Does Nokia Tool v1.5b by Rolis work? - GSM-Forum

philkho · 03-04-2002, 15:12

Someone sent me this file and I'd like to know if this program works ok?

dito · 03-04-2002, 15:43

Try it...

And yes it works!

Best regards!

blacklisted · 03-04-2002, 21:37

i used to use my cable with noktool s/w and it reads the fone fine when i use the v1.5b br rolis it does nothing the erroe at the bottom of the screen say m2bus error

Winner58 · 03-05-2002, 00:26

hi
the cable must be only M-Bus and not F/M-Bus!!!!
the proggi works
the unlock-buttons alone works not, you must press to "all open". its works.
regards
Winner 58

Mikka · 03-05-2002, 00:59

The programs works for me with F/M-bus "dual" cable, for faid & for "unlock-button".
I tested it!

ed2k_7 · 03-05-2002, 01:20

Yes it works, if you need pure MBUS cable just call or email me...

DCAvdP · 03-05-2002, 01:30

Yes it works....

Only inportant thing missing is the ROM-indicator which
EEPROMTools from BPhreaks has.

Maybe Rollis can implement this too.

That would be nice......................

(now lets hope Rollis reads this

rolis · 03-05-2002, 03:23

Hi

Thanks for suggestions and opinions.
Best results are with m2bus cable like for nk_calc.com.
If anyone have cable schematics,which aren't supported ,you
may send it me personally.

@DCAvdP :Rom version?It's verry easy to make,but does it necessary ?I'm disabled IMEI+Splocks initialisation on ROM3,
so you don't have to worry about ROM version or sw type.
You don't damage old rom3 phones,even if you wish.

Check link www.rolis.freeservers.com for updates or news
until i've get better server.

BR,
rolis

Mad4IT · 03-05-2002, 06:11

Y?????
Why???
Why did u disable ROM3???? :-( I have this 5110 4.59 ROM3 that i try to fix...downloaded your sw (thank you very much!!) but it tells me it won t support ROM3!!!!! :-(
I need to fix my no network problem...i have fixed both IMEIs (not sure how!) probably with Nk_calc and WinTesla but now, no Network and reboot!!!

If anyone finds any solution!!!!
Cheers!!

P.S. @Rolis thank you for your reply on that other topic!!

Sturmovogel · 03-05-2002, 06:44

Nice tool

but i have one question to U
may be You make one programm with flashing,unlocking, MCU&PPM update, and FAID calculation ??? As i am, if U insert this functions in 5.14 flasher or higher - it be very very cool prog
thanks.

P.S.

Sorry for bad English

cIVIc · 03-05-2002, 07:20

100% work
good tool.

B.r.
Henry

welly2000 · 03-05-2002, 09:35

hi all
i can't download any one can send to me

hanoon · 03-05-2002, 10:25

waleed contact me online i'll send it to you...

good luck!

TheEckoMan · 03-05-2002, 14:45

This program is mad!
I would have to say its the best for changing IMEI!
Well done rolis bro!

rolis · 03-05-2002, 17:01

@Mad4IT : read my (and other ppl) post about ROM3 problems here :
http://forum.gsmhosting.com/vbb/show...threadid=33817
Software upgrade for ROM3 i'm not removed,cause it works Ok.
Just IMEI and Sp locks.
Like said Alex
"........
- To all who asked about DSP 3 - sorry my source is your source.
Maybe you have to ask the man for the missing hash tables
........"

@Sturmovogel : it are already maked,just until i'm not finished,
it will be not released.
I think , here must be not very big problems move from flasher to m2bus software.Additional - needs to include more functions in flasher (remove useless partials at least ...)

@welly2000 : you must go on html page and press on link,then shoose download option on IE (disable GoZilla,DAP,...etc.)

@TheEckoMan : here are great sw too from Bph&co and Tibor (kNok)

To all : better do not post greetings,100X"send me too",just bugs reports ........
or happens like with posts:
http://forum.gsmhosting.com/vbb/show...threadid=34208
http://forum.gsmhosting.com/vbb/show...threadid=34179

Regards,
rolis

03-04-2002, 15:12	#1 (permalink)
philkho Crazy Poster Join Date: Feb 2001 Location: Manila, Philippines Posts: 58 Member: 3367 Status: Offline Thanks Meter: 0	Does Nokia Tool v1.5b by Rolis work? Someone sent me this file and I'd like to know if this program works ok?

03-04-2002, 15:43	#2 (permalink)
dito No Life Poster Join Date: Jan 2000 Posts: 501 Member: 860 Status: Offline Thanks Meter: 1	Try it? Try it... And yes it works! Best regards!

03-05-2002, 01:20	#6 (permalink)
ed2k_7 No Life Poster Join Date: May 2001 Location: Manila, Philippines Age: 53 Posts: 1,373 Member: 4408 Status: Offline Thanks Meter: 5	Phil: Check Mail Yes it works, if you need pure MBUS cable just call or email me...

03-05-2002, 06:11	#9 (permalink)
Mad4IT Crazy Poster Join Date: Feb 2002 Location: Greece Age: 47 Posts: 59 Member: 9711 Status: Offline Thanks Meter: 0	Leave the ROM3 on please!!!! Y????? Why??? Why did u disable ROM3???? :-( I have this 5110 4.59 ROM3 that i try to fix...downloaded your sw (thank you very much!!) but it tells me it won t support ROM3!!!!! :-( I need to fix my no network problem...i have fixed both IMEIs (not sure how!) probably with Nk_calc and WinTesla but now, no Network and reboot!!! If anyone finds any solution!!!! Cheers!! P.S. @Rolis thank you for your reply on that other topic!!

03-05-2002, 06:44	#10 (permalink)
Sturmovogel Junior Member Join Date: Dec 2000 Location: Lviv, Ukraine Posts: 17 Member: 2708 Status: Offline Thanks Meter: 0	to Rolis Nice tool but i have one question to U may be You make one programm with flashing,unlocking, MCU&PPM update, and FAID calculation ??? As i am, if U insert this functions in 5.14 flasher or higher - it be very very cool prog thanks. P.S. Sorry for bad English

03-04-2002, 21:37	#3 (permalink)
blacklisted Junior Member Join Date: Feb 2002 Location: LONDON UK on earth Posts: 31 Member: 9437 Status: Offline Thanks Meter: 0	i used to use my cable with noktool s/w and it reads the fone fine when i use the v1.5b br rolis it does nothing the erroe at the bottom of the screen say m2bus error

03-05-2002, 00:26	#4 (permalink)
Winner58 Member deceased !! Join Date: May 1999 Location: Wien/Austria Age: 65 Posts: 13,150 Member: 5 Status: Offline Thanks Meter: 1,884	hi the cable must be only M-Bus and not F/M-Bus!!!! the proggi works the unlock-buttons alone works not, you must press to "all open". its works. regards Winner 58

03-05-2002, 00:59	#5 (permalink)
Mikka Major Poster Join Date: Nov 2000 Posts: 45 Member: 2663 Status: Offline Thanks Meter: 1	The programs works for me with F/M-bus "dual" cable, for faid & for "unlock-button". I tested it!

03-05-2002, 01:30	#7 (permalink)
DCAvdP Freak Poster Join Date: Apr 2001 Location: -- Posts: 260 Member: 4122 Status: Offline Thanks Meter: 4	Yes it works.... Only inportant thing missing is the ROM-indicator which EEPROMTools from BPhreaks has. Maybe Rollis can implement this too. That would be nice...................... (now lets hope Rollis reads this

03-05-2002, 03:23	#8 (permalink)
rolis Freak Poster Join Date: Aug 2001 Posts: 116 Member: 5786 Status: Offline Thanks Meter: 1	Hi Thanks for suggestions and opinions. Best results are with m2bus cable like for nk_calc.com. If anyone have cable schematics,which aren't supported ,you may send it me personally. @DCAvdP :Rom version?It's verry easy to make,but does it necessary ?I'm disabled IMEI+Splocks initialisation on ROM3, so you don't have to worry about ROM version or sw type. You don't damage old rom3 phones,even if you wish. Check link www.rolis.freeservers.com for updates or news until i've get better server. BR, rolis

03-05-2002, 07:20	#11 (permalink)
cIVIc Freak Poster Join Date: Oct 1999 Age: 59 Posts: 101 Member: 591 Status: Offline Thanks Meter: 1	100% work good tool. B.r. Henry

03-05-2002, 09:35	#12 (permalink)
welly2000 Freak Poster Join Date: Jul 2001 Age: 51 Posts: 427 Member: 5265 Status: Offline Thanks Meter: 2	hi all i can't download any one can send to me

03-05-2002, 10:25	#13 (permalink)
hanoon No Life Poster Join Date: Dec 2001 Location: USA Age: 45 Posts: 596 Member: 8051 Status: Offline Thanks Meter: 6	i have it waleed contact me online i'll send it to you... good luck!

03-05-2002, 14:45	#14 (permalink)
TheEckoMan No Life Poster Join Date: Mar 2001 Location: Australia, Melbourne Age: 37 Posts: 548 Member: 3902 Status: Offline Thanks Meter: 19	This program is mad! I would have to say its the best for changing IMEI! Well done rolis bro!

03-05-2002, 17:01	#15 (permalink)
rolis Freak Poster Join Date: Aug 2001 Posts: 116 Member: 5786 Status: Offline Thanks Meter: 1	@Mad4IT : read my (and other ppl) post about ROM3 problems here : http://forum.gsmhosting.com/vbb/show...threadid=33817 Software upgrade for ROM3 i'm not removed,cause it works Ok. Just IMEI and Sp locks. Like said Alex "........ - To all who asked about DSP 3 - sorry my source is your source. Maybe you have to ask the man for the missing hash tables ........" @Sturmovogel : it are already maked,just until i'm not finished, it will be not released. I think , here must be not very big problems move from flasher to m2bus software.Additional - needs to include more functions in flasher (remove useless partials at least ...) @welly2000 : you must go on html page and press on link,then shoose download option on IE (disable GoZilla,DAP,...etc.) @TheEckoMan : here are great sw too from Bph&co and Tibor (kNok) To all : better do not post greetings,100X"send me too",just bugs reports ........ or happens like with posts: http://forum.gsmhosting.com/vbb/show...threadid=34208 http://forum.gsmhosting.com/vbb/show...threadid=34179 Regards, rolis

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia DCT3 Tool v1.09 by Cyberdog	Cyberdog	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	22	05-17-2002 12:21
Nk_calc and Nokia tool by Rolis worked with f/m bus autoswitch cable.	AD	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	03-21-2002 06:04
Siemens c30 Service Tools v1.0 by Martech	skolnik	NON Siemens Brand (ODM Phones)	2	05-16-2001 20:46
Results of: "Siemens x35 Service Tools v1.7 by Martech"	Stoka	x1x to x45/x50	17	04-30-2001 20:08
Results of: Siemens x35 Service Tools v1.7 by Martech!	Stoka	x1x to x45/x50	1	04-29-2001 22:46