8210 no network after flashing, look in - GSM-Forum

simbirley · 05-31-2001, 15:10

I flashed an 8210 from 0020000-003d0000 as somebody had tried to unlock it from the wrong start address.
now there is no signal no matter which network it is on.
eg. it comes on and says orange then the network is lost and no calls can be made.

is there a solution to this?
the phone is version 5.25

wildwhacker · 06-06-2001, 00:18

DEPENDS WAS THIS A WORKING UNIT PREVIOUSE TO THE WRONG ADDRESS FLASH?
did you put the right version flash back in??
remove the front cover turn the unit on its front and look between the board and housing on the left you will see a gold contact coming from the aerial to the board. make sure it makes good connection with the pcb.

CHATAR · 06-06-2001, 02:23

no no no
dont loock for harware whyn you flash your phone with not originel flash
after flashing not netwerk
you most flash your phone back with the originel full flash

best regards

simbirley · 06-06-2001, 13:24

This should not be a flash problem as i have flashed it back with original backup.
there is just no network and it is not banned from any.
i will check the hardware thing though it was working prior to flashing.

05-31-2001, 15:10	#1 (permalink)
simbirley Freak Poster Join Date: Apr 2001 Posts: 353 Member: 4398 Status: Offline Thanks Meter: 1	8210 no network after flashing, look in I flashed an 8210 from 0020000-003d0000 as somebody had tried to unlock it from the wrong start address. now there is no signal no matter which network it is on. eg. it comes on and says orange then the network is lost and no calls can be made. is there a solution to this? the phone is version 5.25

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No network after flashing U8500 with unlocked flash - What's wrong?	James_S	FuriousGold	9	05-10-2008 13:56
8210 no network after reflow	badass639	Nokia Hardware & Hardware Repair	1	04-04-2002 16:32
8210 no network after MAD2 IC changed	Chaku	Nokia Hardware & Hardware Repair	6	11-12-2001 23:22
8210 no network after flashing, look in	simbirley	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-01-2001 08:57

06-06-2001, 00:18	#2 (permalink)
wildwhacker Freak Poster Join Date: Feb 2001 Location: england Posts: 444 Member: 3348 Status: Offline Thanks Meter: 3	DEPENDS WAS THIS A WORKING UNIT PREVIOUSE TO THE WRONG ADDRESS FLASH? did you put the right version flash back in?? remove the front cover turn the unit on its front and look between the board and housing on the left you will see a gold contact coming from the aerial to the board. make sure it makes good connection with the pcb.

06-06-2001, 02:23	#3 (permalink)
CHATAR Freak Poster Join Date: Apr 2001 Location: Belgium Posts: 216 Member: 4378 Status: Offline Thanks Meter: 0	no no no dont loock for harware whyn you flash your phone with not originel flash after flashing not netwerk you most flash your phone back with the originel full flash best regards

06-06-2001, 13:24	#4 (permalink)
simbirley Freak Poster Join Date: Apr 2001 Posts: 353 Member: 4398 Status: Offline Thanks Meter: 1	This should not be a flash problem as i have flashed it back with original backup. there is just no network and it is not banned from any. i will check the hardware thing though it was working prior to flashing.