dead 3210
 

Hi guys!
I have a dead 3210 v5.31! I'm not sure what happened but by mbus, I closed all locks (I don't now how) and after that I started to use a flasher. I got an error message like this: "Erase flash error!", since then I can't turn on the phone and every time I try to put there a full flash it gaves me the same error. What I must do now?

Thanks in Advance
[email protected]

Try to use another F_loader.... it seems to be a atmel flash... see flash ID that flasher shows and find right f_loader.

Regards

You have to flash and write a new eeprom to solve your problem. Your eeprom is f***** up.

pick a friends 3210 and clone his flash and eeprom

BR
BillyJoe

Hi,

Erase Flash Error is an error because you're not using the correct f_loader! Just download dark's shell and select boot loader 868 and flash loader normal. :D
www.crosswinds.net/~darklemming

Best Regards,

KiCK :eek:

It's not f_loader problem.i have also 3210
with this flashing bug when i chose correct loader phone says "earse flash error" and when i use other intel loaders the phone accepts flashing but loose signal and hangs up or reboots.by jethro 3.11 ican read flash
ID:00898890 and flash type 28f160b3.t
notice that it's a 16bit flash but it accept being flashed with 8bit one

One question, did you use your original flash backup or you used another flash from somebody elses site? The symptoms that you mentioned are usual to phones that are uploaded with flash having different PPM package than that of its original flash(i.e. Flash A with C). Try uploading it with a flash that has the same package as your original.

Changing loaders should work on the problems as posted earlier. However, if symptoms persist, try uploading the whole flash 64kb at a time (i.e chop it into 64kb chunks). ;)


All the best,

:D aCe :D

Hi
I think you're right when i got the phone it was totally dead i flashed with full fls from fatums site i'll try other files and see what happens.but the problem is that i can not find a site many flash files
regards