Dejan Flasher - GSM-Forum

Sampaio · 06-24-2001, 17:58

Hi guys,

I can't get my Dejan Flasher to work. I tryed with no shell, with various shells, with two 3210 6.00, with one 3210 5.31. I checked the cable connections and I always get a message: boot count. The phone lights up and then powers off. After that I can only get it to power up if I remove the battery. My cable uses the Vpp.

Can someone help me out with this?

Thanks in advance.

InKola · 06-24-2001, 20:12

Mas isso já teve a funcionar ou é a 1ª vez que experimentas ?
Pode ser dos cabos...

aZyWeRks · 06-24-2001, 20:37

Quote:

Originally posted by Sampaio:
<STRONG>Hi guys,

I can't get my Dejan Flasher to work. I tryed with no shell, with various shells, with two 3210 6.00, with one 3210 5.31. I checked the cable connections and I always get a message: boot count. The phone lights up and then powers off. After that I can only get it to power up if I remove the battery. My cable uses the Vpp.

Can someone help me out with this?

Thanks in advance.</STRONG>

Make sure that your batteries are well charged (not necessarily full). If your phone lits up, something is wrong with your connection/contacts or your flasher is just faulty.

For verification purposes, try to use Jethro 3.11 and see if it detects your unit. If not then the problem is hardware. If yes, then your problem is with your boot loaders.

Also, try to see if your flasher works with other units, say a 5110 perhaps. 3210 connectors can be a bit cumbersome at times.

regards,

aCe

Sampaio · 06-24-2001, 22:37

Thanks for your replies.

I must say that I just built the cable. It never worked before.
Batteries are fully carged. To try the Jethro SW don't I need another cable?

I have checked the cables many times, it all seems to be ok, but I'll check it again. I get 4.44 V of power supply after the two 1N4148 diodes. Is this a good value?

Thanks again.

06-24-2001, 17:58	#1 (permalink)
Sampaio Insane Poster Join Date: May 1999 Location: Portugal Posts: 72 Member: 51 Status: Offline Thanks Meter: 2	Dejan Flasher Hi guys, I can't get my Dejan Flasher to work. I tryed with no shell, with various shells, with two 3210 6.00, with one 3210 5.31. I checked the cable connections and I always get a message: boot count. The phone lights up and then powers off. After that I can only get it to power up if I remove the battery. My cable uses the Vpp. Can someone help me out with this? Thanks in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia flasher Shell for Dejan Flasher beta	schwantz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	10-17-2001 00:36
Anti nokia flasher ver1 for dejan flasher satart with autoupdate with no limit	AMTX99	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	22	04-22-2001 18:47
Dejan Flasher and 4 locks EEEE FFFFF....	Corund	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	22	02-19-2001 10:20
Dejan Flasher with 6110 5.24	gsmxc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-13-2001 05:56
Connecting Dejan Flasher to Nokia 61xx	gsmxc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-07-2001 22:09

06-24-2001, 20:12	#2 (permalink)
InKola Insane Poster Join Date: Mar 2000 Posts: 66 Member: 1041 Status: Offline Thanks Meter: 0	Mas isso já teve a funcionar ou é a 1ª vez que experimentas ? Pode ser dos cabos...

06-24-2001, 22:37	#4 (permalink)
Sampaio Insane Poster Join Date: May 1999 Location: Portugal Posts: 72 Member: 51 Status: Offline Thanks Meter: 2	Thanks for your replies. I must say that I just built the cable. It never worked before. Batteries are fully carged. To try the Jethro SW don't I need another cable? I have checked the cables many times, it all seems to be ok, but I'll check it again. I get 4.44 V of power supply after the two 1N4148 diodes. Is this a good value? Thanks again.