all mediatek wipe data hang in logo [Answered]

[nadire]

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x3DB9F05A, 0x9CABF345, 0x7DEB06D9, 0x225269C4
Get Chip ID... [MT6761]
Get SOC ID... [A83F2A4BF0082DA2648FDB465A330562375C4791D0140CC2E0 B01170873BA96D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010043555441343205EBB1F45D68D1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CUTA42
EMMC_ID : 0x15010043555441343205EBB1F45D68D1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X657B
Product Name : X657B-OP
Product Device : Infinix-X657B
Product Board : Infinix-X657B
Board Platform : mt6761
Build ID : QP1A.190711.020
Build Date : Wed Apr 6 16:52:13 CST 2022
Display ID : X657B-H6117DFJ-QGo-OP-220406V422
Security Patch : 2022-04-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : DFJ-OP-220406V422
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X657%20(Infinix%20Smart%205)/FRP_BACKUP_(2024-3-27_14-53-40)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Creating default filesystems... [USERDATA: EXT4] ... [CACHE: EXT4] ... [METADATA: EXT4] ... [MD_UDC: EXT4] ... OK
Wipe data done!



Selected model: Infinix X657 (Infinix Smart 5)
Operation: Erase FRP And Wipe
Software version: 6.7 after hard reset hanf in logo all mediatek hang in logo

[professorjazz]

try to write the backup.................

[Z3X]

Hello. What other devices stuck logo after wipe?

[nadire]

all mtk devices like xiaomi tcl infinx all mtk execpt samsung then need always do hard reset by hand

[Z3X]

Thanks, we will check this.

[nadire]

thanks pls chech and slove it pls as soon as possible all mtk hang in logo except samsung and vivo

[Z3X]

We will fix this in update.

[professorjazz]

possible erasing and writing in the wrong address...thus it will result to logo

[Z3X]

Originally Posted by professorjazz

possible erasing and writing in the wrong address...thus it will result to logo

Erase userdata via wipe partitions button.

[Phoka]

Erasing userdata and wiping lartitions does not work, I ended up using old cm2mtk setup from 2018 and it worked. Pandora team kindly fix it because some people do not have alternative tools like some of us. Again fix Nokia G10 bug.

[professorjazz]

Originally Posted by Phoka

Erasing userdata and wiping lartitions does not work, I ended up using old cm2mtk setup from 2018 and it worked. Pandora team kindly fix it because some people do not have alternative tools like some of us. Again fix Nokia G10 bug.

same with my nokia ta-1369, damaged by pandora, and i fix in phoenix service tool...

[Phoka]

I use unlocktool for nokia and it works fine.