Send 2nd DA... error(1) - GSM-Forum

tahernike · 07-15-2021, 21:08

i rty connect many phone and make read flash info
give me this issues
i try infinix xiaomi alcatel same error

Code:

Selected model: Infinix X656 (Infinix Note 7 Lite)
Operation: Read Flash Info
Software version: 2.1

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM331 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x47E124EA, 0x46531DEB, 0x8109E5F7, 0xD751367F
Get Chip ID... [MT6765]
Get SOC ID... [4913225E5700660E67FBD93DC96FE60441BBA73B03B711DF08E361E56C12FBFA]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E53304A394B391018D76430279D
Load EMI config from database [DB VER: 162 DB DATE: 07-09-2021] OK [1]
Trying EMI [C41C94FB, F6969C3D, 4C76F2A3, 85DF9841, AF66D99A, EB371E79, 13C39799, A5FE5CDA, 10D75741, D8F5BD39, 40457DA8, AD4E4796, F83EEC01, 154C2947, 1A304479]
Init EXT RAM... OK
Send 2nd DA... error(1)

IMEI_info · 07-16-2021, 08:51

Try another USB port or better quality cable tat box is connected to the computer.

shift2 · 07-16-2021, 12:29

I tried several cables, more than one model of phones, and more than one computer, but no use.

Z3X · 07-16-2021, 12:34

Quote:

Originally Posted by shift2

I tried several cables, more than one model of phones, and more than one computer, but no use.

Hello. You have same log? Attach please screeshot with error.

tahernike · 07-16-2021, 13:47

I try in another computer and another usb port
And i try update driver
Just one mobile work xiaomi note 8 pro
I try many another phone same issue

Z3X · 07-16-2021, 14:30

Quote:

Originally Posted by tahernike

I try in another computer and another usb port
And i try update driver
Just one mobile work xiaomi note 8 pro
I try many another phone same issue

Can you attach screenshot from software with this error.

..::GMSR::.. · 07-16-2021, 14:37

i have describe it, just select the same model firmware with scatter then try for your expected job. at this moments only you cannot wipe user data partition.

Z3X · 07-16-2021, 14:48

Quote:

Originally Posted by ..::GMSR::..

i have describe it, just select the same model firmware with scatter then try for your expected job. at this moments only you cannot wipe user data partition.

Please kindly provide screenshot as example.

shift2 · 07-16-2021, 17:18

Quote:

Originally Posted by Z3X

Please kindly provide screenshot as example.

This is a picture, please help

Z3X · 07-16-2021, 17:31

Quote:

Originally Posted by shift2

This is a picture, please help

And you connecting redmi note 9 as selected in software?

shift2 · 07-16-2021, 18:09

Selected model: Xiaomi M2003J15SS (Redmi Note 9)
Operation: Erase FRP
Software version: 2.1

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM82 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x151569C2, 0x1AE6663B, 0xEDFAD573, 0xF9AB2EE7
Get Chip ID... [MT6768]
Get SOC ID... [6E25B01200DA92C911FB5668FD5083FD449FE6B9405B091819 67D20559FEF59D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [25]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E53304A394A38101F207D537791
Load EMI config from database [DB VER: 162 DB DATE: 07-09-2021] OK [1]
Trying EMI [1BB1F176, AF66D99A, 85DF9841, F359AA15, 4C76F2A3, 1A304479, F1ADA01B, 293BC252, 154C2947]
Init EXT RAM... OK
Send 2nd DA... error(1)

Quote:

Originally Posted by Z3X

And you connecting redmi note 9 as selected in software?

Z3X · 07-16-2021, 18:26

Quote:

Originally Posted by shift2

Selected model: Xiaomi M2003J15SS (Redmi Note 9)
Operation: Erase FRP
Software version: 2.1

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM82 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x151569C2, 0x1AE6663B, 0xEDFAD573, 0xF9AB2EE7
Get Chip ID... [MT6768]
Get SOC ID... [6E25B01200DA92C911FB5668FD5083FD449FE6B9405B091819 67D20559FEF59D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [25]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E53304A394A38101F207D537791
Load EMI config from database [DB VER: 162 DB DATE: 07-09-2021] OK [1]
Trying EMI [1BB1F176, AF66D99A, 85DF9841, F359AA15, 4C76F2A3, 1A304479, F1ADA01B, 293BC252, 154C2947]
Init EXT RAM... OK
Send 2nd DA... error(1)

You dont answered to my question. You connecting now redni note 9?

shift2 · 07-16-2021, 18:52

Quote:

Originally Posted by Z3X

You dont answered to my question. You connecting now redni note 9?

Yes, of course connecting now redni note 9

Z3X · 07-17-2021, 10:21

Quote:

Originally Posted by shift2

Yes, of course connecting now redni note 9

Please give model from menu and firmware version. We will check this with our test phone.

shift2 · 07-17-2021, 20:21

Quote:

Originally Posted by Z3X

Please give model from menu and firmware version. We will check this with our test phone.

Regardless of the make and model of the phone, nothing I try to do fails

07-16-2021, 08:51	#2 (permalink)
IMEI_info No Life Poster Join Date: Oct 2017 Location: on google.com Posts: 2,083 Member: 2771307 Status: Offline Thanks Meter: 772	Try another USB port or better quality cable tat box is connected to the computer.

07-16-2021, 12:29	#3 (permalink)
shift2 Junior Member Join Date: Jun 2019 Location: I live in Syria Posts: 5 Member: 2913071 Status: Offline Thanks Meter: 0	I tried several cables, more than one model of phones, and more than one computer, but no use.

07-16-2021, 13:47	#5 (permalink)
tahernike Freak Poster Join Date: Apr 2007 Location: turkey Age: 35 Posts: 415 Member: 495542 Status: Offline Sonork: 100.1650191 Thanks Meter: 45	I try in another computer and another usb port And i try update driver Just one mobile work xiaomi note 8 pro I try many another phone same issue

07-16-2021, 14:37	#7 (permalink)
..::GMSR::.. No Life Poster Join Date: Nov 2010 Location: RSA-2048 Age: 38 Posts: 1,716 Member: 1444462 Status: Offline Thanks Meter: 1,337	i have describe it, just select the same model firmware with scatter then try for your expected job. at this moments only you cannot wipe user data partition.