9210 unlock,how?
 

Hi!

Tried to unlock 9210 with nokiatool 1.8 by rolis and with dejan`s nk_calc,but no success... rolis tool sayz: Init SP Lock failed.
All other function work (eg. imei change too).
Please help!

9210 unlock, how?
 

i had a 9210 (v3.18 , RAE-3) with 4 LOCKS and i un-locked it with eeprom tools on the normal way....

Knok and Rolis Nokiatool doesn't support the 9210. The 9210 uses some DTC4 and some DTC3 technics.
Regards,

BB

Use Eeprom tools to unlock the phone as I know this works, as for the other 2 not sure why it don't unlock the phone as it's built around the same software so it should work.:confused:

Thanx,Eeprom Tools v3 WORKING!:)

Eeprom Works
 

After the advice by Lonegunman I've used Eeprom several times... Works a treat ;) Cheers or that one m8.

@Bingbong
9210 ----> DCT-3 and can flash it with original equipment for the DCT-3

Best regards :)

Is it the 9210 with a colour screen. How come mine is refusing or is it the 9210i

9210 colour screen as well as the 9210i and I have been told that you can unlock with eeprom tools but I have not tested as of yet.

I think the 9210i might not be possible.

A phoned me up who had sent their 9210i to an online unlocking service and he got it back from them saying that they couldn't do it... And these guys know what they're doing as well.

I've never done a 9210i, but I did 5 x 9210s this weekend - no problem.

Next time you get a 9210i try and read the phone with nokia tool, if it reads the phone eeprom tools will unlock it, if it don't then it can't.

what cable fits the 9210

Humm.......try the seach button and you will find, but for lazy people it's the 9110 m/bus cable (it has 4 pins on the end).

wouww.....many opinion here about unlock 9210 but no body can give right solution....;)
i think this very simpliest and easiest way to unlock 9210.
Use Logo manager soft. and connect use Mbus cable 9210 (you can use the cable attached but firstly you have activate Netmonitor and change menu no. 31 to mbus mode). after connect to logo manager press F9 button. you can see security code number at there. FINISHED!!
Too easy huh....;)

Good luck all...!!!

best regards.
=nickfg=

____________________________

firstly you have activate Netmonitor
____________________________

How do u activate netmonitor when the cable does not detect. I have one 9210 i dont even know whether its a 9210 or9210i how can i know