redmi 5 plus meg7 vince hard bricked [Answered]

[bananin]

hi, i was tryng to unnoficially unlock bootloader of a xiaomi redmi 5 plus vince
i used these files and this software (the software showed the phone was succesfully unlocked)
but now the phone is hard bricked, i managed to get the factory firmware for this device but the phone never boots after i flash it.
it was fully working before i tried the boot unlock process, and i managed to make it alive (only fastboot mode) with a redmi s2/y2 YSL firmware (Redmi_S2_m1803E6H\ysl_global_images_V10.3.1.0.OEF MIXM_20190425.0000.00_8.1_global) but the screen shows a distorted image
whenever i try to flash via fastboot or edl any redmi 5 plus vince fimrware the phone dies and shows qcom 9008 port.
is there a way to make the device boot again with a vince fimrware?

unlocker : https://drive.google.com/open?id=10lrQe9G-wznh7FqpLJxdiQyiw29VKGD-
unlock files: https://drive.google.com/open?id=1nsbpQ0sDL4BL_8n0sXIFyN02qoCyENuc

[pulian]

Did you solve this problem?

I have Redmi 5 plus same condition. I did backup partitions before flash unlockboot files but it didnt help for restoring

[Franky_36]

Originally Posted by bananin

hi, i was tryng to unnoficially unlock bootloader of a xiaomi redmi 5 plus vince
i used these files and this software (the software showed the phone was succesfully unlocked)
but now the phone is hard bricked, i managed to get the factory firmware for this device but the phone never boots after i flash it.
it was fully working before i tried the boot unlock process, and i managed to make it alive (only fastboot mode) with a redmi s2/y2 YSL firmware (Redmi_S2_m1803E6H\ysl_global_images_V10.3.1.0.OEF MIXM_20190425.0000.00_8.1_global) but the screen shows a distorted image
whenever i try to flash via fastboot or edl any redmi 5 plus vince fimrware the phone dies and shows qcom 9008 port.
is there a way to make the device boot again with a vince fimrware?

unlocker : https://drive.google.com/open?id=10lrQe9G-wznh7FqpLJxdiQyiw29VKGD-
unlock files: https://drive.google.com/open?id=1nsbpQ0sDL4BL_8n0sXIFyN02qoCyENuc

Good, the first thing you have to know if it is a global version, Indian version, Chinese version, etc., once you know which version is flash, the latest version of mui that has the model of xiaomi, after flash, do factory reset through the recovery, keep in mind that if it is true what you have put in the post you have flashed a firmware of the xiaomi S2 models, as you have put in the post, if what I have told you does not work, you will have to take and through isp pinout or emmc extraction repair the xiaomi, thanks a lot.

[pulian]

@Franky_36

I tried everythink even erase whole chip and writting all partitions. Phone always edl mode when it has vince firmware. I think there is a partition we missed.



*I wrote eng firmware indian too

[Hydra Tool]

Originally Posted by pulian

@Franky_36

I tried everythink even erase whole chip and writting all partitions. Phone always edl mode when it has vince firmware. I think there is a partition we missed.



*I wrote eng firmware indian too

Hello,

What's your device status when startup ?

Best Regards | Hydra Team

[pulian]

Phone is totally dead, qc9008 mode. But internal info is same that firmware I wrote.

after I wrote files unlock bootlaoder, Phone cant be detect with loader original from firmware model vince, just using auto loader or loader from firmware xioami y2/s2. I think partition emmc_appsboot.mbn has to modifify

[Hydra Tool]

Originally Posted by pulian

Phone is totally dead, qc9008 mode. But internal info is same that firmware I wrote.

after I wrote files unlock bootlaoder, Phone cant be detect with loader original from firmware model vince, just using auto loader or loader from firmware xioami y2/s2. I think partition emmc_appsboot.mbn has to modifify

Hello,

We have Read and Write Dump Function at Qualcomm Module,
You can Read Dump from working phone or find anywhere else, and Write to Device.

Best Regards | Hydra Team

[pulian]

Originally Posted by Hydra Tool

Hello,

We have Read and Write Dump Function at Qualcomm Module,
You can Read Dump from working phone or find anywhere else, and Write to Device.

Best Regards | Hydra Team

Yes, I did it when phone was working, I just skipped system cust and userdata partition, I have restored but same result... weird