Haier D1000 Unlock Solution Free
 

Here Is The Tutorial To Unlock & Flash Haier D1000

Files Comming In A Little While

where download software ???

please give link .

can you please post cable pin outs and usb driver for the d1000 and what do we need to read a pps file

its old solution dude

http:///vbb/showth...ighlight=haier

wbr

FREE AND EASY download is available for members who has problem with RAPIDSHARE.

http://forum.gsmhosting.com/vbb/show...17#post2421317

wbr
AshwaniGaur

THE SOLUTION IS OLD BUT NOT COMPLETE COS THEIR R NO DRIVERS TO CONNECT THE PHONE TO PC HERE IS THE COMPLETE SOLUTION WITH THE DRIVER



http://rapidshare.com/files/29744115...plete.rar.html


JUST START THE DRIVER SETUP AND INSTALL
THE DRIVERS WILL BE INSTALLED TO
x:\Program Files\VIA Telecom\VIA CBP USB Driver

AFTER CONNECTING SET TO CABLE IT WILL ASK FOR DRIVER GIVE THE ABOVE MENTIONED PATH FOR DRIVERS
TOTAL 3 DRIVERS WILL BE INSTALLED AFTER THAT UR READY TO WORK
THE REST OF THE PROCESS CAN BE READ FROM THE TUTORIAL ATTACHED IN THE FIRST POST

NOTE:
1. CABLE TO BE USED IS COMMON MINI USB CABLE (DATA CABLE OF MOTOROLA V3 ALSO FOUND IN SOME CARD READERS)

2. FOR VIEWING PPS FILE U NEED MICROSOFT POWER POINT OR POWER POINT VIEWER.

thanks for your help

THANKS @ A1 Cell Solution

if any member have probelm with Rapidshare, pls post , i will upload it to my ftp.

FREE and EASY Download

wbr
AshwaniGaur

Thank you brother for full solution and full support.
WBR
M.J.Akhtar

please help me. my haier d1000 mobile is after flashing with this software always show "MIN out of range- please insert valid UIM"

Please help me. after reflash my mobile is not working. if insert UIM only lite is blinking if UIM not inserted there is a messege "Please insert UIM" but now Mobile is always not working.

any one can help me?

there are 2 script file use 2nd 1

wbr

2nd script file has a error my mobile is copleletely dead now and ca't conecting with usb cable now. I go to haier authorised service center with my mobile.

my haier d1000 mobile is after flashing with this software always show "MIN out of range
please insert valid UIM"

Please help me. after reflash my mobile is not working. if insert UIM only lite is blinking if UIM not inserted there is a messege "Please insert UIM" but now Mobile is always not working.

help me?


2nd script file has a error my mobile is copleletely dead now and ca't conecting with usb cable now. I go to haier authorised service center with my mobile.