Flash Files On Brad Site - Page 2 - GSM-Forum

bRAd · 03-03-2002, 09:21

hello all,
wintesla flash files is only in "WT_ORIGINAL" directory on my site,
in others is for dejan !! /3310,6210, etc../
but newest flash files is divided to mcu and ppm..
you must download mcu and your needed ppm, and if you use dejan flasher then give mcu+ppm after unziping to one file with this dos command:

copy /b mcu.fls+?.fls

?=ppm letter

now you have created mcu+ppm file

ready for flashing..

sorry for my bad english

bRAd

Yolly Zubrick · 03-03-2002, 09:55

Hi bRAD, thanks for helping out a lot of people by letting your site stay. I just want to bring to your attention that the Full flash of the zip file for 3210 6.00 PPM D contains a different flash inside which is 3210 v6.00 PPM C

I also noticed that the other big download sites have the same error, which leads me to think that they got their soft from your site

Thanks again bRAD, for all your personal help in the past.

bre786 · 03-03-2002, 11:10

Yes I have also used lots of flash files from Brad,s site without any problem.

Regards
bre786

enric666 · 03-03-2002, 11:24

I upgrade my 8210 v5.21 to 5.30 ppm A, with flash from Brad site and works 100% only join mcu file with needed ppm file without cut bytes

banKa · 03-06-2002, 15:48

I can not access the site, what happen??? Please show me the new link if it has benn change!
Best regards,

Nick-A · 03-06-2002, 16:19

Brad, have you got NSK-1 dsp rom 4 flash files please?

Or if anyone has, I would be very grateful, as I desperately need them, just a mcu and ppm pack, any version really.

please email to [email protected]

Thanks,

Nick

03-03-2002, 09:55	#17 (permalink)
Yolly Zubrick Freak Poster Join Date: Jan 2002 Location: Iloilo City, The Philippines Posts: 440 Member: 8396 Status: Offline Thanks Meter: 2	Hi bRAD, thanks for helping out a lot of people by letting your site stay. I just want to bring to your attention that the Full flash of the zip file for 3210 6.00 PPM D contains a different flash inside which is 3210 v6.00 PPM C I also noticed that the other big download sites have the same error, which leads me to think that they got their soft from your site Thanks again bRAD, for all your personal help in the past. Last edited by Yolly Zubrick; 03-03-2002 at 10:01.

03-06-2002, 15:48	#20 (permalink)
banKa Registered User Join Date: Sep 2001 Location: GSM - World Age: 49 Posts: 272 Member: 6169 Status: Offline Thanks Meter: 0	Brad's site was down I can not access the site, what happen??? Please show me the new link if it has benn change! Best regards,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where can i download flash files on support site plz help	asif_ae	FuriousGold	2	02-05-2010 11:22
there is no bb5 flash file on support site	neeraj1st	MT-BOX	9	03-02-2009 09:11
Wrong SE flash files on support site	leosedf	Twisterflasher	0	05-06-2005 11:27

03-03-2002, 09:21	#16 (permalink)
bRAd Freak Poster Join Date: Nov 2000 Location: Czech Republic Posts: 359 Member: 2558 Status: Offline Thanks Meter: 5	hello all, wintesla flash files is only in "WT_ORIGINAL" directory on my site, in others is for dejan !! /3310,6210, etc../ but newest flash files is divided to mcu and ppm.. you must download mcu and your needed ppm, and if you use dejan flasher then give mcu+ppm after unziping to one file with this dos command: copy /b mcu.fls+?.fls ?=ppm letter now you have created mcu+ppm file ready for flashing.. sorry for my bad english bRAd

03-03-2002, 11:10	#18 (permalink)
bre786 Freak Poster Join Date: Sep 2001 Posts: 402 Member: 6200 Status: Offline Sonork: 100.33330 Thanks Meter: 66	Yes I have also used lots of flash files from Brad,s site without any problem. Regards bre786

03-03-2002, 11:24	#19 (permalink)
enric666 Crazy Poster Join Date: Aug 2001 Location: BCN Posts: 53 Member: 5617 Status: Offline Thanks Meter: 0	I upgrade my 8210 v5.21 to 5.30 ppm A, with flash from Brad site and works 100% only join mcu file with needed ppm file without cut bytes

03-06-2002, 16:19	#21 (permalink)
Nick-A No Life Poster Join Date: Jan 2002 Posts: 519 Member: 8249 Status: Offline Thanks Meter: 2	Brad, have you got NSK-1 dsp rom 4 flash files please? Or if anyone has, I would be very grateful, as I desperately need them, just a mcu and ppm pack, any version really. please email to [email protected] Thanks, Nick