Functions / Phones adding requests. - Page 26 - GSM-Forum

ciom · 02-24-2022, 21:32

hello please need help for unlock network oppo cph2065 Reno 4 z 5G done in pandora or not please remply me have bulk order ?

sajjad akram · 02-25-2022, 09:54

Selected model: Samsung SM-A325F (Galaxy A32)
Operation: Remove KG
Software version: 2.12

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM20 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM20 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x341FDADA, 0x32551E81, 0x3380937F, 0x96C51903
Get Chip ID... [MT6768]
Get SOC ID... [C0848FF045EE29D98B2FCDD6145233E6493EF1F2A31DF8B1C0 2DAD177FC90319]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E47314A39533910163D2B45986F
Load EMI from phone... Skip
Load EMI config from database [DB VER: 203 DB DATE: 02-22-2022] OK [1]
Trying EMI [72ECA8F6, 4C76F2A3, 1A304479, 154C2947, 8CE8F9F2, 7161197D, F1ADA01B, 4ECF8C5A]
Init EXT RAM... error(2)

siang8788 · 02-25-2022, 11:30

please spoort flashing samsung mtk phone with tar firmware.

yosbel182us · 02-26-2022, 13:42

Oppo CPH2185 after repair imei phone only vibrant, please fix this bug

edisonsuen · 02-28-2022, 04:02

Australian single sim OPPO A16s network unlock error

Selected model: OPPO CPH2271 (Oppo A16s)
Operation: Unlock network
Software version: 2.12

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to BOX in BROM mode
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2099EF29, 0x86DBA578, 0x6332E5B1, 0x38919889
Get Chip ID... [MT6765]
Get SOC ID... [5136AE111891D50A02A8BA9D80D7CFDB912EAFD0D68AF138DE 711861CBFFC3A1]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E0310058F0398D1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x90014A68433861503E0310058F0398D1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Check A/B state... OK
Read product info... OK
Product Brand : alps
Product Manufacturer : alps
Product Model : oplus_mssi_64_cn
Product Name : sys_oplus_mssi_64_cn
Product Device : oplus_mssi_64_cn
Product Board : oppo6765
Board Platform : MT6765
Build ID : RP1A.200720.011
Build Date : Thu Aug 26 18:25:56 CST 2021
Display ID : RP1A.200720.011 release-keys
Security Patch : 2021-08-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1629972801817
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... error(1)

mrehan991 · 03-01-2022, 18:15

Tecno CG6j (Camon 17) Read Flash Info Failed ....

Code:

Selected model: Tecno CG6j (Camon 17)
Operation: Read Flash Info :confused: :confused:
Software version: 2.12

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to BOX in BROM mode
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM30 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xBC931853, 0x29B0FF30, 0xC8F8A6B8, 0x0A1B7834
Get Chip ID... [MT6768]
Get SOC ID... [CEBF71D090152F576C55CB3F17A8CC268294E3FE866F35CA4895950CC1155EA6]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010033563643414202B2E0DCFF28D7
Load EMI from phone... Skip
Load EMI config from database [DB VER: 203 DB DATE: 02-22-2022] OK [1]
Trying EMI [C41C94FB, 40457DA8, D8F5BD39, F83EEC01, AD4E4796, 4C76F2A3, 85DF9841, 154C2947, 1A304479, F1ADA01B, AF66D99A, 72ECA8F6]
Init EXT RAM... error(2)

Iftakhar Rajper · 03-06-2022, 06:37

Do some thing about Nokia,Not all Nokia tabs models work have ads in the Nokia tab

Iftakhar Rajper · 03-06-2022, 06:38

mreham,Disable Read EMI option.......

Iftakhar Rajper · 03-07-2022, 09:40

Waoo Rocking update keep it up,add latest nokia factory reset support....

egmustafa · 03-07-2022, 15:04

Redmi Note 11 Pro/Pro+ /Xiaomi 11i

sscs · 03-08-2022, 02:56

old 2.12 Supported phone models, update to 3.0 does not work

sscs · 03-08-2022, 03:12

ZTE M901C Q529T
LG G3

These models worked in version 2.11, but not after update to 3.0
The last is such a reminder, hope to repair as soon as possible

Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA...
Exception: Invalid pointer operation

adle18 · 03-08-2022, 09:17

Hello Pandora Box Dev Team, i need support for imei repair on mine realme x7 pro 5g // rmx2121 , it's already possible and supported?

nilpori · 03-08-2022, 14:07

oppo reno 6 pro repair sported plz

Melvin Castro19 · 03-08-2022, 14:36

Hola. la caja no me conecta los teléfonos con el autentificador solo USB será que salió mala de fabrica?

03-08-2022, 09:17	#388 (permalink)
adle18 Junior Member Join Date: Oct 2013 Posts: 8 Member: 2043898 Status: Offline Thanks Meter: 0	Hello Pandora Box Dev Team, i need support for imei repair on mine realme x7 pro 5g // rmx2121 , it's already possible and supported? Last edited by adle18; 03-08-2022 at 09:27.

03-08-2022, 14:07	#389 (permalink)
nilpori Freak Poster Join Date: Jul 2014 Location: kushtia.bangladesh Posts: 190 Member: 2219498 Status: Offline Sonork: 100.1669861 Thanks Meter: 69	oppo reno 6 pro repair sported plz oppo reno 6 pro repair sported plz

02-24-2022, 21:32	#376 (permalink)
ciom Freak Poster Join Date: Mar 2005 Posts: 215 Member: 128018 Status: Offline Thanks Meter: 17	hello please need help for unlock network oppo cph2065 Reno 4 z 5G done in pandora or not please remply me have bulk order ?

02-25-2022, 09:54	#377 (permalink)
sajjad akram Freak Poster Join Date: Apr 2016 Location: South Africa /Pakistan Age: 29 Posts: 482 Member: 2555393 Status: Offline Thanks Meter: 268	Selected model: Samsung SM-A325F (Galaxy A32) Operation: Remove KG Software version: 2.12 Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Connect phone to BOX in BROM/PRELOADER Mode Wait for device connecting... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0] Device found at COM20 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0707 Get HW & SW version from device... OK HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6768] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Force switch to BROM... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Wait for device... OK Read usbhost speed... HIGH Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0707 Get HW & SW version from device... OK HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6768] Get sec config... OK [000000E5] Active sec flags: [SBC DAA] Advanced Bypass Security... OK Disconnect virtual port... OK Connect Type-C to HUB... OK Wait for device connecting... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0] Device found at COM20 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0707 Get HW & SW version from device... OK HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6768] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Reopen port for libver2... OK Get ME ID... OK ME_ID = 0x341FDADA, 0x32551E81, 0x3380937F, 0x96C51903 Get Chip ID... [MT6768] Get SOC ID... [C0848FF045EE29D98B2FCDD6145233E6493EF1F2A31DF8B1C0 2DAD177FC90319] Get sec config... OK [000000E0] Load DownloadAgent... OK Search DA... OK [8] Send preloader... OK Start preloader... OK Check preloader answer... OK Send bootloader... OK Start bootloader... OK Wait for answer from bootloader... OK Send SYNC signal... OK Setup device enviroment... OK Setup device parametres... OK Receive DA SYNC signal... OK Set DA parametres... OK Get device connection agent... [BROM] Get device info... OK EMMC_ID: 0x13014E47314A39533910163D2B45986F Load EMI from phone... Skip Load EMI config from database [DB VER: 203 DB DATE: 02-22-2022] OK [1] Trying EMI [72ECA8F6, 4C76F2A3, 1A304479, 154C2947, 8CE8F9F2, 7161197D, F1ADA01B, 4ECF8C5A] Init EXT RAM... error(2)

02-25-2022, 11:30	#378 (permalink)
siang8788 No Life Poster Join Date: Dec 2005 Location: malaysia Age: 41 Posts: 680 Member: 205283 Status: Offline Thanks Meter: 80	please spoort flashing samsung mtk phone with tar firmware.

02-26-2022, 13:42	#379 (permalink)
yosbel182us No Life Poster Join Date: Jan 2014 Location: CUBA Age: 32 Posts: 546 Member: 2108610 Status: Offline Thanks Meter: 379	Oppo CPH2185 after repair imei phone only vibrant, please fix this bug

02-28-2022, 04:02	#380 (permalink)
edisonsuen Freak Poster Join Date: Mar 2008 Location: australia Posts: 389 Member: 721542 Status: Offline Thanks Meter: 56	Australian single sim OPPO A16s network unlock error Selected model: OPPO CPH2271 (Oppo A16s) Operation: Unlock network Software version: 2.12 Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Connect phone to BOX in BROM mode Wait for device... OK Read usbhost speed... HIGH Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0766 Get HW & SW version from device... OK HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6765] Get sec config... OK [000000E5] Active sec flags: [SBC DAA] Advanced Bypass Security... OK Disconnect virtual port... OK Connect Type-C to HUB... OK Wait for device connecting... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0] Device found at COM7 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0766 Get HW & SW version from device... OK HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6765] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Reopen port for libver2... OK Get ME ID... OK ME_ID = 0x2099EF29, 0x86DBA578, 0x6332E5B1, 0x38919889 Get Chip ID... [MT6765] Get SOC ID... [5136AE111891D50A02A8BA9D80D7CFDB912EAFD0D68AF138DE 711861CBFFC3A1] Get sec config... OK [000000E0] Load DownloadAgent... OK Search DA... OK [7] Send preloader... OK Start preloader... OK Check preloader answer... OK Send bootloader... OK Start bootloader... OK Wait for answer from bootloader... OK Send SYNC signal... OK Setup device enviroment... OK Setup device parametres... OK Receive DA SYNC signal... OK Set DA parametres... OK Get device connection agent... [BROM] Get device info... OK EMMC_ID: 0x90014A68433861503E0310058F0398D1 Load EMI from phone... OK Parse EMI config... OK Init EXT RAM... OK Send 2nd DA... OK Get device info... OK EMMC INFO: EMMC_ID : 0x90014A68433861503E0310058F0398D1 EMMC_BOOT1: 0x0000400000 (4.00Mb) EMMC_BOOT2: 0x0000400000 (4.00Mb) EMMC_RPMB : 0x0001000000 (16.00Mb) EMMC_USER : 0x0E8F800000 (58.24Gb) RAM INFO: INT_SRAM: 0x000003A000 (232.00Kb) EXT_RAM : 0x0100000000 (4.00Gb) Check USB status... USB_HIGH_SPEED Read partitions info from phone... OK Check A/B state... OK Read product info... OK Product Brand : alps Product Manufacturer : alps Product Model : oplus_mssi_64_cn Product Name : sys_oplus_mssi_64_cn Product Device : oplus_mssi_64_cn Product Board : oppo6765 Board Platform : MT6765 Build ID : RP1A.200720.011 Build Date : Thu Aug 26 18:25:56 CST 2021 Display ID : RP1A.200720.011 release-keys Security Patch : 2021-08-05 Version SDK : 30 Version Release : 11 Version Codename : REL Firmware Version : 1629972801817 Read security partition from phone... OK Read security files... OK Read security files... OK Read lock info... error(1)

03-06-2022, 06:37	#382 (permalink)
Iftakhar Rajper No Life Poster Join Date: Apr 2017 Location: GOLD SINDH Posts: 697 Member: 2705849 Status: Offline Thanks Meter: 664	Do some thing about Nokia,Not all Nokia tabs models work have ads in the Nokia tab

03-06-2022, 06:38	#383 (permalink)
Iftakhar Rajper No Life Poster Join Date: Apr 2017 Location: GOLD SINDH Posts: 697 Member: 2705849 Status: Offline Thanks Meter: 664	mreham,Disable Read EMI option.......

03-07-2022, 09:40	#384 (permalink)
Iftakhar Rajper No Life Poster Join Date: Apr 2017 Location: GOLD SINDH Posts: 697 Member: 2705849 Status: Offline Thanks Meter: 664	Waoo Rocking update keep it up,add latest nokia factory reset support....

03-07-2022, 15:04	#385 (permalink)
egmustafa Junior Member Join Date: May 2017 Location: Turkey Posts: 14 Member: 2716889 Status: Offline Thanks Meter: 1	Redmi Note 11 Pro/Pro+ /Xiaomi 11i

03-08-2022, 02:56	#386 (permalink)
sscs Junior Member Join Date: Feb 2017 Posts: 7 Member: 2688323 Status: Offline Sonork: 654321 Thanks Meter: 0	old 2.12 Supported phone models, update to 3.0 does not work

03-08-2022, 03:12	#387 (permalink)
sscs Junior Member Join Date: Feb 2017 Posts: 7 Member: 2688323 Status: Offline Sonork: 654321 Thanks Meter: 0	ZTE M901C Q529T LG G3 These models worked in version 2.11, but not after update to 3.0 The last is such a reminder, hope to repair as soon as possible Load EMI from phone... OK Init DRAM... OK Enable DRAM... OK Sync with DA... Exception: Invalid pointer operation

03-08-2022, 14:36	#390 (permalink)
Melvin Castro19 Junior Member Join Date: Jun 2018 Location: Honduras Posts: 9 Member: 2843104 Status: Offline Thanks Meter: 0	Hola. la caja no me conecta los teléfonos con el autentificador solo USB será que salió mala de fabrica?