDMI NOTE 8 PRO FULL FLASH DONE Reading System Info Vendor : Xiaomi ID : RP1A.200720.011 SDK : 30 Release : 11 ABI : arm64-v8a CPU abilist : arm64-v8a,armeabi-v7a,armeabi Locale : en-GB Description : begoniain-user 11 RP1A.200720.011 V12.5.3.0.RGGINXM release-keys Miui Ver : V125 Mod_device : begoniain_in_global Display ID : RP1A.200720.011 Security Patch : 2021-07-01 StorageType : mtp Userdata State : Not Encrypted Autobackup Partitions -preloader[0x00000000]512 KB ->preloader.bin...Ok -> Renaming Preloader.... preloader_begoniain.bin Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0813__092721172015\MT6785_Androi d_scatter.txt -pgpt[0x00000000]32 KB ->pgpt.bin...Ok -frp[0x05888000]1024 KB ->frp.bin...Ok -nvdata[0x08188000]64 MB ->nvdata.bin...Ok -persist[0x0E188000]70.469 MB ->persist.bin...Ok -protect1[0x12800000]8 MB ->protect1.bin...Ok -protect2[0x13000000]8 MB ->protect2.bin...Ok -nvram[0x17580000]64 MB ->nvram.bin...Ok Done!!! C:\Hydra Tool\\Backup\Auto\0813__092721172015 MTK Phone Loader is NOW RUNNING. Reading Device UniqueID, RAM and Flash Chip Info... UNIQUE ID : 77FCDBD93D6056AF7199384E26F1253B ERAM Size : 0x0000000000080000 -512 KB IRAM Size : 0x0000000180000000 -6 GB UFS LU0 Size: 0x0000000000400000 -4 MB UFS LU1 Size: 0x0000000000400000 -4 MB UFS LU2 Size: 0x0000001DCB000000 -119.172 GB UFS CID : *H9HQ16AECMMDAR UFS UNIQID : 140126c51365000000000000 Reading GPT-UFS [0x00008000] 130 Items Flashing Selected Partitions.... - preloader[preloader_begoniain.bin] 512 KB Skipped - recovery[recovery.img] 64 MB Flash -> = Ok - vbmeta[vbmeta.img] 8 MB Flash -> = Ok - efuse[efuse.img] 512 KB Flash -> = Ok - md1img[md1img.img] 150 MB Flash -> = Ok - spmfw[spmfw.img] 1024 KB Flash -> = Ok - audio_dsp[audio_dsp.img] 4 MB Flash -> = Ok - scp1[scp.img] 6 MB Flash -> = Ok - scp2[scp.img] 6 MB Flash -> = Ok - sspm_1[sspm.img] 1024 KB Flash -> = Ok - sspm_2[sspm.img] 1024 KB Flash -> = Ok - cam_vpu1[cam_vpu1.img] 15 MB Flash -> = Ok - cam_vpu2[cam_vpu2.img] 15 MB Flash -> = Ok - cam_vpu3[cam_vpu3.img] 15 MB Flash -> = Ok - gz1[gz.img] 32 MB Flash -> = Ok - gz2[gz.img] 32 MB Flash -> = Ok - lk[lk.img] 2 MB Flash -> = Ok - lk2[lk.img] 2 MB Flash -> = Ok - boot[boot.img] 64 MB Flash -> = Ok - logo[logo.bin] 64 MB Flash -> = Ok - dtbo[dtbo.img] 32 MB Flash -> = Ok - tee1[tee.img] 5 MB Flash -> = Ok - tee2[tee.img] 9.5 MB Flash -> = Ok - vendor[vendor.img] 1.5 GB Flash -> = Ok - system[system.img] 3.5 GB Flash -> = Ok - cache[cache.img] 432 MB Flash -> = Ok - gsort[gsort.img] 16 MB Flash -> = Ok - oem_misc1[oem_misc1.img] 16 MB Flash -> = Ok - exaid[exaid.img] 128 MB Flash -> = Ok - cust[cust.img] 832 MB Flash -> = Ok - userdata[userdata.img] 12 GB Flash -> = Ok ===================================== Elapsed Time : 00:08:47

09-27-2021, 19:03	#2589 (permalink)
gunit1 No Life Poster Join Date: Oct 2013 Location: Cote Ivoire ABJ,tvlle, LBJ.23 Age: 38 Posts: 1,647 Member: 2041210 Status: Offline Thanks Meter: 541	Huawei Mediapad T5 AGS2-L09 FRP done . Hydra Main Tool Ver 1.0.1 Build 61 - Windows 10 (Version 10.0, Build 21996, 64-bit Edition) Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz Intel(R) HD Graphics Ram Installed : 8 GB Windows Access Right : Admin Software Run As Admnistrator ***** Dongle Info ***** Version : Hydra Tool v 1.2 Serial : 210300012902 Initialize : OKAY Status : Activated Life : 0 [0-0-0-0-0] Searching Device By Fastboot Device Found... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Reading Device Information... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - hotainfo...... #hotainfo_len : #C_version : #D_version : #PLMN : #BoardID : #DeviceName : Build number : AGS2-L09 8.0.0.319(OCEC432) Product Model : AGS2-L09 hwnff_ver : Ver2.3 key_version : huawei_key_v1 product : hi6250 system_update_state : vendorcountry : hw/eu soc_id : 0.5 ro_build_fingerprint : 0.5 ro_build_version_full : 0.5 ro_build_version_qcom : 0.5 psid......... #SN : VQTBB18925151314 #IMEI1 : 869564035200364 #IMEI2 : 000000000000000 Security Info.... #Dongle_info : 0.5 #FB Lock State : UNLOCKED #USER Lock State : LOCKED - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Huawei Fastboot Service... Factory Reset Protection... Removing....Ok Elapsed Time : 00:00:02

09-27-2021, 19:04	#2590 (permalink)
gunit1 No Life Poster Join Date: Oct 2013 Location: Cote Ivoire ABJ,tvlle, LBJ.23 Age: 38 Posts: 1,647 Member: 2041210 Status: Offline Thanks Meter: 541	Huawei Mediapad T5 AGS2-L09 FRP done . Hydra Main Tool Ver 1.0.1 Build 61 - Windows 10 (Version 10.0, Build 21996, 64-bit Edition) Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz Intel(R) HD Graphics Ram Installed : 8 GB Windows Access Right : Admin Software Run As Admnistrator ***** Dongle Info ***** Version : Hydra Tool v 1.2 Serial : 210300012902 Initialize : OKAY Status : Activated Life : 0 [0-0-0-0-0] Searching Device By Fastboot Device Found... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Reading Device Information... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - hotainfo...... #hotainfo_len : #C_version : #D_version : #PLMN : #BoardID : #DeviceName : Build number : AGS2-L09 8.0.0.319(OCEC432) Product Model : AGS2-L09 hwnff_ver : Ver2.3 key_version : huawei_key_v1 product : hi6250 system_update_state : vendorcountry : hw/eu soc_id : 0.5 ro_build_fingerprint : 0.5 ro_build_version_full : 0.5 ro_build_version_qcom : 0.5 psid......... #SN : VQTBB18925151314 #IMEI1 : 869564035200364 #IMEI2 : 000000000000000 Security Info.... #Dongle_info : 0.5 #FB Lock State : UNLOCKED #USER Lock State : LOCKED - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Huawei Fastboot Service... Factory Reset Protection... Removing....Ok Elapsed Time : 00:00:02 test point

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode