![]() |
P30 Pro dead after FRP Hi, I've an P30 Pro (VOG-L29c), phone was fully working, only FRP locked, bootloader locked. Tried Erase FRP via Testpoint but unfortunately i selected Hi980_unlocked instead HI980. Software after operation stucked at waiting for fastboot. Now phone is dead and enter only "Huawei USB COM 1.0", tried Erase FRP via HI980, but after that phone still dead. Is there any solution to unbrick it? Unfortunately don't know previous firmware(can't check it now), i'm sure it was on adnroid 10. |
Log from Erase FRP via HI980_unlocked [USB 1.0] ERASE FRP Selected Model : HiSilicon Kirin 980 Code Name : Hi980_Unlocked Operation : Kirin Testpoint [2] **Authenticating... OK **Retrieving data... OK [4,56 MiB] Scanning port... COM4 Connecting to port... OK **Connection : USB 1.0 Full-Speed **USB Driver : [HUAWEI Incorporated] HSPL_usbvcom - Version : 2.0.5.0 Initializing... OK Writing patch1... OK 1,603s Writing patch2... OK 0,261s Writing patch3... OK 1,058s Reading partition map... OK [71] Searching for bootloader key... OK [3:10485760:5242880] Patching bootloader... OK Please disconnect device and enter testpoint again! Scanning port... COM4 Connecting to port... OK **Connection : USB 1.0 Full-Speed **USB Driver : [HUAWEI Incorporated] HSPL_usbvcom - Version : 2.0.5.0 Writing sec_usb_xloader... OK 1,290s Writing sec_usb_xloader2... OK 0,344s Writing unlock1... OK 0,622s Writing unlock2... OK 0,121s Writing sec_fastboot... OK 31,189s Waiting for fastboot... Log from Erase FRP via HI980 USB 1.0] ERASE FRP Scanning port... COM4 Connecting to port... OK Connection : USB 1.0 Full-Speed USB Driver : [HUAWEI Incorporated] HSPL_usbvcom - Version : 2.0.5.0 Selected Model : HiSilicon Kirin 980 [FRP] Code Name : Hi980 Operation : Erase FRP [1] Authenticating... OK Retrieving data... OK [121,17 KiB] Writing unlocktool1... OK 1,685s Writing unlocktool2... OK 0,278s Writing unlocktool3... OK 1,023s Reading partition map... OK [3] Searching FRP Lock... OK [2:524288:524288] Erasing FRP... OK UNLOCKTOOL 2021.12.29.0 Elapsed time : 26 seconds |
Status update Phone is alive, my bad, i must do the testpoint to hard on motherbard, tp shorted to GND, that's why it was booting into bootloder only, after removing short phone fully working without FRP. Thanks Best Regards |
All times are GMT +1. The time now is 00:17. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -