Pandora PRO 5.4 Update. New device added

[abuiesa]

good update team any news about Qualcomm..............

[adi sunarno]

Originally Posted by BootYa

usb only box port, how to pc port ?

don't tick USE BOX USB PORT,and automatic move to pc port

[TALHAGSM]

need solution for new security c10,c20 after unlock phone stock in fast-boot mode...

[matengo]

When I restart my PC my Pandora recognize as if I have registered on new PC. How can I solve this because now is 4/5 pc. And what is going to happen when it reaches 5/5 I'm worried because I have just bought it last month

[socialmyth]

great update keep it up pandora team always the best kindly add qualcomm add diag enable option for new qcom cpu

[ernestico911]

please add blu Studio Mini 2023 ST1020T MT6761V/WBB and unlock bootloader for xiomis with EROFS like redmi 12C (earth) please.

[Samacy]

Where to buy this in Philippines, I checked the reseller list but no Philippines

[Z3X]

Originally Posted by Samacy

Where to buy this in Philippines, I checked the reseller list but no Philippines

Use worldwide in this case, like gsmserver.

[dj.adam]

Originally Posted by blang

Pandora PRO 5.4 Update. New devices added.

New devices added to list of supported:

- Xiaomi Ruby (Redmi Note 12 Pro/Plus) supported functions (Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)

Added support for Doogee devices:

- S41,S41 Pro
- S51
- S61,S61 Pro
- S89,S89 Pro
- S96 GT
- V11
- X97,X97 Pro
- X98, X98 Pro

List of supported function for listed Doogee devices (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)


Added support a lot of Dexp mediatek phones, list of supported functions (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)

Fixed:

- Xiaomi decrypt error
- some small bugs



If you still not have pandora contact with official z3x reseller and buy a license and get Pandora Online immediately.
If you wish a Standalone solution, contact with domestic official reseller and buy Pandora BOX.


DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

Telegram news: HERE

plz help....

Oppo A16K cph2349 flashing not work..


Selected model: OPPO CPH2077 (OPPO A12)
Operation: Flash (Download only)
Software version: 5.4

Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x4DD0B23E, 0xB5DB91C8, 0xA71637D9, 0x1FEC795F
Get Chip ID... [MT6765]
Get SOC ID... [1C46BF8647DC7D4481B02C7071A0F526DF6E188CFDC34A4269 5A4AFAC162662A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445836384D42091E75DCCC591B
Load EMI config from preloader... OK
Init EXT RAM... error(6)

pandora 1.jpg



i try wipe partitions and work...

Selected model: OPPO CPH2077 (OPPO A12)
Operation: Wipe Partitions
Software version: 5.4
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x4DD0B23E, 0xB5DB91C8, 0xA71637D9, 0x1FEC795F
Get Chip ID... [MT6765]
Get SOC ID... [1C46BF8647DC7D4481B02C7071A0F526DF6E188CFDC34A4269 5A4AFAC162662A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445836384D42091E75DCCC591B
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DX68MB
EMMC_ID : 0x150100445836384D42091E75DCCC591B
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x00C0000000 (3,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand: alps
Product Manufacturer: alps
Product Model: oppo6765
Product Name: vnd_oppo6765
Product Device: oppo6765
Product Board: oppo6765
Board Platform: MT6765
Build ID: RP1A.200720.011
Build Date: Tue May 17 22:42:13 CST 2022
Display ID: RP1A.200720.011 release-keys
Security Patch: 2022-05-05
Version SDK: 30
Version Release: 11
Version Codename: REL
Firmware Version: 1652797328866
Userdata FS Type: F2FS
Format "frp" partition... OK
Format Partitions done!


need the solution

[justinsaccy]

Pliz can you add qualcomm devices on your next update

[ahmad.rajpot]

After new update blue screen and pc restart

[muddssar]

CPU QUALCOMM devices must add new update pandora box team

[kundicom]

Hello team please add mtk New security 1-5-2023

PL mode

[kundicom]

Hello team please add mtk New security 1-5-2023

PL mode

[cellcarcol]

- add change partition A/B, and B/A. state (SET boot Slot) in SPD NOKIA(unisoc)

- fix read backup RF in cellular mtk like a03s, a10s, etc.