BE4 freeze after update - GSM-Forum

Beni123 · 06-25-2004, 19:57

I updated my flash
old:
BE41W-1AWLHU1
Amd, 2Mb
IMEI: 332157-53-383099-5
ver: 135
with a new on:
be43w-1betcz2-139-03-amd.bin
when i power on the phone type the pin and when phone is connecting to the provider (Westel), and it freeze than reboot.
i tried it with many different flashes from 135-3 -> 139, with the same result.
i read somewhere that I have to write 4000-5FFF from the original flash, but it's not working either.
I read somewhere that i have to ron "loto" repairer, but it's not running, it stay at 4%.
sorry if it was already in this forum, but I can not find it..

is there any solution for this? (100% there is solution, but i can not find it

(i think i posted every importat infof, say if I am not.)
thanx a lot

Beni123 · 06-26-2004, 13:45

now i tried to write with martech the loto's zones (4000-5fff) but i give up at avou 10.bin, and it's not working i tried write into 4000-5fff the original flash's 4000-5ff, but phone does not power on.
i tried with that type of flash: be43w-1betcz2-139-03-amd.bin

Beni123 · 06-26-2004, 14:26

LOL

the 11.bin was ok..

now 139 03 software is ok

matrix05300 · 07-01-2004, 16:07

Hi

Have BE42w, flashed it with the same be43w-1betcz2-139-03-amd.bin

saved tech zone before, flashed it, and uploaded tech zone

but phone still freeze, and restart

tried with loto repair from 1 to 52 but no one worked for me

any idea

Beni123 · 07-05-2004, 18:56

Hi!
-Do U have amd chip?
-try with martech 4000-5FFF write the 11. bin
- write other flash into it.
-write the original flash. (i don't know what new in 139

keany · 07-07-2004, 15:33

good replay man.................................

06-25-2004, 19:57	#1 (permalink)
Beni123 Junior Member Join Date: Jun 2004 Age: 40 Posts: 15 Member: 70104 Status: Offline Thanks Meter: 0	BE4 freeze after update I updated my flash old: BE41W-1AWLHU1 Amd, 2Mb IMEI: 332157-53-383099-5 ver: 135 with a new on: be43w-1betcz2-139-03-amd.bin when i power on the phone type the pin and when phone is connecting to the provider (Westel), and it freeze than reboot. i tried it with many different flashes from 135-3 -> 139, with the same result. i read somewhere that I have to write 4000-5FFF from the original flash, but it's not working either. I read somewhere that i have to ron "loto" repairer, but it's not running, it stay at 4%. sorry if it was already in this forum, but I can not find it.. is there any solution for this? (100% there is solution, but i can not find it (i think i posted every importat infof, say if I am not.) thanx a lot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
freeze on after update v5.5.8	jason_W	NSPRO	10	12-18-2009 07:06
After installig UST Pro2 on new PC just freeze after start.	mtmobiltech	UST Pro II	10	08-25-2009 06:09
BE4 Dead after after unlock	Sullykaka	Alcatel & TCL Old Models	10	08-21-2007 21:26
WARNING BE4 dead after READING flash	-Neb	Alcatel & TCL Old Models	4	04-19-2001 00:03

06-26-2004, 13:45	#2 (permalink)
Beni123 Junior Member Join Date: Jun 2004 Age: 40 Posts: 15 Member: 70104 Status: Offline Thanks Meter: 0	now i tried to write with martech the loto's zones (4000-5fff) but i give up at avou 10.bin, and it's not working i tried write into 4000-5fff the original flash's 4000-5ff, but phone does not power on. i tried with that type of flash: be43w-1betcz2-139-03-amd.bin

06-26-2004, 14:26	#3 (permalink)
Beni123 Junior Member Join Date: Jun 2004 Age: 40 Posts: 15 Member: 70104 Status: Offline Thanks Meter: 0	LOL the 11.bin was ok.. now 139 03 software is ok

07-01-2004, 16:07	#4 (permalink)
matrix05300 No Life Poster Join Date: Jan 2004 Location: Algeria Posts: 815 Member: 49494 Status: Offline Thanks Meter: 40	Hi Have BE42w, flashed it with the same be43w-1betcz2-139-03-amd.bin saved tech zone before, flashed it, and uploaded tech zone but phone still freeze, and restart tried with loto repair from 1 to 52 but no one worked for me any idea

07-05-2004, 18:56	#5 (permalink)
Beni123 Junior Member Join Date: Jun 2004 Age: 40 Posts: 15 Member: 70104 Status: Offline Thanks Meter: 0	Hi! -Do U have amd chip? -try with martech 4000-5FFF write the 11. bin - write other flash into it. -write the original flash. (i don't know what new in 139

07-07-2004, 15:33	#6 (permalink)
keany No Life Poster Join Date: May 2004 Location: gsm-land Age: 45 Posts: 755 Member: 67419 Status: Offline Thanks Meter: 237	good replay man.................................