GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Pandora’s box (https://forum.gsmhosting.com/vbb/f1110/)
-   -   Pandora PRO 8.5 Released. New Samsung devices added (https://forum.gsmhosting.com/vbb/f1110/pandora-pro-8-5-released-new-samsung-devices-added-3378046/)

Z3X 03-25-2025 09:47
Pandora PRO 8.5 Released. New Samsung devices added
 
Pandora PRO 8.5 Released. New Samsung devices added


Added support Samsung Mediatek phones (Preloader mode) *(TEST)* :

SM-A155F, SM-A155M
SM-A156B, SM-A156E, SM-A156M, SM-A156U, SM-A156U1, SM-A156W
SM-A165M, SM-A165N, SM-A1666P, SM-A245M
SM-E066B, SM-E156B, SM-G556B
SM-M156B, SM-S156V
SM-X820, SM-X826B, SM-X920, SM-X926B


Fixes:

- Fixed "Could not parse response. (Error: JR0)"


Download link: https://mega.nz/file/TLghiDiQ#mrpnYl...UzCKmd-W_v-wcY



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

https://z3x-team.com/wp-content/uplo...egrambaner.png

san.michel 03-25-2025 13:48
Quote:
Originally Posted by Z3X (Post 15102273)
Pandora PRO 8.5 Released. New Samsung devices added

Added support Samsung Mediatek phones (Preloader mode) *(TEST)* :

SM-A155F, SM-A155M
SM-A156B, SM-A156E, SM-A156M, SM-A156U, SM-A156U1, SM-A156W
SM-A165M, SM-A165N, SM-A1666P, SM-A245M
SM-E066B, SM-E156B, SM-G556B
SM-M156B, SM-S156V
SM-X820, SM-X826B, SM-X920, SM-X926B

Fixes:

- Fixed "Could not parse response. (Error: JR0)"

Pandora Box 8.5. How to use the preloader uin Samsung??? Do not show the Preloader Option for new Samsung A15, M15,

Like Show In Redmi 13c :confused:

Z3X 03-25-2025 14:51
Quote:
Originally Posted by san.michel (Post 15102453)
Pandora Box 8.5. How to use the preloader uin Samsung??? Do not show the Preloader Option for new Samsung A15, M15,

Like Show In Redmi 13c :confused:
Thats mean that phone supported in brom only.

san.michel 03-25-2025 18:51
Quote:
Originally Posted by Z3X (Post 15102470)
Thats mean that phone supported in brom only.

Code:
Selected model: Samsung SM-M156B (Galaxy M15 5G)
Operation: Erase FRP
Software version: 8.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1209
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6835]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1209
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6835]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x13165916, 0x7B029FF1, 0x4D0AD079, 0x261FEF75
Get Chip ID... [MT1209]
Get SOC ID... [9000B3ED13180E85DAFB24B0F896743671E569C8E91871A7A05844273C833F46]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM5L9001DA-B424 ()
Send 2nd DA... OK
DA2 auth:  disabled
Get device info... OK
UFS INFO:
  UFS_CID  : KM5L9001DA-B424
  UFS_FWVER :
  BLOCK_SIZE: 0x0000001000 (4,00Kb)
  UFS_LU0  : 0x0000400000 (4,00Mb)
  UFS_LU1  : 0x0000400000 (4,00Mb)
  UFS_LU2  : 0x1DCB000000 (119,17Gb)
Read partitions info from phone... error(1)
It does not work BROM mode and tespoint. It does not work M15, A15. Any idea my friend???

leods 03-25-2025 19:34
Quote:
Originally Posted by san.michel (Post 15102514)
Code:
Selected model: Samsung SM-M156B (Galaxy M15 5G)
Operation: Erase FRP
Software version: 8.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1209
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6835]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1209
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6835]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x13165916, 0x7B029FF1, 0x4D0AD079, 0x261FEF75
Get Chip ID... [MT1209]
Get SOC ID... [9000B3ED13180E85DAFB24B0F896743671E569C8E91871A7A05844273C833F46]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM5L9001DA-B424 ()
Send 2nd DA... OK
DA2 auth:  disabled
Get device info... OK
UFS INFO:
  UFS_CID  : KM5L9001DA-B424
  UFS_FWVER :
  BLOCK_SIZE: 0x0000001000 (4,00Kb)
  UFS_LU0  : 0x0000400000 (4,00Mb)
  UFS_LU1  : 0x0000400000 (4,00Mb)
  UFS_LU2  : 0x1DCB000000 (119,17Gb)
Read partitions info from phone... error(1)
It does not work BROM mode and tespoint. It does not work M15, A15. Any idea my friend???
A245m same problem flash price

Malik Shani G 03-25-2025 20:30
Good update z3x team...

Sir, what is the way to download Infinix and Tecno flash files in Z3X shell? It takes a lot of time in the box

leods 03-25-2025 20:37
Quote:
Originally Posted by san.michel (Post 15102514)
Code:
Selected model: Samsung SM-M156B (Galaxy M15 5G)
Operation: Erase FRP
Software version: 8.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1209
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6835]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1209
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6835]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x13165916, 0x7B029FF1, 0x4D0AD079, 0x261FEF75
Get Chip ID... [MT1209]
Get SOC ID... [9000B3ED13180E85DAFB24B0F896743671E569C8E91871A7A05844273C833F46]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM5L9001DA-B424 ()
Send 2nd DA... OK
DA2 auth:  disabled
Get device info... OK
UFS INFO:
  UFS_CID  : KM5L9001DA-B424
  UFS_FWVER :
  BLOCK_SIZE: 0x0000001000 (4,00Kb)
  UFS_LU0  : 0x0000400000 (4,00Mb)
  UFS_LU1  : 0x0000400000 (4,00Mb)
  UFS_LU2  : 0x1DCB000000 (119,17Gb)
Read partitions info from phone... error(1)
It does not work BROM mode and tespoint. It does not work M15, A15. Any idea my friend???
A245m same problem flash price

jhon32272 03-27-2025 13:32
Selected model: Huawei NEN-L22 (Huawei Nova 8i)
Operation: Reset Chip Damage
Software version: 8.5
Work ID: 66714886

Waiting for device... OK
Device found at COM35
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 624933376
Sahara ver: 2
OEM PK HASH: B25DECD85D217F5D9B53DC3C42EF7846DCEF59DD3E0AF4D126 06199F5099FF23D73C3AFFBE5EFBF421A81A197E41FDF5
CPU: SM6115 (Snapdragon 662)
Vendor: Huawei
MSM HW ID: 0014D0E10015006D
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: 36B5BB64E60E7C1999698A897B9F17DA1EE6ACF0
Loader PK hash: B25DECD85D217F5D9B53DC3C42EF7846DCEF59DD3E0AF4D126 06199F5099FF23D73C3AFFBE5EFBF421A81A197E41FDF5
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: KM2V8001CM-B707
Page size: 1000
Block size: 1000
Partition count: 6
LU0 size: 0x1DAE800000 (118,73Gb)
LU1 size: 0x0000800000 (8,00Mb)
LU2 size: 0x0000800000 (8,00Mb)
LU3 size: 0x0000800000 (8,00Mb)
LU4 size: 0x0019000000 (400,00Mb)
LU5 size: 0x0001800000 (24,00Mb)
Read partitions info from phone...
Exception: Access violation at address 01E29A29 in module PandoraTool.exe (offset 1AA9A29). Read of address 00000010

abo3mr 03-27-2025 23:07
1 Attachment(s)
error A155f

https://forum.gsmhosting.com/vbb/att...1&d=1743113261

sadewophone 04-02-2025 11:34
SAMSUNG S25 FRP NOT LOAD PARTITION

Selected model: Samsung SM-S936B (Galaxy S25 Plus)
Operation: Read Flash Info
Software version: 8.5
BIT 1 or less is supported by EDL loader

Waiting for device... OK
Device found at COM6
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1936847070
Sahara ver: 3
OEM PK HASH: 24E99697C1CDDBC78A0002049EDB0C97ABC607E84B552EA161 26BC7AF4283E7A462EBDF0B34B6B181137A2E26A6037D6
CPU: SM8750-AB (Snapdragon 8 Gen Elite 5G)
Vendor: Samsung
MSM HW ID: 0028C0E100200000
Prepare loader file... OK
Loader hash: B74E8AC2C994BBB786C2F728F09199CE7ADC54F6
Loader PK hash: 24E99697C1CDDBC78A0002049EDB0C97ABC607E84B552EA161 26BC7AF4283E7A462EBDF0B34B6B181137A2E26A6037D6
Loader version: 7.0
Sending loader... OK
FireHose initialization... error(2.1)

sadewophone 04-02-2025 11:42
S931b
 
SAMSUNG S25 S931B REMOVE FRP NOT LOAD PARTITION

Selected model: Samsung SM-S931B (Galaxy S25)
Operation: Erase FRP
Software version: 8.5
BIT 1 or less is supported by EDL loader

Waiting for device... OK
Device found at COM6
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1936847070
Sahara ver: 3
OEM PK HASH: 24E99697C1CDDBC78A0002049EDB0C97ABC607E84B552EA161 26BC7AF4283E7A462EBDF0B34B6B181137A2E26A6037D6
CPU: SM8750-AB (Snapdragon 8 Gen Elite 5G)
Vendor: Samsung
MSM HW ID: 0028C0E100200000
Prepare loader file... OK
Loader hash: B74E8AC2C994BBB786C2F728F09199CE7ADC54F6
Loader PK hash: 24E99697C1CDDBC78A0002049EDB0C97ABC607E84B552EA161 26BC7AF4283E7A462EBDF0B34B6B181137A2E26A6037D6
Loader version: 7.0
Sending loader... OK
FireHose initialization... error(2.1)

Nasri Rama 04-02-2025 11:52
EZ1 Phone.
 
Product Brand : Sun_King
Product Manufacturer : Sun_King
Product Model : EZ 1
Product Name : EZ_1
Product Device : EZ_1
Product Board : EZ_1
Board Platform : sp9863a
Build ID : TP1A.220624.014
Build Date : Thu Feb 27 16:17:59 CST 2025
Display ID : TP1A.220624.014 release-keys
Security Patch : 2024-11-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 1740484902
Userdata FS Type : F2FS


This is EZ1 Phone, has MDM Lock (NUOVO APP) and i can access ADB without problem but removing App via ADB AppControl not possible and within ADB AppControl that NUOVO App showing it has 0 mb.
Any idea on how to uninstall this App
NB; Unable to unlock Bootloader this build version because it is Android 14

Z3X 04-02-2025 16:11
Quote:
Originally Posted by sadewophone (Post 15105358)
SAMSUNG S25 S931B REMOVE FRP NOT LOAD PARTITION

Selected model: Samsung SM-S931B (Galaxy S25)
Operation: Erase FRP
Software version: 8.5
BIT 1 or less is supported by EDL loader

Waiting for device... OK
Device found at COM6
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1936847070
Sahara ver: 3
OEM PK HASH: 24E99697C1CDDBC78A0002049EDB0C97ABC607E84B552EA161 26BC7AF4283E7A462EBDF0B34B6B181137A2E26A6037D6
CPU: SM8750-AB (Snapdragon 8 Gen Elite 5G)
Vendor: Samsung
MSM HW ID: 0028C0E100200000
Prepare loader file... OK
Loader hash: B74E8AC2C994BBB786C2F728F09199CE7ADC54F6
Loader PK hash: 24E99697C1CDDBC78A0002049EDB0C97ABC607E84B552EA161 26BC7AF4283E7A462EBDF0B34B6B181137A2E26A6037D6
Loader version: 7.0
Sending loader... OK
FireHose initialization... error(2.1)
S25 not supported atm.

chezzter ash 04-04-2025 06:37
hope you make decide the user of box to update or not like this i have 8.5 but i open need to update to 8.6 but its slow hope make user box decide update or not


All times are GMT +1. The time now is 15:15.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.18268 seconds with 7 queries

SEO by vBSEO