GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Pandora’s box

Reply
 
LinkBack Thread Tools Display Modes
Old 07-20-2021, 14:54   #46 (permalink)
Crazy Poster
 
Join Date: Mar 2016
Age: 29
Posts: 50
Member: 2544984
Status: Offline
Sonork: Salatiel net
Thanks Meter: 10

Selected model: TMB 5007Z (Revvl 4)
Operation: Unlock network
Software version: 1.6

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM37 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x50ACBA38, 0x87FF9E47, 0xB38CF83E, 0xB4EE72EC
Get Chip ID... [MT6761]
Get SOC ID... [D7CE7CE4806DFDB36EDD76BA489D02318A2B27136ED931C4E1 C4D8362D981AFD]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [30]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1501003458364B4D42030703DC8CA781
Load EMI config from database [DB VER: 47 DB DATE: 04-02-2021] OK [1]
Trying EMI [44724C4B, 7CB86554, 9C47C7D7, C26ECB0F, CCFE52E9, 2E865ED1, 4C76F2A3]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x1501003458364B4D42030703DC8CA781
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x0000039000 (228.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read security partition from phone... OK
Read security files... OK
Read lock info... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
Report Post
  Reply With Quote
Old 07-21-2021, 18:11   #47 (permalink)
Junior Member
 
Join Date: Dec 2010
Posts: 6
Member: 1475689
Status: Offline
Thanks Meter: 1
Selected model: Nokia TA-1221 (Nokia 2V)
Operation: Unlock network
Software version: 2.2

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [000000E3]
Active sec flags: [SBC SLA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM241 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xA19B5C7F, 0xE872A725, 0x93344411, 0x8799C993
Get Chip ID... [MT6761]
Get SOC ID... [BBE10A7BFE2C4075C509CB3355A4BB794FC9C59EA7A6A70E16 7E66EAF04624BB]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [24]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x700100474D41474441700570004E27D5
Load EMI config from database [DB VER: 164 DB DATE: 07-17-2021] OK [1]
Trying EMI [1BB1F176, EB371E79, A29F3633, 92392267, 9C47C7D7, 0F6B3A76, A58FA23E, 4CA98027, C26ECB0F]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x700100474D41474441700570004E27D5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A6800000 (14.60Gb)
RAM INFO:
INT_SRAM: 0x0000039000 (228.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
  Reply With Quote
Old 07-26-2021, 14:30   #48 (permalink)
No Life Poster
 
-=MR_Gsm=-'s Avatar
 
Join Date: Apr 2008
Location: -=EuropE=-GsmhostinG-=EGYPT=-
Posts: 1,161
Member: 762055
Status: Online
Sonork: -=664053=-
Thanks Meter: 748
Donate money to this user
-=Samsung SM-A125F (Galaxy A12) Operation: Read PTT =-[SUCCESS REPORT]

( Read Flash ) ( Dumping Partitions ) With testpoint connected done!






Quote:
Selected model: Samsung SM-A125F (Galaxy A12)
Operation: Read PTT
Software version: 2.2

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x793BBAAD, 0x02F9F05C, 0xA367EE6B, 0x32AAEBAC
Get Chip ID... [MT6765]
Get SOC ID... [D99C976DC0FD8EBF77CB9FD2BAAED2571D4B24EAF971735E38 0868A75897BB95]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010044563644414200B027D4F0482B
Load EMI config from database [DB VER: 164 DB DATE: 07-17-2021] OK [1]
Trying EMI [667E0B28, 4C76F2A3, 1A304479, 72ECA8F6, 154C2947, 703B5CDE, AF66D99A, 429F5526, 4ECF8C5A, F1ADA01B]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x15010044563644414200B027D4F0482B
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read partition "preloader"... OK
Read partition "pgpt"... OK
Read partition "efs"... OK
Read partition "sec_efs"... OK
Read partition "steady"... OK
Read partition "nvram"... OK
Read partition "spmfw"... OK
Read partition "scp1"... OK
Read partition "sspm_1"... OK
Read partition "uh"... OK
Read partition "tee1"... OK
Read partition "tzar"... OK
Read partition "gz1"... OK
Read partition "lk"... OK
Read partition "dtbo"... OK
Read partition "vbmeta"... OK
Read partition "btd"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "bota"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "misc"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "metadata"... OK
Read partition "keyrefuge"... OK
Read partition "keydata"... OK
Read partition "md_udc"... OK
Read partition "persistent"... OK
Read partition "proinfo"... OK
Read partition "md1img"... OK
Read partition "param"... OK
Read partition "up_param"... OK
Read partition "boot"... OK
Read partition "recovery"... OK
Read partition "vbmeta_samsung"... OK
Read partition "vbmeta_vendor"... OK
Read partition "efuse"... OK
Read partition "reserved"... OK
Read partition "sec1"... OK
Read partition "super"... OK
Read partition "prism"... OK
Read partition "optics"... OK
Read partition "cache"... OK
Read partition "omr"... OK
Read partition "spu"... OK
Read partition "userdata"... OK
Read partition "sgpt"... OK
Dumping Partitions done!

BR,
-=MR_Gsm=-
  Reply With Quote
Old 07-29-2021, 16:11   #49 (permalink)
No Life Poster
 
-=MR_Gsm=-'s Avatar
 
Join Date: Apr 2008
Location: -=EuropE=-GsmhostinG-=EGYPT=-
Posts: 1,161
Member: 762055
Status: Online
Sonork: -=664053=-
Thanks Meter: 748
Donate money to this user
-=Xiaomi M2003J15SG (Redmi Note 9) Operation: Flash (Upgrade)=-[SUCCESS REPORT]


Quote:
Selected model: Xiaomi M2003J15SG (Redmi Note 9)
Operation: Flash (Upgrade)
Software version: 2.3

Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF37F8DE0, 0x296AECA4, 0xCF4E97B1, 0x40F29132
Get Chip ID... [MT6768]
Get SOC ID... [13820CB0AF2A3193A67BE176146E4273F24671DDCDEBED6B84 DD919994350F43]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [25]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E47314A395339100F89E18628CB
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x13014E47314A395339100F89E18628CB
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Get scatter info... OK
Check USB status... USB_HIGH_SPEED
Prepare list for upgrade... OK
Check upgrade list... OK
Prepare format list... OK
Prepare final partition list... OK
Read partition "preloader"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "persist"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Verify checksum... OK
Format EMMC_USER partition( 0x00008000..0x0A4A1FFF )... OK
Format EMMC_USER partition( 0x134A2000..0x164A1FFF )... OK
Format EMMC_USER partition( 0x17800000..0x181FFFFF )... OK
Format EMMC_USER partition( 0x18500000..0x26C7FFFFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Check partition table layout changed... OK
Generate mirror partition table... OK
Download mirror partition table... OK
Read major partition table... OK
Check major partition table layout changed... OK
Generate major partition table... OK
Download major partition table... OK
Download "preloader"... OK
Download "recovery"... OK
Download "vbmeta"... OK
Download "vbmeta_system"... OK
Download "vbmeta_vendor"... OK
Download "efuse"... OK
Download "logo"... OK
Download "md1img"... OK
Download "spmfw"... OK
Download "scp1"... OK
Download "scp2"... OK
Download "sspm_1"... OK
Download "sspm_2"... OK
Download "gz1"... OK
Download "gz2"... OK
Download "lk"... OK
Download "lk2"... OK
Download "boot"... OK
Download "dtbo"... OK
Download "tee1"... OK
Download "tee2"... OK
Download "cust"... OK
Download "devinfo"... OK
Download "super"... OK
Download "cache"... OK
Write file "nvcfg.bin"... OK
Write file "nvdata.bin"... OK
Write file "persist.bin"... OK
Write file "protect1.bin"... OK
Write file "protect2.bin"... OK
Write file "proinfo.bin"... OK
Write file "nvram.bin"... OK
Flashing done!

BR,
-=MR_Gsm=-
  Reply With Quote
Old 07-29-2021, 18:20   #50 (permalink)
Junior Member
 
Join Date: Nov 2017
Posts: 4
Member: 2776035
Status: Offline
Thanks Meter: 0
a502dl desbloqueado listo

Selected model: TCL A502DL (TCL LX)
Operation: Unlock network
Software version: 2.3

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM0 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF9E65CF7, 0xDABC0138, 0xE0C16049, 0xE1AE7910
Get Chip ID... [MT6739]
Get SOC ID... [497956A7D459C13F899311C906C960AE2816514D2D327A42BE 8103B162385DEF]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [0]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514536334D42033219ACA9167B
Load EMI config from database [DB VER: 164 DB DATE: 07-17-2021] OK [3]
Trying EMI [A04CDABF, 0BFBC345, 8FABA264]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x150100514536334D42033219ACA9167B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
  Reply With Quote
Old 07-30-2021, 18:52   #51 (permalink)
Product Supporter
 
.:Abdul-Basit:.'s Avatar
 
Join Date: Feb 2012
Location: KB GSM STORE
Posts: 1,144
Member: 1727711
Status: Offline
Sonork: 100.1590443
Thanks Meter: 1,329
TCL A502DL Network Unlock Done

TCL A502DL Network Unlock Done

Code:
Selected model: TCL A502DL (TCL LX)
Operation: Unlock network
Software version: 2.3

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM26 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xCB57DD5F, 0x01B0300F, 0x43ADBD46, 0xFE6988D2
Get Chip ID... [MT6739]
Get SOC ID... [8FB27F672C3576B8341617B94E811CD67439EA69B21C485215A236E07761DFDA]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [0]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514536334D4203485FAA031609
Load EMI config from database [DB VER: 164 DB DATE: 07-17-2021] OK [3]
Trying EMI [A04CDABF, 0BFBC345, 8FABA264]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_ID   : 0x150100514536334D4203485FAA031609
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0000400000 (4.00Mb)
   EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
   INT_SRAM: 0x0000020000 (128.00Kb)
   EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!



BR
  Reply With Quote
The Following User Says Thank You to .:Abdul-Basit:. For This Useful Post:
Old 07-30-2021, 21:09   #52 (permalink)
Insane Poster
 
Join Date: Jan 2013
Location: NAIROBI KITENGELA
Posts: 90
Member: 1865210
Status: Offline
Thanks Meter: 2
How can i reset kg lock status of Samsung A107f, please help if anyone have an idea
  Reply With Quote
Old 08-25-2021, 16:40   #53 (permalink)
Junior Member
 
Join Date: Aug 2021
Location: Pakistan
Posts: 18
Member: 2993836
Status: Offline
Thanks Meter: 0
Thumbs up Xiaomi Redmi 9A MI Account Remove Successfully! Pandora Box

Xiaomi Redmi 9A
MI Account Removed
Just One Click


Log:
Code:
Selected model: Xiaomi M2006C3LG (Redmi 9A)
Operation: Wipe Partitions
Software version: 2.3

Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xAEBE887A, 0xD6E615B2, 0xADBBF255, 0x059E8F3D
Get Chip ID... [MT6765]
Get SOC ID... [ED535D5190162BD9C16D5890636FED0F07FF863A8342DBA7F5DC5811BB67A4DD]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x45010044413430333201D1DD6D134733
Load EMI config from database [DB VER: 164 DB DATE: 07-17-2021] OK [1]
Trying EMI [46F6F1CA, 22BA5289, 92392267, EB371E79, C3498624, 7770139F, C0129602, E6CB89A3, CB03FF37, 11593C4B, 33A1CDBE, 7805E65B, DB7E1DC4, E055C125, 6526FBD5]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_ID   : 0x45010044413430333201D1DD6D134733
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Format "persist" partition... OK
Format Partitions done!
BR,
GSMCity
  Reply With Quote
Old 08-25-2021, 16:52   #54 (permalink)
Z3X
Product Supporter
 
Join Date: Feb 2008
Posts: 3,783
Member: 706257
Status: Offline
Thanks Meter: 1,045
Quote:
Originally Posted by mibwel View Post
How can i reset kg lock status of Samsung A107f, please help if anyone have an idea
Hello. You need to use testpoint to force BROM mode in samsung phones.
  Reply With Quote
Old 08-25-2021, 16:58   #55 (permalink)
Junior Member
 
Join Date: Aug 2021
Location: Pakistan
Posts: 18
Member: 2993836
Status: Offline
Thanks Meter: 0
Nokia 1 TA-1047 FRP Removed Successfully! Pandora Box

Nokia 1 Ta-1047
FRP Removed Successfully
Just One Click

Log:
Code:
Selected model: Nokia TA-1047 (Nokia 1)
Operation: Erase FRP
Software version: 2.2

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Get sec config... OK [00000001]
Active sec flags: [SBC]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0x9A10A66C, 0x631E3BA3, 0x38442797, 0x1B7D64E1
Get sec config... OK [00000000]
Get BROM version... OK
Search DA... OK [10]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Check bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x150100464E36324D4203EC2AE4541583
Load EMI config from database [DB VER: 164 DB DATE: 07-17-2021] OK [1]
Trying EMI [49120D13, 8F23A064, 87405777, 45F0C626, 369EC3D6, 8563CCE3, 8AF57810, 51032BB4, 14A4834B]
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
   EMMC_ID   : 0x150100464E36324D4203EC2AE4541683
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0000080000 (512.00Kb)
   EMMC_USER : 0x01D2000000 (7.28Gb)
RAM INFO:
   INT_SRAM: 0x0000020000 (128.00Kb)
   EXT_RAM : 0x0040000000 (1.00Gb)
Check USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Wait for device... OK
High Speed USB detected at COM0
Open port... OK
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read partition frp... OK
Format EMMC_USER partition... OK
Writting FRP data... OK
Erase FRP done!
BR,
GSMCity
  Reply With Quote
Old 08-27-2021, 07:28   #56 (permalink)
Junior Member
 
Join Date: Dec 2016
Posts: 30
Member: 2657592
Status: Offline
Thanks Meter: 15
Selected model: Alcatel 5010D (Pixi 4 (5))
Operation: Repair
Software version: 2.4

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 6580
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Get sec config... OK [00000000]
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM284 [BROM]
Open port... OK
Get HW code from device... 6580
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0x8C7EA7E6, 0x1980E4DF, 0xB3CBDE04, 0x7E42511A
Get sec config... OK [00000000]
Get BROM version... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Check bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x460001154D323237374B0042C573C5E4
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_ID : 0x150100463732324D42004B37E4C573C5
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000080000 (512,00Kb)
EMMC_USER : 0x01D2000000 (7,28Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128,00Kb)
EXT_RAM : 0x0040000000 (1,00Gb)
Check USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Wait for device... OK
High Speed USB detected at COM285
Open port... OK
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Get OTP size... OK [0x00800000]
Read OTP... OK
IMEI 1: 357652075364379
IMEI 2: 357652075364395
Set new IMEI to:
IMEI 1: 358511029552373
Check OTP status... [S_DA_OTP_LOCKED]
Write OTP... error(S_ERROR)
Repair Security done!


sofware fixx
  Reply With Quote
Old 08-30-2021, 08:37   #57 (permalink)
Crazy Poster
 
Join Date: Jan 2011
Posts: 53
Member: 1485943
Status: Offline
Thanks Meter: 54
Selected model: Samsung SM-A125F (Galaxy A12)
Operation: Read Flash Info
Software version: 2.4

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM17 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2D42B746, 0xCD4F05F7, 0xC62822D6, 0x5F0E172D
Get Chip ID... [MT6765]
Get SOC ID... [7F02D418DC3615F044495CD3212FFF5A32E5D6018DBF474F64 CCDB205C097D53]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445036444142002C14E8013827
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x150100445036444142002C14E8013827
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Read Flash Info done!
  Reply With Quote
Old 08-30-2021, 08:38   #58 (permalink)
Crazy Poster
 
Join Date: Jan 2011
Posts: 53
Member: 1485943
Status: Offline
Thanks Meter: 54
Selected model: Samsung SM-A125F (Galaxy A12)
Operation: Read Flash Info
Software version: 2.4

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM17 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2D42B746, 0xCD4F05F7, 0xC62822D6, 0x5F0E172D
Get Chip ID... [MT6765]
Get SOC ID... [7F02D418DC3615F044495CD3212FFF5A32E5D6018DBF474F64 CCDB205C097D53]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445036444142002C14E8013827
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x150100445036444142002C14E8013827
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Read Flash Info done!
  Reply With Quote
Old 08-30-2021, 12:16   #59 (permalink)
No Life Poster
 
Join Date: Feb 2007
Posts: 1,976
Member: 455304
Status: Offline
Thanks Meter: 395
Quote:
Originally Posted by (:: GSMCity ::) View Post
Xiaomi Redmi 9A
MI Account Removed
Just One Click


Log:
Code:
Selected model: Xiaomi M2006C3LG (Redmi 9A)
Operation: Wipe Partitions
Software version: 2.3

Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xAEBE887A, 0xD6E615B2, 0xADBBF255, 0x059E8F3D
Get Chip ID... [MT6765]
Get SOC ID... [ED535D5190162BD9C16D5890636FED0F07FF863A8342DBA7F5DC5811BB67A4DD]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x45010044413430333201D1DD6D134733
Load EMI config from database [DB VER: 164 DB DATE: 07-17-2021] OK [1]
Trying EMI [46F6F1CA, 22BA5289, 92392267, EB371E79, C3498624, 7770139F, C0129602, E6CB89A3, CB03FF37, 11593C4B, 33A1CDBE, 7805E65B, DB7E1DC4, E055C125, 6526FBD5]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_ID   : 0x45010044413430333201D1DD6D134733
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Format "persist" partition... OK
Format Partitions done!
BR,
GSMCity

remove or bypass if connect to the internet lock back>?
  Reply With Quote
Old 08-30-2021, 16:16   #60 (permalink)
Z3X
Product Supporter
 
Join Date: Feb 2008
Posts: 3,783
Member: 706257
Status: Offline
Thanks Meter: 1,045
Quote:
Originally Posted by shawn4life View Post
remove or bypass if connect to the internet lock back>?
If find device off - its permament. If find device on - need erase persist and after install vpn to block xiaomi server.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 21:06.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.30540 seconds with 7 queries

SEO by vBSEO